ON&r_ 4-178-243-11(1) The software of this system may be updated in the future, To find out details on any available updates, please visit: http://www,sony,com/bluraysupport/ Blu-ray Disc/DVD Home Theatre System _..l_:::Jm| B3"_IvE_ v,o,o J SU/'_._ CI) IDIGITAL AUDIO TF_LJ _ Master Audio I Operating Java Instructions POWERED BDV-E870/ E570 / E470 / E370 / T57 / T37 http://www.sony.
literature accompanying appliance. LUOKAN Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of' fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
Consult the dealer or an experienced radio/TV technician %r help. CAUTION You am cautioned that any changes or modifications specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution Only use Wireless LAN indoors when using it with IEEE 802.1 la (5 GHz). when moving High power radars the cart/ apparatus combination injury from tip-over. to avoid not expressly approved in this manual could void your authority to operate this equipment.
other U.S. and worldwide Declaration of Conformity Trade Name: SONY Model: UWA-BR100 Address: 16530 Via Esprillo, San Diego, Telephone 2230 CA 92127 Number: U.S.A. are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved. 858-942- • This system incorporates HighDefinition Multimedia Interface This device complies with part 15 of the FCC rules.
surround back amplifier, or S-AIR receiver is used. About These Operating Instructions • The instructions in these Operating Instructions describe the controls on the remote. Yon can also use the controls on the unit if they have the same or similar names as those on the remote. • In this manual, "disc" is used as a general reference for BDs, DVDs, Super Audio CDs, or CDs unless otherwise specified by the text or illustrations.
Table of Contents About These Operating Instructions ....... 5 Unpacking ............................................... Index to Parts and Control .................... Getting 7 10 Started Step 1: Installing the System ....... 15 Step 2: Connecting the System ,,,22 Step 3: Performing the Easy Setup ........................................ 28 Step 4: Selecting the Source ....... 29 Step 5: Enjoying Surround Sound ....................................... 30 Playback Playing from a USB Device .......
Unpacking BDV.
BDV.E570/BDV-E470/BDV-T57 • Operating Instructions • Quick Setup Guide • End user license agreement • Easy Setup Disc (DVD) • Front speakers (2) • FM wire antenna (aerial) (1) • Surround speakers (2) • Speaker cords (6, white/red/ blue/graylgreenlpurple) • USB Wireless LAN Adapter (UWA BR 100) • Video cord (1) • UWABR100 External cable For BDV-E570/BDV-T57 • Center speaker (1) • Remote commander (remote) (1) • Subwoofer (1) oooo00 _oooo o ooooo [ o oo 0 o0o_ooOOO o _ c:::l _.
BDV.E370/BDV-T37 • Speaker cords (5, white/red/ blue/gray/green) • Front speakers (2) • Operating Instructions • Quick Setup Guide • End user license agreement For U.S.
Index to Parts and Control For more information, refer to the pages indicated in parentheses. ½½ il! [] / I/_ (on/standby) [] [] (USB) port (page 33) Play operation buttons [] Front panel display _--(open/close) [] [] (remote sensor) [] Power indicator (page 32) Opens or closes the disc tray. Plays a slideshow (resume play). when a disc containing JPEG image files is inserted. • (stop) Stops playback and remembers the stop point (resume point).
About the indications in the front panel display [] Displays the current sound format. [] [] Lights upwhen outputting 1920 x 1080p/24 Hz video signals. Flashes when the sleep timer is set. (page 52) [] [] Lights up when outputting 720p/1080i/ 1080p video signals from the HDMI OUT jack or 720p/1080i video signals from the COMPONENT VIDEO OUT S-AIR indicator (only when the wireless transmitter (not supplied) is inserted into the unit) Lights up during wireless transmission.
[] [] *_ [] LAN (100) terminal (page 27) (USB) port (page 33) [] COMPONENT 23) [] VIDEO OUT jack (page 23) [] HDMI OUT jack (page 23) [] EZW-T100 [] AUDIO (AUDIO IN L/R) jacks (page 25) [] A.
[] Number buttons (pages 41, 52) Enters the title/chapter fiequencies, etc. numbers, radio AUDIO (pages 37, 38) Selects the audio format/track. SUBTITLE (page 56) Selects the subtitle language when multilingual subtitles are recorded on a BDROM/DVD VIDEO. D.TUNING (page 40) Selects [] TOP MENU POP UP, MENL the radio fiequencies.
[] Playback operation See "Playback" buttons [] (page 32). Displays the playback TV screen. I<
Step 1: Installing the System For the best possible surround sound, place all speakers at the same distance (I_). The distance can be between 0 to 23 feet (0.0 to 7.0 meters). If you cannot place the center speaker and surround speakers at the same distance within 23 feet (7.0 meters) of the listening position. Place the surround speakers to the rear of the listening position The subwoofer can be placed anywhere as (I_), place them (Q). in the room.
To add the optional surround back speakers You can enjoy 7.1 surround sound by purchasing the Wireless Surround optional). The optional )roduct lineup differs depending on the area. For the position of the surround Front left speaker (L) back speakers, refer the illustration Subwoofer Center speaker .--"_ '_ Speaker Kit (WAHT-SBP2, below (@). .........
To disassemble (Front speakers 1 Disconnect the speaker of BDV-E870 only) the speaker cords from the speaker. Rear of the speaker 2 Remove the screw (pre-installed) This screw is used when reassembling Screw at the rear of the speaker. the speaker. Be sure not to lose the screw. J Rear of the speaker 3 Disassemble the speaker by lifting the upper part of the speaker.
4 Pull out the speaker cord from the bottom of the lower part of the speaker. The removed speaker cord is used when installing the speaker on a wall. Lower part of the speaker Speaker cord 5 Remove the protection paper from the speaker-bottom cover, then attach the speakerbottom cover to the bottom of the upper part of the speaker.
To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to (_, and the speaker cord without the color tube to G.
2 Fasten the screws to the wall.
Hang the speakers on the screws. Hole on the back of the speaker __i_i_ii_ii_!iii_i_iiiiii!!!!!_iiiiiiiiiiii!!!!_iiiiii_iiii!!!!!_iiiiiiiiii!!!!!_iiiiiiiiii!!!!!_iiiiiiiiii .........
Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are lilade. • When you connect another component level where sound is not distorted. The connector with a volume control, turn down the volume of the speaker cords and the color tube are color-coded of the other components depending to a on the type of speaker.
This connection sends a video signal to the TV. Depending on the jacks on your TV, select the connection method. Rear panel of the unit O Component video cable (not supplied) t_ Video cord (supplied) To the component video input jacks of the TV. * The HDMI Method cable is supplied 1: HDMI with BDV-E370 cable (O) To the video input jack of the TV. (Latin American models), To the HDMI IN jack of the TV. BDV-T57, and BDV-T37 only.
This connection sends an audio signal to the unit flom the TV. To listen to TV sound via the system, perform this connection. Rear panel of the unit Digital optical cord (not supplied) To the digital optical out jack of the TV. With a digital audio connection, the system receives you can enjoy multiplex broadcast sound.
When you connect the system and other components to the TV, video signals from the system and the components are sent to the TV, and audio signals flom the components are sent to the system as follows. TV Signal flow ] You can enjoy connected _ components • VCR or digital satellite receiver, • VCR, digital _ via the system's etc. (not supplied), satellite receiver, PlayStation, : Audio Video signal speakers. which has a digital coaxial output jack: 0 or portable audio source, etc.
To connect _S__j the antenna (aerial) _ Rear panel of the unit FM wire antenna (aerial) (supplied) m • Be sure to fully extend the FM wire antenna • After connecting the FM wire antenna (aerial). (aerial), • If you have poor FM reception, use a 75-ohm antenna (aerial) as shown below. Outdoor FM antenna (aerial) 26us kee l) it as horizontal as possible. coaxial cable (not supplied) _.
Wireless LAN Adapter and the wireless closer to each other. Wired To set Setup Use a LAN cable to connect to the LAN (100) terminal on the unit. the network LAN router settings For details, see [Network Settingsl (page 59) and follow the on-screen instructions to complete the setup.
2 Step3: Performingthe EasySetup Before performing Make sure all connections connect Connect the calibration mic to the A.CAL MIC ack on the rear panel. Set up the calibration lilic fit ear level using a tripod, etc. (not supplied). The t]'ont of each speaker should face the calibration mic, and there should be no obstruction Step3 between mic. are secure, and then the AC power cord (mains lead).
5 Perform the [Easy Setup]. Follow the on-screen instructions to make the basic settings using (--/,1,/4,/-),and @. For details about [Auto Calibrationl settings in [Easy Setupl, see "Calibrating the Appropriate (page 49). Automatically" To recall the 1 Press HOME. Settings Easy Setup Step4: Selectingthe Source You can select the playback source. Display The home menn appears on the TV screen. 2 Press (--1-)to select _ [Setup].
Step 5: EnjoyingSurroundSound Ariel performing the previous Steps and starting playback, you can easily enjoy surround sound. You can also select pre-programmed surround settings that are tailored to different kinds of sound sources. They bring the exciting and powerful sound of movie theaters into your home. SYSTEM MENU •1"/4-/÷, @ __ i ii!i 1 Press SYSTEM MENU. 2 Press ,I,14,repeatedly until "SUR.SETTING" i! appears in the front panel display, then press @ or->.
Sound from Surround "A.F.D. Effect setting MULTI" • 2 channel source: The system simulates surround sound from 2 channel sources and outputs sound from the 5.1 channel speakers by duplicating 2 channel source sound (AUTO FORMAT DIRECT MULTI) across each speaker. • Multi-channel speakers source. • 2 channel source: The system depending outputs sound from the on the number of channels source: The system simulates from 2 channel sources channel speakers.
Delete unnecessary data in internal memory USB memory. Select [Erase BD Datal in [Videol to delete unnecessary data. If you use USB memory as local storage, all saved data in the [BUDA/BUDB1 folder is deleted. Playing a Disc For playable (page 69). 1 discs, see "Playable Discs" Switch the input selector on your TV so that the signal from the system appears on your TV screen. 2 You can check the playback by pressing DISPLAY. Press _--,and place a disc on the disc tray. information, etc.
Playingfroma USB Device You can play video/music/photo connected USB device. You can enjoy the sound and charge the battery of an iPod via the system. files on the "u Compatible For playable types of files, see "Playable of Files" (page 70). 1 Enjoyingan iPod Types Connect the USB device to the -_ iPod models The compatible iPod models are as follows. Update your iPod with the latest software before _- using with the system. (USB) port on the unit.
To operate remote the iPod using the Playing via a Network You can operate the iPod using the buttons the remote. The following table shows an example on of buttons that can be used. Press Operation D,'-, II Same operation of the iPod. • Pause. or _ Fast reverse or _ as the D,'-/II button variety of on-demand your unit. or forward. Same operation as the _ buttons of the iPod.
H Available Options Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation. Common [Video] only Items Details [Vide() Settings] • [Picture noise appearing picture. Details IPhtyback History List] Displays titles/tracks Searches for related information based on keywords from Gracenote BDV-E870). Contentsl Starts or pauses [Top Menu] Displays [Menu/Popup Menu] [Favorites starts playback beginning.
(A/V S YNC) When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. 1 Press SYSTEM MENU. 2 Press I%1, repeatedly until "A/V SYNC" appears in the front panel display, then press @ or->. 3 Press ,I,14,to adjust the delay between the picture and sound. You can adjust from 0 ms to 300 ms in 25 ms 4 increments. Press @. The settiug is made. 5 Press SYSTEM MENU.
• When changing the sound mode while using the S-AIR receiver, sound from the S-AIR receiver may skip. • When you play a Super Audio CD, this function does Selecting the Effect to Suit the Source You can select a suitable sound mode for movies or music. l]Ot work. Selecting the Audio Format, Multilingual Tracks, or Channel car) o €,. O.. l=, & €,. When the system is playing a BD/DVD VIDE() or DATA CD/DATA DVD (DivX video files*) recorded _ b @ SOUND MODE in multiple audio formats (PCM, 3 =_.
displayed two or more times, the BD/DVD VIDEO is recorded in multiple audio formats. • DVD-VR The types of sound tracks recorded displayed. Example: on a disc are • [ b Stereo] • • • • • [.b Stereo (Audiol)] [ b Stereo (Audio2)] [ab Main] [ b Subl [ J>Main/Sub] • [,b Slereo (Audiol)1 i i ::? and [.b Stere() (Audio2)] do not appear when only one audio stream is recorded disc. on the • DATA CD (DivX video file)/DATA DVD (DivX video file) (Except for U.S.
2 Press I"/4, repeatedly until "NIGHT MODE" appears in the front panel display, then press @ or ->. Press t"/4, to select a setting. 4 • "NIGHT ON": On. • "NIGHT OFF": Oft: Press SYSTEM MENU. The system menu turns off. o t- m Q. • When sound is output from the center speaker, this effect is more pronounced, as speech (movie dialog, etc.) is easy to hear. When sound is not output from the center speaker, the system optimally adjusts the volume.
0 Adjust the volume by pressing VOL +/-. If an FM program is noisy Listening to the Radio It" an FM program is noisy, you can select monaural reception. There will be no stereo You cau eujoy radio souud with the system's speakers. effect, but reception will improve. 1 Press SYSTEM MENU. 2 Press ,1,14,repeatedly until "FM MODE" appears in the front panel display. ......_'_t_ _F 2!_' SYSTEM MENU N Um ber buttons :: TUNED ! ST D.TUNING 3 4 Press @ or-). Press '1"14, to select "MONO.
5 Press ,1%1,to select the preset number you want. ;i iiii:i_ ii_ii ;:i !i TUNED ST %..!.._ o 'o When you know the frequencies, you can select radio stations by inputting the frequencies • You can select the preset number directly by pressing the number buttons. 6 appears in the front panel display, and the station is stored. 8 1 Press @. "COMPLETE" 7 directly. Repeat Steps 2 to 6 to store other stations. "TUNER FM" appears in the front panel display. 2 3 4 Press SYSTEM MENU.
• When you insert the wireless transmitter/transceiver, make sure that the AC power cord (mains lead) is not Usingan S-AIR Product When you purchase the S-AIR product, you need to pert_nn the following settings to activate wireless transmission. About S-AIR products connected to a wall outlet (mains). • Do not touch the terminals of the wireless To insert the wireless into the unit 1 Remove z_ There are two types of S-AIR product. transmitter/ transceiver.
O Make sure to use the same screws to secure the wireless transmitter. 3 4 Press ÷/'-) to select _ [Setup]. Press ,P/I, to select [System Settings], then press @. Rear of the unit 5 L Press ,P/I, to select [S-AIR Settings], then press @. The [S-AIR Settingsl display appears. 6 Press '1"/4,to select [ID], then press @. 7 Press '1"14,to select the desired ID. You can select any ID (A, B, or C). 8 PressG. The setting is made. Set the S-AIR sub unit to the same ID.
For the S-AIR receiver For the S-AIR receiver You can enjoy the system's sound in another room by using the S-AIR receiver. 1 You can enjoy the S-AIR receiver while the unit Press HOME. is in standby mode by setting [Standbyl The home menu appears on the TV screen. 2 3 4 Press <--/->to select w_ 5 Press '1"/4,to select [S-AIR Settings], then press @. 2 3 4 display appears. Press t"/4, to select [Mode], then press ®. 6 Press ,I,14,to select the desired setting.
8 Start pairing of the S-AIR sub unit. • For the surround amplifier Refer to the operating surround amplifier. instructions of the • For the S-AIR receiver For the surround amplifier Refer to the operating S-AIR receiver. For the S-AIR receiver When using S-AIR products, neighbors may also receive your system's sound if IDs are the 9 instructions of the Press <--/->to select [Start], then press ®. same, or you may receive sound fiom neighbors.
4 Press ,1%1,to select [S-AIR Settings], then press @. The [S-AIR Settings] 5 6 display appears. Press ,I,/4, to select [RF Change], then press @. Press ,I,/4, to select the desired setting, then press @. • [Auto]: Normally select this. The system changes [RF Change] automatically. to [Onl or [Offl • [Onl: The system transmits searching sound by %r the better channel for transmitting. • [Off]: The system transmits fixing the channel 7 sound by for transmitting. Press @. The setting is made.
• The Control fk)r HDMI function may not work if you connect other than a Sony component, even if the component function. is compatible with the Control lk)r HDMI Usingthe Control for HDMI Function for "BRAVIA" Sync This function is available "BRAVIA" on TVs with the Sync function.
6 Press ,P/,I,to select the setting, then press @. • [Onl: On. • [offl: oft: (System Audio Control) You can simplify operation to enjoy TV sound via this system. To use this function, connect the system and the TV with an audio cord and an HDMI cable (System Power Off) (page 23).
1 Press HOME. The home menu appears on the TV screen. (Audio 2 3 Return Channel) The system can receive the digital audio signal of the TV via an HDMI cable when your TV is compatible with the Audio Return Channel 4 function. You can enjoy TV sound via the system by using just one HDMI cable. For details, see [Audio Return Channel] (page 58). Press <--/->to select _ [Setup]. Press ,I,/4,to select [Audio Settings], then press @. Press 'P/4, to select [Auto Calibration], then press @.
7 Press @. [Auto Calibration] Setting the Speakers starts. The system adjusts the speaker settings automatically. [Speaker Be quiet during the measurement. To obtain the best possible connection of the speakers m • Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier inan improper locatiom such as another room, proper measurement will not be obtained.
[Subwoofer] [Yesl • You can change measurement unils (feet or meters) by pressing the color button (RED). • [Distance] When you move the speakers, be sure to set the • [Level] parameters of the distance (I_) from the listening position to the speakers. You can adjust the sound level of the speakers. You can set the parameters flom -6.0 dB to +6.0 You can set the parameters to 7.0 meters). dB. Be sure to set [Test Tonel to [Onl tk,r easy The speakers flom 0 to 23 feet (0.0 adjustlilent.
9 Press 'I'/4, to select [Off], then press ®. m • The test lone signals are not output from the HDMI OUT jack. • To adjust lhe To caucel, press • t_r more thau 5 secouds so that "CHILD LOCK" aud "OFF" appear iu the fiout pauel display. • When you operate volume of all the speakers at one time, lhe buttons on the unit while the child lock l'unction is on, "CHILD the l'ront panel display. LOCK" appears in press VOL +/ .
SavingPower in Standby Mode Check that the following settings are made: - [Control for HDMI1 in [HDMI Settingsl is set to [Offl (page 47). - [Standbyl in IS-AIR Settingsl is set to [Offl (page 44). - [Quick Start Model is set to [Offl (page 58).
Icon Explanation _'1_ )) [Audio Settings] (page 55) Makes the audio seltings according to the type of connecting jacks. _'O (page 56) Viewing Settings] [BD/DVD Makes detailed settings for BD/ Usingthe Setup Display You can make various adjustments of items such as picture and sound. Select _ (Setup) ou the home meuu wheu you DVD playback. need to change the settings of the system. (page 57) Control Settings] [Parental Makes detailed settings for the Parental Control function.
• [Screen •If no picture [Component Format] [Ordinal]: Select this when connecting to a TV with a wide-mode function. Displays a 4:3 appears when setling [HDMI] or Vide()] resolution, try, another resolution setting. screen pictme in 16:9 aspect ratio even on a wide-screen TV.
[Off[: Outputs the primary audio only. Select this when outputting HD audio signals to an AV receiver. [On]: Enables all of the system's sound effects. The upper limit of sampling frequency is set to 48 kHz. • [Audio DRC] You can compress sound track. when you do not want to set the upper limit of sampling fiequency. [Off]: The sound effects are disabled. Select this the dynamic range of the • [Speaker Settings] [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only).
Enter the code for your language by referring to "Language Code List" (page 74). • [BD Hybrid Disc Playback Layer] [BD[: Plays BD layer. [DVD/CD[: Plays DVD or CD layer. • [BD Internet Connection] [Allow]: Normally select this. [Do not allow]: Prohibits Intemet • [DVD Parental Control] Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes. Follow the onscreen instructions password. connection.
• [S-AIR Settings] You can set up the S-AIR settings. For details, see "Using an S-AIR Product" (page 42). [ID]: You can set the ID of the system. [Pairingl: You can pair the system and S-AIR sub unit, such as a surround amplifier or S-AIR receiver. [RF Chang@ If wireless transmission is unstable, set this function. [Model: You can enjoy the system's sound in another rOOlil. [Standbyl: You can enjoy the S-AIR receiver while the unit is in standby mode. • [Dimmer] [Bri_zhtl: Bright lighting.
[Mauuall: Dowuloads disc iuformatiou wheu you select [Playback History Listl or [hfformatiou Displayl iu the optious meuu. For more iufonnatiou, go to http://www.souy.com/bluraysupport/ • [DivX® VOD] • [Network (Except for U.S. models) (Except for BDV-E370 (U.S. models)) You can display the registration or deregistmtion code t_r this system, or deregister this system after registration. When the registration [Registration displayed.
• Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipmeut (BDV-E570/BDV-T57 • If you use a pacemaker Precautions or other medical consult your physician medical device before function On safety • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the system, or only). device, or the manufacturer of your using the wireless LAN (BDV-E570/BDV-T57 only).
IMPORTANT NOTICE Caution: This system is capable of holding Notes about the Discs a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage Projection this. televisions On moving • Before moving to your television am especially screen. susceptible to On handling discs • To keep the disc clean, handle the disc by its edge.
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (S-AIR main unit and sub unit).
Symptom Problems Vide() signals arc only output from the HDMI OUT jack when connectiug the HDMI OUT j ack * Set [Output (page 55). and solutions Video Format] in [Screen • Set [Picture Quality Settings] to [Component Vide()] and other vide() output jacks at the same time. The dark area of the picture is too Mode] to [Standard] (default) (page 35). dark/the bright area is too bright or unnatural. The picture is not output • Check the [Output correctly.
Symptom Problems and solutions There is no digital sound l_om the HDMI OIJTjack when using the Audio Return Channel • Set [Control for HDMI] in [HDMI (page 57). Also, set [Audio Return Settings] to [Auto] (page 57). function. • Make sure that your TV is compatible • Make sure that an HDMI compatible frequency • Set [Audio Return (page 49). Return Channel Channel] Severe • Check that the connecting least 10 feet (3 meters) with the Audio in [HDMI Return Channel function.
Symptom Problems The disc does not play. • You are attempting to phty a disc with a format this system (page 69). and solutions • The region code on the BD/DVD that cannot be phtyed back by does not match the system. • Moisture has condensed inside the unit and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour. • The system cannot File names arc not displayed correctly, • The system character formats • Depending difl_rently.
Problems and solutions Symptom The Control for HDMI function does not work. • Set [Control for HDMI] (page 57). in [HDMI • Make sure that the connected HDMI] Settings] component of [System Settings] is compatible to IOn] with the [Control for function. • Check the connected component's Refer to the operating setting for the Control instructions supplied for HDMI function. with the component.
S-AIR Symptom Problems There is no sound from the • If you use another from the unit. S-AIR sub unit, noise is heard from the S-AIR sub unit, or sound from the S-AIR sub unit skips. and solutions S-AIR main unit, place it more than 25 feet (8 meters) away • Place the S-AIR main unit and S-AIR sub unit closer together. • Avoid use of equipment microwave oven. that generates electromagnetic energy, such as a • Place the S-AIR main unit and S-AIR sub unit away from other wireless products.
USB Wireless (BDV-E570 LAN Adapter and BDV.T57 only) Symptom The system cannot connect Problems and solutions to the network or the network connection is unstable. • The distance • Change between the unit and the wireless the USB Wireless LAN Adapter LAN router is too far (page 27). position. Other 68u_ Symptom Problems and solutions "Exxxx" appears in the front panel disphty, • Contact your nearest give the error code.
Note on playback BD/DVD Playable Discs operations of a Some playback operations ofa BD/DVD may be intentionally set by software producers. Since Blu-ray Disc BD-ROM ]) BD-R/BD-RE DVD 3) this system plays a BD/DVD according to the disc contents the software producers designed, 2) DVD-ROM some playback features may not be available.
• Some files edited on a PC may not play. Playable Types of Files up to folders Video Extensions MPEG-I Video/PS l) MPEG-2 Video/PS, ".mpg," TSI) ".avi," MPEG4/AVC • Some USB devices ".mpeg," ".n(2ts," ".rots" DivX 2) 1) ".ink'<" ".rap4?' ".l)(2t ".I)(ts" S," WMV91 ) ".wmv," AVCHD 3) ".m4v," may not work with this system. • The system can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD) that are FAT-compatible Capture Devices ".
SupportedAudioFormats Audio formats supported by this system are as follows. Format LPCM2ch LPCM5.1ch, DolbyDigital Dolby DTS LPCM7.1ch TrueHD, DolbyDigital Plus DTS-ES Discrete 6.1, DTS-ES Matrix6.1, DTS96/24 DTS-HD DTS-HD High Master Resolution Audio Audio "BD/DVD" 0 0 0 0 "SAT/CABLE" O Function 0 0 0 O 0 O "mY" (DIGITAL IN) O: Supported : Unsupported _brmat. format.
Specifications Amplifier Section U.S. models: POWER OUTPUT AND TOTAL Maximtlli1 current: LAN Section FM tuner section channels driven, from 180 - 20,000 Hz: rated 60 watts Tuning range North American per channel minimum RMS power, with no more than 1cX total harmonic Other models: from 250 milli watts to rated output.
Dimensions (approx.) Mass (approx.) Mbps 802.1 In: up to 300 Mbps (40 MHz/spatial streams: 0.28 kg (10 oz) Subwoofer (SS-WSB101) BDV-E370/BDV-T37 Speaker Speaker 802.11b:ll,5.5,2andl 290 mmx 49 mmx 49 mm (11 1/2in x 1 15/u, in × 1 15/l<.in) (w/h/d) for BDV-E870/ Subwoofer system unit Rated impedance Dimensions (approx.) 2) Tx: up to 500 mA Power consumption: Mass (Approx.
LanguageCode List The spellings conform to the IS() 639:1988 (E/F) standard.
BD-ROM Glossary BD-ROMs (Blu-my Disc Read-Only Memory) are commercially produced discs and are AVCHD The AVCHD t_rmat is a high-definition video camera foni-lat used to record SD digital (standard definition) or HD (high definition) signals of either the 1080i specification* or the 720p specification** on DVDs, using efficient data compression coding technology. The MPEG-4 AVC/H.264 t_rmat is adopted to compress video data, and the Dolby Digital or Linear PCM system is used to compress audio data.
Dolby Pro Logic DTS.HD II Audio DTS-HD done using an advanced, high-purity matrix surround decoder that extracts the spatial lossless compression, and DTS-HD Master Audio corresponds to a maximum sampling properties of the original recording without adding any new sounds or tonal colorations. fiequency • Movie mode The Movie mode is for use with stereo television shows and all programs encoded Surround. The result is enhanced directionality that approaches discrete 5.1 -channel sound.
Pop.up menu An enhanced menu operation available on BDROMs. The pop-up menu appears when POP UP/MENU is pressed during playback, and can be operated while playback is in progress. Progressive (sequential format scanning) In contrast to the Interlace progressive fonnat, format can reproduce the 50 - 60 fi'ames per second by reproducing all scanning lines (525 lines tbr the NTSC system). The overall picture quality increases and still images, text and horizontal lines appear sharper.
Index Numerics Dolby 24p True Cinema A A/V SYNC 36 Attenuate - AUDIO Audio Audio 56 DRC 56 Audio Audio Output Return Pro Logic Easy 58 Setup BD Hybrid Disc 28, 59 76 Control Area Code Connection Control Device FM MODE 40 Front panel Front panel 10 display Settings BD/DVD Viewing Settings BD/DVD-ROM 1080/24p 56 Rear panel 55 76 Deep Color Output Personal Information format 76 75 66 34 Blu-ray Disc 75 BONUSVIEW 32 Internet Internet Settings 59 Video Parental Internet Vid
Surround amplifier 42 System Information 59 SYSTEM MENU 30,36,38, 39 T Test Tone 51 TV Type 54 u Update 54 USB 33 W WE]P 27 WPA2-PSK WPA2-PSK WPA-PSK WPA-PSK (AES) 27 (TKIP) 27 (AES) 27 (TKIP) 27 79us