User manual

The desired access point is not displayed:
Select [Manual setting], then enter the SSID name of the access point, and then select the
security mode.
3. Enter the password, and then select [Next] - [Register].
Access points without the icon do not require a password to be entered.
Other setting items
Depending on the status or the setting method of your access point, there may be more setting
items.
WPS PIN:
Displays the PIN to enter to the connected device.
IP address setting:
Select [Auto] or [Manual].
IP address:
If you are entering the IP address manually, enter the fixed address.
Subnet mask/Default gateway:
When you set [IP address setting] to [Manual], enter the IP address and subnet mask to match
your network environment.
Priority Connection:
Select [On] or [Off].
Note
To give the registered access point priority, set [Priority Connection] to [On].
Hint
For input method, see “How to use the keyboard.”
[151] How to Use
Menu operations Setup
Edit Device Name