Colour Television Instruction Manual

24
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark)
and no sound.
Poor or no picture (screen is
dark), but good sound.
No picture or no menu
information from equipment
connected to the Scart
connector.
Good picture, no sound.
No colour on colour
programmes.
When you switch on the TV
does not appear the last
channel you were watching
before switching the TV off.
Distorted picture when
changing programmes or
selecting teletext.
Wrong characters appear
when viewing teletext.
Wrong characters appear
when viewing NexTView.
Solution
Check the aerial connection.
• Plug the TV in and press the button on the front of the TV.
If the standby indicator is on, press TV button on the
remote control.
Using the menu system, select the “Picture Adjustment”
menu and select “Reset” to return to the factory settings (see
page 9).
Check that the optional equipment is on and press the
button repeatedly on the remote control until the correct
input symbol is displayed on the screen (see page 21).
Press the + button on the remote control.
Check that “TV Speakers” is “On” in the “Sound Adjustment”
menu (see page 10).
Check that headphones are not connected.
Using the menu system, select the “Picture Adjustment”
menu and select “Reset” to return to factory settings (see
page 9).
• This is not a malfunction. Press the number buttons on the
remote control to select the desired channel.
• Turn off any equipment connected to the Scart connector on
the rear of the TV.
• Using the menu system, enter to the “Language/Country”
menu and select the country in which you operate the TV set.
For cyrillic languages, we recommend selecting Russia
country if your own country does not appear in the list.
• Using the menu system enter to “Language/Country” menu
(see page 13) and select the same language as the NexTView
is broadcasted.
continued...
Additional Information
03GBKV28/32FQ70B.fm Page 24 Wednesday, January 15, 2003 4:32 PM