User's Manual

56
[GP/CH display setting]
All GP/CH: All groups and channels will be displayed as
candidates when configuring groups and channels. [All
GP/CH] is selected under factory default settings.
Only recommended GP/CH: Only the recommended
groups and channels as determined by the [Channel Plan
Adviser] will be displayed as candidates when configuring
groups and channels. When the [Reflect recommended
GP/CH] checkbox is selected in the last screen of the
[Channel Plan Adviser] before closing it, this setting
changes to [Only recommended GP/CH].
For details, see “[Channel Plan Adviser] Window” on
page 49.
[recommended GP/CH...] button
Displays the recommended groups and channels as
determined by the [Channel Plan Adviser] in a separate
window. Only the groups and channels displayed here will
be displayed as candidates when configuring groups and
channels.
[Display settings] Window
Use this to specify whether to display certain setting items
and buttons. When you select the checkboxes of the items
in each tab and click the [OK] button, the corresponding
items and buttons will be displayed.
[Display] tab
This tab allows you to specify whether to display certain
items in the [Device List] window, status viewer, [Simple
Status Viewer] tab, etc.
Number: Select whether to display the receiver channel
number.
Search Tx button: Select whether to display the button
that makes the screens for transmitters that are paired with
the receiver blink.
• This function is not supported on the DWR-R01D,
DWR-R02D, and DWR-R02DN.
• This function is only available on combinations of 3rd
generation or later digital wireless receivers (such as the
DWR-R03D) and digital wireless transmitters (such as
the DWT-B03R). In addition, when using an RMU-01
for Cross Remote connection, the RMU-01 must be
version 1.27 or later.
Label: Select whether to display the label configured in
the [Receiver CH Label settings] window.
GP/CH: Select whether to display the group/channel
settings for reception channels.
Frequency: Select whether to display the reception
channel frequency.
RF alert: Select whether to display an alert when the radio
wave input level decreases or becomes too high.
RF meter: Select whether to display a meter that indicates
the radio wave input level.
QL alert: Select whether to display an alert when the
quality of the received data decreases.
QL meter: Select whether to display a meter that indicates
the quality of the received data.
Tx Name: Select whether to display the name of the
transmitter.
Output channel: Sets whether to display the audio output
destination of the receiver.
Individual muting/unmuting: Select whether to display
the audio output status for receiver channels.
AF meter: Select whether to display a meter that indicates
the audio level.
AF/Peak alert: Select whether to display AF/PEAK
(audio input/peak) alerts.
Battery status: Select whether to display the transmitter’s
battery condition.
Notes