User's Manual
Table Of Contents
- Table of Contents
- Features
- Parts Identification
- Power Supply
- Setting the Transmission Channel
- Using Cross Remote
- Using the Encrypted Transmission Function
- Basic Menu Operations
- Setting Menus
- Attaching With the Soft Case
- Block Diagram
- Troubleshooting
- Important Notes on Operation
- Specifications
- Carrier Frequencies and Channel Steps
15
Rear
Front
Removing the unit from a belt
When the soft case is attached to a belt with the unit’s
antenna pointing up, be careful to avoid getting the soft
case’s hook and loop fastener caught on the belt during
removal.
The hook and loop fastener may open if it gets caught on
the belt.
To avoid contact between the fastener and belt, tilt the
bottom of the soft case outward (Fig. 1) or rotate the case
to the left or right (Fig. 2) during removal.
Hook and loop fastener
Hook and loop
fastener
Fig. 1
Belt
Hook and loop
fastener
Fig. 2
Belt