SXRD Projection TV Operating Instructions

Other Information
52
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\050SPC.fm
masterpage:3 columns Right
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
3 Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
4 Remove the outside lamp cover.
Release the two clamps as shown in the illustration below.
5 Remove the lamp door.
Turn the screw counterclockwise and slide the lever to the left. Remove
the door.
6 Pull out the lamp.
Hold the indented grooves on the top corners of the lamp, as shown in
the illustration, and pull the lamp straight out. If the lamp is hard to
remove, pull the right side of the lamp for additional traction.
✍ Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
✍ Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
Hold this part of the lamp