Manual

• To be able to use the Bluetnnth function, the
Bluetnoth device to be connected must support
the same profile as this system. Even if the
device supports the same profile, the lhnctions
may diffi_r depending on the specifications of
the Blueu_oth device.
• The audio playback on this system may be
delayed from that on the Bluetnoth device
because of the characteristics of the Bluetnnth
wireless technology.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be performed
again.
1 Place the Bluetooth device
within 1 meter (3.3 feet) from the
unit.
2 Press BLUETOOTH.
You can also select 0 [Bluetooth
AUDIO] from '_3 [Input] in home
menl.1.
3 Set the Bluetooth device in
pairing mode.
For details on setting the Blur'tooth
device in pairing mode, refer to the
operating instructions supplied with
the device.
4 Select"BkU-RAY HOME
THEATRE SYSTEM" on the
Bluetooth device display.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
If passkey is required on the Bluetnoth
device, enter "0000". Passkey may be called
"Passcode', "PIN code", "PIN number" or
"Password".
5
Once pairing is completed, the
device is automatically
connected to the system.
Device name appears on the TV
screen.
6
7
You can pair up to 9 Bluetnnth devices. If
the 10th Bluetnoth device is paired, the least
recently connected device will be replaced
by the new one.
Start playback on the Bluetooth
device.
Adjust the volume.
Adjust the volume of the Blu('tooth
device first, if the volume level is still
too low', adjust the volume level on the
unit.
To cancel pairing operation
PressHOME or FUNCTION.
You can connect to a Bluetooth device
from this unit.
Check the following before playing music:
- The Bluetooth function of the Bluetooth
device is turned on.
- The pairing has been completed
(page 29).
1 Press BLUETOOTH.
2
To connect to the most recellt connected
Bluetonth device, press _. Then proceed to
Step 5.
Press OPTIONS.
"13
,<
o-
O
29us