Manual

Two-dimensional code* for
direct access
r Use a two-dimensional code reader app.
11,' ['rli_
,' ['rll_
The app may not be available in some
countries/regions.
Start the "NFC Easy Connect"
app on the smartphone.
Make sure that the application screen
is displayed.
3 Hold the smartphone near to the
on the unit until the
smartphone vibrates.
k_
Vibration cue is provided when the
smartphone is recognized by the unit.
After being recognized by the unit,
follow' the on-screen instructions
displayed on the smartphone, and
complete the procedure for Bin€tooth
couuectiou.
When the Bluetooth connection is
established, the blue LED indicator on
the front panel stops flashing. The
playback time appears in the front
panel display.
• The system only can recognizes and connects to
one NFC-compatible device at a time.
• Depending on your smartphone, you may need
to turn on the NFC function on your smartphone
in advance. For details, refer to the operating
instructions of the smartphone.
If pairing and the Blut, toodl connection lhil, do
the follnwing.
Relaunch "NFC Easy Connect" and move the
smartphnne slowly t_ver the _._.
Remove the case frnm the smartphone if using
a commercially available smartphone case.
To listen to music
Start playback of an audio source ou the
smartphone. For details on playback
operations, refer to the operating
instructions of your smartphoue.
If the volume level is low, adjust Ihe volume ol
lhe smartphone lirst, lllhe vohune level is still
l(}oln'_¥r,adjust the volmne level on the unit.
To stop playback
The playback will be stopped when you
perform any of the following items:
- Hold the smartphoue near to the _ on
the unit again.
- Stop the music player of the smartphoue.
- Turn off the unit or the smartphoue.
- Change the function.
- Disable the Bluetooth function on the
smartphoue.
"13
o"
O
31us