LCD Colour TV Operating Instructions

Connecting the Aerial and VCR

• Connecting cables are not supplied.

• For more details of VCR connections as well as other connections, please refer to page 24.

The Scart lead is optional. If you use this optional connection it can improve picture and sound quality when

using a VCR.

If you do not use a Scart lead, you will need to manually tune the VCR to a spare channel once the autotune

procedure has been completed. Refer to “Manual Programme Preset” on page 20. Also refer to your VCR

instruction manual to find out how to find the output channel of your VCR.

Stabilizing the TV set

Overview & Installation

After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.

1 Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.

2 Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.

Do not block or cover this ventilation opening. For

ventilation, leave a space of at least 10 cm from the

wall.

OUT IN

VCR