SXRD Projection TV Operating Instructions

KDS-50A2000/KDS-55A2000/KDS-60A2000

2-686-615-13(1)

F:\Worker\SONY SXRD-A EN 13(1)\2686615131\030BAS.fm

masterpage:3 columns Right

Basic Operations

Using the Remote Control

Button Description

1 TV/VIDEO Press repeatedly to cycle through the video inputs.

✍ See page 45 for information on setting up the video

input labels, including the Skip function.

2 SLEEP Press repeatedly until the TV displays the time in minutes (Off,

15, 30, 45, 60, 90 or 120) that you want the TV to remain on

before shutting off. To cancel Sleep, press SLEEP repeatedly

until Off appears.

3 FUNCTION

Buttons

The FUNCTION button indicator lights up momentarily when

pressed to show which external equipment the remote control

is operating. When the remote control is set to operate the

external equipment, these buttons will operate the equipment

you choose. You must first press one of these FUNCTION

buttons to operate the corresponding equipment. See page 26

for programming the remote control.

4 0 - 9, ENT Press 0-9 to select a channel; the channel changes after two

seconds. Press ENT to change channels immediately.

5 Use with the 0-9 and ENT buttons to select digital channels.

For example, to enter 2.1, press , , and ENT.

6 JUMP Press to jump back and forth between two channels. The TV

alternates between the current channel and the last channel that

was selected.

7 ANT Press to change between the VHF/UHF input and the CABLE

input.

8 SURROUND Press to select TruSurround XT audio effect or Off to turn this

feature off.

9 SOUND Press to cycle through different sound settings: Dynamic for

enhanced treble and bass, Standard for spoken dialog and

Custom for flat setting.

2 1

✍ The 5 button, CH + button and PLAY button have a tactile dot. Use the tactile dot as a reference when

operating the TV.

✍ Insert two size AA (R6) batteries (supplied) by matching the e

and

E on the batteries to the diagram inside the remote control’s

battery compartment.