Help Guide (Web manual)

Digital HD Video Camera Recorder

HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275

Charging the battery pack using your computer

Charge the battery pack by connecting this product and your computer with the Built-in USB Cable. Insert the

battery pack in advance.

1. Close the LCD monitor.

2. Pull out the Built-in USB Cable from this product.

3. Connect this product to a running computer using the Built-in USB Cable.

The POWER/CHG (charge) lamp turns orange.

The POWER/CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the Built-

in USB Cable from the computer, and then store it in the pocket on the grip belt.

If the Built-in USB Cable is not long enough for the connection, use the USB connection support cable.

: Built-in USB Cable

: To a wall outlet (wall socket)

To put the Built-in USB Cable away

Put the Built-in USB Cable back in the pocket on the grip belt after use.

Help Guide

How to Use

101

Find