User's Manual

61
When you change the [Diversity] setting to 2-ANTENNA
for receiver channels 1 and 2, “1” splits into “1” and “2”
and the RF level meters will display 2 lines for each.
[Simple Status Viewer] tab
When you change the [Diversity] setting to 4-ANTENNA
for receiver channels 1 and 2, the display for “2”
disappears and the RF level meters will display 4 lines.
When you change the [Diversity] setting to 2-ANTENNA
for receiver channels 1 and 2, the display for “2” reappears
and the RF level meters will display 2 lines each.
[Property] window
When you change the [Diversity] setting to 4-ANTENNA
for receiver channels 1 and 2, the display and tab for “2”
disappear and the RF level meters will display 4 lines.
When you change the [Diversity] setting to 2-ANTENNA
for receiver channels 1 and 2, the display and tab for “2”
reappear and the RF level meters will display 2 lines each.
[Device list] window
When you change the [Diversity] setting to 4-ANTENNA
for receiver channels 1 and 2, the display for “2”
disappears.
When you change the [Diversity] setting to 2-ANTENNA
for receiver channels 1 and 2, the display for “2” reappears.
[Property List] tab
When you change the [Diversity] setting to 4-ANTENNA
for receiver channels 1 and 2, the display for “2”
disappears.
When you change the [Diversity] setting to 2-ANTENNA
for receiver channels 1 and 2, the display for “2” reappears.
Switching to
4-ANTENNA
Switching to
2-ANTENNA
Switching to
4-ANTENNA
Switching to
2-ANTENNA
Switching to
4-ANTENNA
Switching to
2-ANTENNA
Switching to
4-ANTENNA
Switching to
2-ANTENNA
Switching to
4-ANTENNA
Switching to
2-ANTENNA