Specifications

75
GB
Others/Index
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
The drop sensor function (p. 70) is activated,
and has detected that the camcorder has been
dropped. Therefore, the camcorder is taking
steps to protect the internal hard disk.
Recording/playback may be disabled as a
result.
The drop sensor function does not guarantee
the protection of the internal hard disk under
all possible situations. Use the camcorder
under stable conditions.
The recording medium is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
REC Mode] is set to [Highest
Quality
] or [50p Quality ], you cannot
capture photos while recording movies.
Furthermore, if [
Frame Rate] is set to
[25p] (HDR-CX570E/CX580E/CX580VE/
PJ580E/PJ580VE/PJ600E/PJ600VE), you
cannot record photos while the camcorder is
in movie recording standby mode.






Recording time of
movies/number of
recordable photos
“HD” stands for high definition image
quality, and “STD” stands for standard
definition image quality.
Expected time of recording and
playback with each battery pack
Recording time
Approximate time available when you use a
fully charged battery pack.
HDR-CX250E/CX260E/CX260VE/
CX270E
(unit: minute)
Battery pack
Continuous
recording time
Typical recording
time
Image quality HD STD HD STD
NP-FV50
(supplied)
145 155 70 75
NP-FV70 300 325 150 160
NP-FV100 600 650 300 325
HDR-CX570E/CX580E/CX580VE/
PJ580E/PJ580VE
(unit: minute)
Battery pack
Continuous
recording time
Typical recording
time
Image quality HD STD HD STD
NP-FV50
(supplied)
120 130 60 65
NP-FV70 250 270 125 135
NP-FV100 500 535 250 265