Color TV Service Manual

7
8
First Time Operation
MENU
Your TV is now ready for use
5
A new menu appears on the screen asking you to check
that the aerial is connected. Ensure the aerial is connected and then press the OK button to start the automatic
tuning.
The TV starts to automatically search and store all
available channels (TV Broadcast) for you.
This procedure could take some minutes. Please be
patient and do not press any button. Otherwise the automatic tuning will not be completed.
6
After all available channels are captioned and stored,
the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.
a)
If you do not wish to change the channel order, go to
step 7.
b)
If you wish to change the channel order: 1 Press the or button to select the programme
number with the channel (TV Broadcast) you wish
to rearrange, then press the button.
2 Press the or button to select the new
programme number position for your selected
channel (TV Broadcast), then press .
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
7
Press the MENU button to remove the menu from the
screen.
MENU
Please confirm that
aerial is connected
Confirm
OK
Programme: 01
System: B/G
Channel: C21
Auto Tuning
Searching...
Programme Sorting
Select channel: Exit:
MENU
Programme: 01 TVE 02 TVE2 03 TV3 04 C33 05 C27 06 C58
OK
Programme Sorting
Select new position: Exit:
MENU
Programme: 01 TVE 02 TVE2 03 TV3 04 C33 05 C27 06 C58 05 C27
OK
K
K
K
7
GB
Language
Select Language:
English Español Français Italiano Magyar Nederlands
OK
Country
Select country:
- Бългapия Česká rep.
Magyarország Polska România
OK
Do you want to start
automatic tuning?
Yes
No
OK
K
K
K
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change or repeat the tuning (e.g. when you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in the (Set Up). For more information, refer to the “Menu Guide” section of this instruction manual. You can also do that by pressing the Auto Start Up Button
on the TV set.
First Time Operation
continued...
1
Connect the TV plug to the mains socket (220-240V AC,
50Hz)
Press the on/off button on the TV set to turn on the TV. The first time you press this button, a
Language menu
displays automatically on the TV screen.
2
Press the or button on the remote control to select
the language, then press the
OK
button to confirm your
selection. From now on all the menus will appear in the selected language.
3
The
Country
menu appears automatically on the TV
screen. Press the or button to select the country in which you will operate the TV set, then press the
OK
button to confirm your selection.
Select “-“ instead of a country • If the country in which you want to use the TV set
does not appear in the list.
• If you do not want your channels (TV Broadcast)
stored in a given channel sequence starting from programme position 1.
4
The
Auto Tuning
menu appears on the screen. Press the
OK
button to select
Yes
.
The operating instructions mentioned here are partial abstracts from the ‘Operating Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain as in the manual.
SECTION 1 GENERAL