Handycam® Handbook
89
Additional information
US
Buffer overflow
You cannot record because the drop sensor
senses a drop of the camcorder repeatedly.
If you are at risk of dropping the camcorder
constantly, set [DROP SENSOR] to [OFF],
and you may be able to record the image again
(p
. 79).
Recovering data.
Your camcorder tries to recover data
automatically if the data writing was not
performed properly.
Cannot recover data.
Writing data onto the media of the camcorder
has failed. Attempts were made to recover the
data, but they were unsuccessful.
Reinsert the memory card.
Reinsert the memory card a few times. If even
then the indicator flashes, the memory card
could be damaged. Try with another memory
card.
This memory card is not formatted
correctly.
Format the memory card (p. 74). Note that if
you format the memory card, all the recorded
movies and photos are deleted.
Still picture folder is full. Cannot record
still pictures.
You cannot create folders exceeding
999MSDCF. You cannot create or delete
created folders using your camcorder.
F
ormat the memory card (p. 74), or delete
folders using your computer.
This memory card may not be able to
record or play movies.
Use a memory card recommended for your
camcorder (p. 18).
This memory card may not be able to
record or play images correctly.
Use a memory card recommended for your
camcorder (p. 18).
Do not eject the memory card during
writing. Data may be damaged.
Reinsert the memory card, and follow the
instructions on the LCD screen.
Other
No further selection is possible.
You can select only 100 images at one time for:
Deleting movies/photos
Protecting movies/photos, or releasing the
protection
Dubbing movies
Copying photos
Editing the Playlist of high definition image
quality (HD) movies
Data protected.
You tried to delete protected data. Release the
protection of the data.