User's Manual

Table Of Contents

Power-saving setting (POWER SAVE)

To conserve power, this setting allows you to change the

transmitter to sleep mode using the wireless remote control

function.

When the transmitter changes to sleep mode, transmission

of the RF audio signal and metadata is stopped. For this

reason, “NO DATA” appears for all items in the TX1/2

menu, except for “SLEEP” in the POWER SAVE

indication.

Setting the audio input level (INPUT

LEVEL)

You can set the input level to the transmitter.

Transmission power setting (RF POWER)

You can change the transmission power of the transmitter.

Always perform pairing after changing the maximum RF

output power setting for a transmitter. If you fail to do so,

configuration of RF output power settings via the wireless

remote control function may become impossible.

For details on pairing, see “Pairing with a transmitter” on

page 18.

+48V power setting (+48V)

Turns the +48V on the transmitter on or off.

This function may not be supported depending on the

transmitter.

Battery level display setting (BATT

REMAIN)

This sets the display method for the transmitter battery

level.

Note