4-464-386-11 (1) Data Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-EW276/EW246/EW226 VPL-EX276/EX272/EX246/EX242/EX226/EX222 Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer.
Table of Contents Overview Location and Function of Controls .... 4 Main Unit ..................................... 4 Connector Panel ........................... 5 Remote Commander and Control Panel Keys ................................. 6 Preparation Connecting the Projector ................... 9 Connecting a Computer ................ 9 Connecting a Video equipment ... 10 Connecting a microphone .......... 12 Connecting a USB memory device ......................................
Projecting an Image ....................38 Using the Controller ...................38 USB Media Viewer Using USB Media Viewer ................39 Thumbnail Mode ........................40 Option Menu ...............................40 Display Mode .............................41 Option Menu ...............................41 Slideshow Mode .........................41 Option Menu ...............................42 Others Indicators ..........................................43 Messages List ....................
B Overview Location and Function of Controls Main Unit 6 5 4 1 2 qh 3 qg qd qf Caution 7 8 qs qa 7 8 0 9 l Speaker (VPL-EW276/EW246/ EW226/EX276/EX246/EX226 only) a Focus ring (page 15) m Connector panel (page 5) b Zoom ring (page 15) n Security bar c Lens d Remote control detector e ON/STANDBY indicator (page 43) f LAMP/COVER indicator (page 43) g Front feet (adjustable) (page 16) h Foot adjust button (page 16) i Air filter cover/Ventilation holes (intake) (page 49) j Lamp cover (page 47)
Connector Panel VPL-EW276/EW246/EW226/EX276/EX246/EX226 45 1 qa 3 8 q; Overview 4 5 6 qs 7 2 9 VPL-EX272/EX242/EX222 1 45 qa 3 8 q; 6 7 2 9 Input (pages 9, 10) a INPUT A Video: RGB/YPBPR input connector (RGB/YPBPR) Audio: Audio input connector (AUDIO) b INPUT B Video: RGB input connector (RGB) Audio: Audio input connector (AUDIO) c INPUT C Video: HDMI input connector (HDMI) Audio: HDMI input connector (HDMI) d S VIDEO (S VIDEO IN) Video: S video input connector (S VIDEO IN) Audio: Audio input c
h LAN connector (page 31) Notes • This connector outputs the projected image or audio only when INPUT A or INPUT B is used. • The audio output connector is available only on VPL-EW276/EW246/EW226/EX276/ EX246/EX226. i AC IN (∼) socket Connects the supplied AC power cord. j USB connector (Type A) ( (pages 12, 39) ) k USB connector (Type B) ( (page 38) ) Others g RS-232C connector (RS-232C) l Microphone input ( RS-232C compatible control connector.
e Using various functions during projecting Notes *1: Use this key when inputting a computer signal. But it may not be used depending on the resolution of the input signal. *2: Use this key when inputting a computer signal.You cannot use this key when “Type A USB”, “Type B USB” or “Network” is selected as the input. ECO MODE key Energy-saving mode can be set easily. Energy-saving mode consists of “Lamp Mode,” “With No Input,” “With Static Signal” and “Standby Mode.
Others g Infrared transmitter About remote commander operation • Direct the remote commander toward the remote control detector. • The shorter the distance between the remote commander and the projector is, the wider the angle within which the remote commander can control the projector becomes. • Make sure that nothing obstructs the infrared beam between the remote commander and the remote control detector on the projector.
B Preparation Connecting the Projector Notes • Make sure all the equipment is powered off when connecting the projector. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. • For more information, refer also to the instruction manuals of the equipment you are connecting. • Use a no-resistance audio cable.
Notes • Audio output from the HDMI connector is available only on VPL-EW276/EW246/EW226/ EX276/EX246/EX226. • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) • The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal.
VIDEO IN For connecting video equipment with a video output connector. Video cable (not supplied) Video output connector Video equipment Audio output connector Note The audio input connector is available only on VPL-EW276/EW246/EW226/EX276/EX246/ EX226. Preparation Audio cable (Phono plug × 2 – stereo mini plug) (not supplied) INPUT A For connecting video equipment with a YPBPR output connector.
INPUT C For connecting video equipment with an HDMI output connector. HDMI cable (not supplied) HDMI output connector Video equipment Notes • Audio output from the HDMI connector is available only on VPL-EW276/EW246/EW226/ EX276/EX246/EX226. • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.
Connecting a USB wireless LAN module USB connector (Type A) ( ) For connecting a USB wireless LAN module IFU-WLM3 (not supplied) (“Presentation Function via Network” (page 35)). USB wireless LAN module IFU-WLM3 (not supplied) Preparation Notes • Undesignated USB wireless LAN modules do not work. • When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in Standby mode (Standby Mode: “Low”), or the AC power cord is unplugged from the wall outlet.
B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances and projected image sizes, see “Projection Distance” (page 58). 3 5 4 2 Video equipment Projector 1 6 Wall outlet Computer 1 Plug the AC power cord into the wall outlet. 2 Connect all equipment to the projector (page 9).
7 Adjust the focus, size and position of the projected image (page 15).
Adjusting the tilt of the projector with the front feet (adjustable) By changing the tilt of the projector with the foot adjust buttons/front feet (adjustable), you can adjust the position of the projected image. How to adjust the angle 1 Press and hold the foot adjust buttons. 2 Lift up the front of the projector to adjust the angle. 3 Release the foot adjust buttons. 4 Turn the front feet (adjustable) to set the angle of the projector precisely.
Correcting trapezoidal distortion of the projected image (Keystone feature) Normally the Keystone feature automatically adjusts the projected image. The Keystone feature may not work automatically if the screen is tilted. In this case, set Keystone manually. 1 Press the KEYSTONE key on the remote commander or select V Keystone in the Installation menu. 2 Use the V/v/B/b keys to set the value. The higher the value, narrower the top of the projected image. The lower the value, the narrower the bottom.
Turning Off the Power 1 Press the ?/1 key on the unit or the remote commander. The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds again, shutdown is cancelled. 2 Unplug the AC power cord from the wall outlet. To turn off without displaying confirmation message Press and hold the ?/1 key on the unit for a few seconds (page 44). ECO gauge This gauge indicates the current effectiveness of the projector’s ECO function.
B Adjustments and Settings Using a Menu Using a MENU Note The menu displays used for the explanation below may be different depending on the model you are using. 1 Press the MENU key to display the menu. 2 Select the setting menu. Use the V/v key to select the setting operations in step 3 and then press the ENTER key to register the setting. To return to the selection screen of the setting items, press the B or RETURN key.
The Picture Menu The Picture is used to adjust the picture for each input signal. Items Item descriptions Picture Mode Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture. Standard: Provides an image which is natural and well balanced. Presentation*1: Provides a bright image, suitable for presentations. Blackboard: Provides an image suitable for displaying on a blackboard. Game: Provides an image suitable for viewing games. Cinema: Provides an image suitable for viewing movies.
The Screen Menu The Screen menu is used to adjust the size, position and aspect ratio of the projected image for each input signal. Items Item descriptions Changes the aspect ratio of the projected image (page 23). VPL-EW276/EW246/ EW226: When the computer signal is input 4:3: Displays the image to fit the maximum projected image size with an aspect ratio fixed to 4:3. 16:9: Displays the image to fit the maximum projected image size with an aspect ratio fixed to 16:9.
Items Item descriptions Adjust Signal Adjusts the image of computer signal. Use this item if the edge of the image is cut and reception is bad. APA*2 *3 Automatically adjusts the projected image to an optimum quality when you press the ENTER key (page 6). Phase*2 Adjusts the dot phase of the display pixel and the input signal. Set to the value where looks clearest. Pitch*2 The higher the value, the wider the horizontal image elements (pitch).
Aspect Input signal Recommended setting value and projected image 4:3 Full1*1 *2 *3 16:9 Full1*1 *2 *3 16:10 Full1*3 4:3 4:3*4 *5 *1: If you select “Normal,” the image is projected in the same resolution as the input signal without changing the aspect ratio of the original image. *2: If you select “Full2,” the image is projected to fit the projected image size, regardless of the aspect ratio of the image.
VPL-EX276/EX272/EX246/EX242/ EX226/EX222 Input signal Recommended setting value and projected image 4:3 Full1*1 *1: If you select “Normal,” the image is projected in the same resolution as the input signal without changing the aspect ratio of the original image. Video signal Computer signal *2: If you select “4:3,” the image is projected to fit the projected image size, regardless of the aspect ratio of the image.
The Function Menu The Function menu is used for setting various functions of the projector. Items Item descriptions *3 Volume Mic Volume*3 *3 The higher the value, the louder an audio volume and the lower the value, the lower the audio volume. Adjust the volume of the microphone.*2 Speaker On/Off: When set to “On,” speaker outputs sound. To not output sound from the speaker, select “Off.” Smart APA On/Off: When set to “On,” APA functions automatically when a signal is input.
The Operation Menu The Operation menu is used for setting for the operations by using the menu or the remote commander. Items Item descriptions Language Selects the language used in the menu and messages. Status On: All on-screen statuses are enabled. Off: Turns off the on-screen displays, except for menus, warning messages and messages from the message list. Security Lock*1 On/Off: This function enables restriction of the projector to authorized users by password.
The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. Items Item descriptions LAN Settings IP Address Setup*9 Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: To specify the IP Address manually. WLAN Settings*10 WLAN Connection*8 On/Off: Set the wireless output of the USB wireless LAN module (not supplied) to On/Off. Access Point Setup Auto/Manual *11: Set the access point automatically or manually.
Items Item descriptions Direct Power On On/Off: When set to “On,” you can turn the power on without going to Standby mode when the AC power cord is connected to a wall outlet. With the projector turned off, you can also unplug the AC power cord without going to Standby mode, regardless of the Direct Power On setting. Notes *1: This may not be optimum depending on the input signal. In this case set manually according to the connected equipment.
The Installation Menu The Installation menu is used for installing the projector. Items Item descriptions Image Flip HV/H/V/Off: Flips the projected image horizontally or vertically according to the installation method. Installation Attitude Right Side Up/Upside Down/Link to Image Flip: Change the cooling setting to suit to the installation attitude. When set to “Link to Image Flip,” the cooling setting changes based on the setting of “Image Flip.
The Information Menu The Information menu is used to check projector status, such as total usage time of the lamp. Items Item descriptions Model Name Displays the model name. Serial No. Displays the serial number. fH/fV *1 Displays the horizontal/vertical frequency of the current input signal. Signal Type Displays the type of the current input signal. Lamp Timer Indicates the total usage time of a lamp. Note *1: These items may not be displayed depending on the input signal.
B Network Using Network Features Connection to the network allows you to operate the following features: • Checking the current status of the projector via a Web browser. • Remotely controlling the projector via a Web browser. • Receiving the e-mail report via the projector. • Making the network settings for the projector. • Displaying messages on the projected image using an application.
How to operate the Control window Switching the page Click one of the Page Switching buttons to display the desired setting page. Confirming the Information regarding the Projector You can confirm the current settings for the projector on the Information page. Page Switching buttons Setting the access limitation You can limit a user for accessing any particular page.
Mail Report button Using the e-mail report Function Set the e-mail report function on the Setup page. Entered values will not be applied unless you click on [Apply]. 1 2 Click on [Owner information] to enter the owner information recorded in the 3 e-mail report. 4 6 5 Owner information button 2 1 Enter the outgoing e-mail address in the Email Address box then check the Report Timing check box of the e-mail report to be sent. 4 Set the mail account for sending email reports.
SMTP Authentication: Check this check box to arrange for SMTP authentication to be performed before sending e-mail. Account Name: Enter the mail account name. Password: Enter the password. 5 Confirm the contents of the e-mail report. When you click on [View], the contents of the e-mail report are displayed. 6 Send the test mail. Check on the Send test mail check box then click on [Apply] to send your test mail to the e-mail address you set.
B Presentation Function via Network Using Presentation Function via Network The Presentation Function via Network enables you to do the following: • Connect a maximum of 8 computers to the projector. • Project images from a maximum of 4 computers simultaneously. • Connect a USB Wireless LAN Module (not supplied) to the projector allows the projector to connect to a network wirelessly. Presentation Function via Network requires installation of Projector Station for Network Presentation (supplied CD-ROM).
Projecting an Image After starting Projector Station for Network Presentation, the connection setting window appears. 1 Find projectors connected to the network. Click “Search” in the connection setting window to search for projectors. Notes • The appearance of the application on the screen is subject to change without notice. • When a projector is connected to a network via a wireless connection, if the “SSID” is changed from the factory default, it may not be found.
Using the Controller Displaying Images or Files Sent from a Tablet Device You can project JPEG images, PDF files, etc. stored in a tablet device wirelessly by using a specific application.*1 For downloading*2 or detailed method of using the application, access the following URL. http://PWPresenter.pixelworks.com Network Presentation User 000001 8 Items Functions Start projecting an image. Pause projecting an image. Stop projecting an image (screen turns black). Change the application settings.
B Projecting an Image using USB Connection Projecting an Image using USB Connection You can also project an image simply by connecting the projector and computer with a USB AB cable (not supplied). Projecting an image using USB connection requires to start USB Display. System requirements for using the application are as follows.
B USB Media Viewer Using USB Media Viewer You can browse image files stored in a USB memory device inserted in the USB connector of the projector, without using a computer. Supported storage media and file format: • Supported storage media: USB flash memory • Supported format of storage media: FAT format • Supported file format: JPEG (.jpg/.jpeg), Bitmap (.bmp), PNG (.png), GIF (.gif), TIFF (.tif/.tiff) Notes • exFAT, NTFS are not supported. • TIFF files containing EXIF information are not supported.
Thumbnail Mode The image files in the folder are displayed as a thumbnail list. Option menu Press the V/v/B/b key on the remote commander to select an image, then press the ENTER key. The option menu appears in the lower part of the screen. Option Menu You can select the display order of thumbnails and display method of image files. Items Item descriptions Hide the option menu. Switch to the display mode, and display the selected image in full screen view.
Display Mode In display mode, you can view a selected image in full screen view. Option menu Press the ENTER key on the remote commander. The option menu appears in the lower part of the screen. Option Menu Items Item descriptions Hide the option menu. Return to the thumbnail mode (page 40). Rotate the image 90 degrees counter-clockwise. Rotate the image 90 degrees clockwise. Switch to the slideshow mode, and start the slideshow from the selected image. (page 41) Display the previous image.
Option Menu Items Item descriptions Hide the option menu. Return to the thumbnail mode (page 40). Display the previous image. Display the next image. Press the V/v key to change the slideshow time interval. 3 Slideshow time interval 3 After 3 seconds, display the next image. 5 After 5 seconds, display the next image. 10 After 10 seconds, display the next image. Press the V/v key to change the slideshow effect. Slideshow effect The next image appears with tile transition effect.
B Others Indicators The indicators allow checking the status and notify you of abnormal operation of the projector. If the projector exhibits abnormal status, address the problem in accordance with the table below. ON/STANDBY indicator Status Meaning/Remedies Lights in red The projector is in Standby mode. Flashes in green • The projector is ready to operate after having been turned on. • The lamp cools after the projector is turned off. Lights in green The projector’s power is on.
Messages List When any of the messages listed below appears on the projected image, address the problem in accordance with the table below. Messages Meaning/Remedy High temp.! Lamp off in Check the items below. 1 min. • Check if nothing is blocking the ventilation holes. • Check if the air filter is not clogged. • Check if the Installation Attitude in the Installation menu is set correctly.
Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptoms Remedy The power is not turned on. Check if the AC power cord is firmly connected. – When the “Control Key Lock” is set to “On,” you cannot turn on the projector using the ?/1 key on the projector. 26 If the lamp or lamp cover is not attached securely, the projector cannot be turned on. 47 Check if the connecting cable is connected to external equipment firmly.
Symptoms Remedy Page The image is dark/too bright. The settings for “Brightness,” “Contrast,” and “Lamp Mode” affect brightness of the image. Check if the value is appropriate. 20, 27 The image will be dark when the lamp is burnt out. Check “Lamp Timer,” and replace the lamp with a new one if necessary. 30, 47 The image becomes darker or brighter. The image is not clear. “With Static Signal” is set to “On.” 27 During picture muting, the lamp is dimmed to reduce power consumption.
Replacing the Lamp Replace the lamp with a new one if a message displayed on the projected image (page 44). Use an LMP-E212 projector lamp (not supplied) for replacement. Caution • The lamp remains hot after the projector is turned off. If you touch the lamp, you may burn your finger. When you replace the lamp, wait for at least an hour after turning off the projector for the lamp to cool sufficiently.
4 Insert the new lamp all the way in until it is securely in place. Tighten the 2 screws. 6 Connect the AC power cord to a wall outlet and turn on the projector. 7 Reset the lamp timer for notification of the next replacement time. Select “Lamp Timer Reset” on the Function menu then press the ENTER key. When a message appears, select “Yes” to reset the lamp timer (page 25). Caution 5 Close the lamp cover and tighten the 1 screw. Note The power will not turn on if the lamp is not secured properly.
Cleaning the Air Filter When a message appears on the projected image indicating time for a filter cleaning, clean the air filter (pages 43, 44). If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire.
Specifications Items Descriptions Model VPL-EW276/EW246/EW226/EX276/EX272/EX246/EX242/ EX226/EX222 Projection system Display device Projection lens 3 LCD system Effective display size VPL-EW276: 0.75 inch (19.0 mm), 3 plate panels, Aspect ratio 16:10 VPL-EW246/EW226: 0.59 inch (15.0 mm), 3 plate panels, Aspect ratio 16:10 VPL-EX276/EX272/EX246/EX242/EX226/EX222: 0.63 inch (16.
Items Descriptions Model VPL-EW276/EW246/EW226/EX276/EX272/EX246/EX242/ EX226/EX222 INPUT OUTPUT (Computer/video) INPUT A RGB/YPBPR input connector: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/PBPR: 0.
Items Descriptions Model VPL-EW276/EW246/EW226/EX276/EX272/EX246/EX242/ EX226/EX222 Storage temperature/ Storage humidity –20 °C to +60 °C (–4 °F to 140 °F)/10% to 90% (no condensation) Power requirements VPL-EW276/EX276: 100V to 240V AC, 3.1A-1.3A, 50/60Hz VPL-EW246/EX246: 100V to 240V AC, 3.2A-1.3A, 50/60Hz VPL-EW226: 100V to 240V AC, 2.9A-1.2A, 50/60Hz VPL-EX272/EX242: 100V to 240V AC, 2.8A-1.2A, 50/60Hz VPL-EX226: 100V to 240V AC, 3.0A-1.2A, 50/60Hz VPL-EX222: 100V to 240V AC, 2.7A-1.
Descriptions Model VPL-EW276/EW246/EW226/EX276/EX272/EX246/EX242/ EX226/EX222 Heat dissipation VPL-EW276: 100V AC: 1034 BTU/h 240V AC: 1003 BTU/h VPL-EW246: 100V AC: 1061 BTU/h 240V AC: 1020 BTU/h VPL-EW226: 100V AC: 980 BTU/h 240V AC: 945 BTU/h VPL-EX276: 100V AC: 1044 BTU/h 240V AC: 1017 BTU/h VPL-EX272: 100V AC: 942 BTU/h 240V AC: 915 BTU/h VPL-EX246: 100V AC: 1075 BTU/h 240V AC: 1041 BTU/h VPL-EX242: 100V AC: 932 BTU/h 240V AC: 904 BTU/h VPL-EX226: 100V AC: 1000 BTU/h 240V AC: 973 BTU/h VPL-EX222: 1
Items Descriptions Model VPL-EW276/EW246/EW226/EX276/EX272/EX246/EX242/ EX226/EX222 Optional accessories*2 *3 Projector Lamp LMP-E212 (for replacement) USB wireless LAN module IFU-WLM3 Notes *1: For details, refer to “Acceptable Input Signals” on page 57. *2: Information on accessories in this manual is current as of March 2013. *3: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer.
Pin assignment HDMI connector (HDMI, female) 19 1 18 RGB input connector (Mini D-sub 15-pin, female) 2 1 T.M.D.S. Data2+ 11 T.M.D.S. Clock Shield 2 T.M.D.S. Data2 Shield 12 T.M.D.S. Clock – 1 Video input (red) R 9 Power supply input for DDC 3 T.M.D.S. Data2 – 13 N.C. 2 Video input (green) G 10 GND 4 T.M.D.S. Data1+ 14 RESERVED (N.C.) 3 Video input (blue) B 11 GND 5 T.M.D.S.
USB connector (Type A, female) 1 VBUS (4.4 - 5.
Acceptable Input Signals*1 Resolution Computer signal Resolution 640 × 350 fH[kHz]/ fV[Hz] Input connector RGB/ HDMI RGB YPBPR 31.5/70 z z 37.9/85 z z 31.5/70 z z 37.9/85 z 31.5/60 z 35.0/67 1280 × 800 fH[kHz]/ fV[Hz] 49.7/60 Input connector RGB/ HDMI RGB YPBPR z z z Digital TV signal*4 Input connector Signal fV[Hz] RGB/ YPBPR HDMI z 480i 60 z z z 576i 50 z z z z 480p 60 z z 37.9/73 z z 576p 50 z z 37.5/75 z z 1080i 60 z z 43.
Projection Distance The projection distance is the distance between the front of the lens and the surface of the projected image. The following describes the projection distance and height from the center of the lens to edge of screen by each projected screen size. Height H is the height from the bottom of the projected image (top for ceiling mount) to A (determined by drawing a perpendicular line from the center of the lens to projected image surface).
Projection distance table (VPL-EW276) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.72 × 1.08 (68 × 42) 1.92-3.09 (76-121) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.15 × 1.35 (85 × 53) 2.41-3.87 (95-152) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.58 × 1.62 (102 × 64) 2.90-4.66 (114-183) -0.29 (-12) -0.29 (-12) 150 inch (3.
Projection distance table (VPL-EW246) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.72 × 1.08 (68 × 42) 2.43-3.90 (96-153) -0.11 (-4) -0.11 (-4) 100 inch (2.54m) 2.15 × 1.35 (85 × 53) 3.04-4.89 (120-192) -0.13 (-5) -0.13 (-5) 120 inch (3.05m) 2.58 × 1.62 (102 × 64) 3.66-5.88 (144-231) -0.16 (-6) -0.16 (-6) 150 inch (3.
Projection distance table (VPL-EW226) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.72 × 1.08 (68 × 42) 2.35-3.06 (93-120) -0.11 (-4) -0.11 (-4) 100 inch (2.54m) 2.15 × 1.35 (85 × 53) 2.94-3.83 (116-151) -0.13 (-5) -0.13 (-5) 120 inch (3.05m) 2.58 × 1.62 (102 × 64) 3.53-4.61 (139-181) -0.16 (-6) -0.16 (-6) 150 inch (3.
Projection distance table (VPL-EX276/EX272/EX246) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.63 × 1.22 (64 × 48) 2.29-3.68 (90-145) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.03 × 1.52 (80 × 60) 2.87-4.61 (113-181) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.44 × 1.83 (96 × 72) 3.45-5.54 (136-218) -0.30 (-12) -0.
Projection distance table (VPL-EX242/EX226) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.63 × 1.22 (64 × 48) 2.24-2.92 (89-115) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.03 × 1.52 (80 × 60) 2.81-3.66 (111-144) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.44 × 1.83 (96 × 72) 3.38-4.40 (133-173) -0.30 (-12) -0.
Projection distance table (VPL-EX222) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.63 × 1.22 (64 × 48) 2.41-2.88 (95-113) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.03 × 1.52 (80 × 60) 3.02-3.60 (119-142) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.44 × 1.83 (96 × 72) 3.63-4.33 (143-170) -0.30 (-12) -0.30 (-12) 150 inch (3.
Ceiling Installation Caution Never mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). Height H from center of lens to edge of screen Center of lens A Top side Projected image Projection distance L * The number will be minus when the top of the projected image is higher than A.
Projection distance table (VPL-EW276) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.72 × 1.08 (68 × 42) 1.92-3.09 (76-121) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.15 × 1.35 (85 × 53) 2.41-3.87 (95-152) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.58 × 1.62 (102 × 64) 2.90-4.66 (114-183) -0.29 (-12) -0.29 (-12) 150 inch (3.
Projection distance table (VPL-EW246) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.72 × 1.08 (68 × 42) 2.43-3.90 (96-153) -0.11 (-4) -0.11 (-4) 100 inch (2.54m) 2.15 × 1.35 (85 × 53) 3.04-4.89 (120-192) -0.13 (-5) -0.13 (-5) 120 inch (3.05m) 2.58 × 1.62 (102 × 64) 3.66-5.88 (144-231) -0.16 (-6) -0.16 (-6) 150 inch (3.
Projection distance table (VPL-EW226) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.72 × 1.08 (68 × 42) 2.35-3.06 (93-120) -0.11 (-4) -0.11 (-4) 100 inch (2.54m) 2.15 × 1.35 (85 × 53) 2.94-3.83 (116-151) -0.13 (-5) -0.13 (-5) 120 inch (3.05m) 2.58 × 1.62 (102 × 64) 3.53-4.61 (139-181) -0.16 (-6) -0.16 (-6) 150 inch (3.
Projection distance table (VPL-EX276/EX272/EX246) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.63 × 1.22 (64 × 48) 2.29-3.68 (90-145) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.03 × 1.52 (80 × 60) 2.87-4.61 (113-181) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.44 × 1.83 (96 × 72) 3.45-5.54 (136-218) -0.30 (-12) -0.
Projection distance table (VPL-EX242/EX226) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.63 × 1.22 (64 × 48) 2.24-2.92 (89-115) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.03 × 1.52 (80 × 60) 2.81-3.66 (111-144) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.44 × 1.83 (96 × 72) 3.38-4.40 (133-173) -0.30 (-12) -0.
Projection distance table (VPL-EX222) Unit: m (inches) Projected image size Projection Distance L Height H from center of lens to edge of screen Minimum Projection Maximum Projection Distance L Distance L Diagonal D Width × Height 80 inch (2.03m) 1.63 × 1.22 (64 × 48) 2.41-2.88 (95-113) -0.20 (-8) -0.20 (-8) 100 inch (2.54m) 2.03 × 1.52 (80 × 60) 3.02-3.60 (119-142) -0.25 (-10) -0.25 (-10) 120 inch (3.05m) 2.44 × 1.83 (96 × 72) 3.63-4.33 (143-170) -0.30 (-12) -0.30 (-12) 150 inch (3.
Dimensions Top (VPL-EW276) 365 (14 3/8) 6.
Top (VPL-EW246/EX276/EX272/EX246) 365 (14 3/8) 10.4 (13/32) Center of Lens 252 (9 29/32) 18.1 (23/32) 85 (3 11/32) Unit: mm (inches) Top (VPL-EW226/EX242/EX226) 85 (3 11/32) Center of Lens 252 (9 29/32) 15 24.2 ( /16) 0.5 (1/32) 24.
Top (VPL-EX222) 365 (14 3/8) Center of Lens 252 (9 29/32) 20.5 ( 13/16) 0.5 (1/32) 21 (13/16) 85 (3 11/32) Unit: mm (inches) 105.3 (4 5/32) 96.2 (3 25/32) Center of Lens 44.
207 (8 228 (8 31/32) 14 (9/16) 102.5 (4 1/32) 0.8 (1/32) Center of Lens 27.5 (1 3/32) 14 ( 23/32) 5/32) 221.6 (8 9/16) 38.5 (1 17/32) 233.5 (9 3/16) 13.5 (17/32) 27.5 (1 3/32) 46.3 (1 13/16) Bottom (VPL-EW276) 31.8 31.8 (1 1/4) (1 1/4) 45.3 (1 25/32) 57.4 (2 1/4) 97.
38.5 (1 17/32) 14 (9/16) 207 (8 13.5 (17/32) 31.8 31.8 (1 1/4) (1 1/4) 45.3 (1 25/32) 57.4 (2 1/4) 97.5 (3 27/32) Unit: mm (inches) 76 Dimensions 228 (8 31/32) 0.8 (1/32) Center of Lens 102.5 (4 1/32) 14 (9/16) 5/32) 221.6 (8 23/32) 27.5 (1 3/32) 27.5 (1 3/32) 46.3 (1 13/16) Bottom (VPL-EW246/EX276/EX272/EX246) 233.
38.5 (1 17/32) 14 (9/16) 228 (8 31/32) 0.8 (1/32) Center of Lens 27.5 (1 3/32) 14 (9/16) 207 (8 5/32) 221.6 (8 23/32) 102.5 (4 1/32) 233.5 (9 3/16) 13.5 (17/32) 27.5 (1 3/32) 46.3 (1 13/16) Bottom (VPL-EW226/EX242/EX226/EX222) 31.8 31.8 (1 1/4) (1 1/4) 45.3 (1 25/32) 57.4 (2 1/4) 97.
Index A AC IN ........................................................ 6 Acceptable input signal ........................... 57 Adjust Signal ........................................... 22 Air filter ................................................... 49 Air filter cover/Ventilation holes (intake) ............................................... 4 APA ........................................................... 6 Aspect ........................................... 6, 21, 23 H H (Horizontal) ..................
R About Trademarks Remote commander ...................................6 Remote control detector ............................4 Replacing the lamp ..................................47 Reset ........................................................20 RS-232C ....................................................6 • Adobe and Adobe Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Sony Corporation
