Manual

7 Press RETURN,
The system returns to the previous
display.
8 Press t/,!, to select [Test Tone], then
press Q),
9 Press t/,!, to select [off], then press
Q,
The lesl tnne signals are nnl nutpul lrnm lhe
HDMI (OUT) jack.
To adjusl the volume nl all the speakers at one
time, press VOL +/ .
Usingthe Sleep Timer
You call set the system to turn off at a
preset time, so you call fall asleep listening
to music. The time call be preset ill intervals
of 10 minutes.
Press SLEEP.
Each time you press SLEEP, the minutes
display (the remaining time) in the front
panel display changes by 10 minutes.
When you set the sleep timer, the
remaining time appears every 5 minutes.
When the remaining time is less than
2 minutes, "SLEEP" flashes in the front
panel display.
To check the remaining
time
Press SLEEP once.
To change the remaining
time
Press SLEEP repeatedly.
Deactivating the
Buttons onthe Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for I/Q)) for preventing
misoperation, such as child mischief.
Hold down • on the unit for more
than 5 seconds.
"LOCKED" appears in the front panel
display.
The child lock function is activated and the
buttons on the unit are locked. (You can
operate the system by using the remote
control.)
To cancel, hold down • for more than
5 seconds until "UNLOCK" appears in the
front panel display.
II you operate the bunons nn the unit while the
child lock Amclinn is on, "LOCKED" flashes in
the from panel display.
ControllingYour TV
with the Supplied
Remote Control
By adjusting the remote control signal, you
can control your TV with the supplied
remote control.
When you replace the batteries of the remote
control, the code nmnber may reset to the default
(SONY) setting. Set the appropriate code number
again.
42us