2-583-749-01(1) TFT LCD Color Computer Display Quick Setup Guide US Guide de configuration rapide FR Guía de instalación rápida ES DO NOT RETURN TO PLACE OF PURCHASE NE PAS RETOURNER AU MAGASIN If you believe the product purchased in the U.S. is defective, call Sony for assistance or Advance Exchange. For assistance in the U.S. call: 1-866-357-SONY (7669) For assistance in Canada call: 1-800-961-SONY (7669) Si vous croyez que le produit acheté aux E.-U.
Owner’s Record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Serial No. Model No. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the unit. Do not open the cabinet. Refer servicing to qualified personnel only. Precautions Warning on power connections • Use the supplied power cord.
To view the Operating Instructions on the CDROM Note To view the Operating Instructions on the CD-ROM, Macromedia Shockwave Player and Adobe Acrobat Reader (version 6.0 or later) must be installed on your computer. The “installs” folder on the CD-ROM contains the installation programs for them. If you want to install those programs, open the “My Computer” and right-click on the CD-ROM drive, then select “Explore” and open the “installs” folder.
5 Connect the power cord to a power outlet. 2 back cover Turning on the monitor and computer Turn on your monitor first, then a computer. 1 Press upward the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green.
Troubleshooting Trouble symptoms and remedies (If no picture appears on the screen) If no picture appears on the screen, check the following table for possible solutions. If you are experiencing difficulties not listed below, refer to the Operating Instructions on the supplied CD-ROM. For problems caused by a computer or other equipment, refer to the user’s manuals supplied with the respective items.
Symptom Check these items If OUT OF RANGE appears on the screen, x Problems caused by a computer or other equipment connected, and not caused by the monitor • Check that the video frequency range is within that specified for the monitor.
Specifications LCD panel Panel type: a-Si TFT Active Matrix Picture size: 17.0 inch Input signal format RGB operating frequency* Horizontal: 28–80 kHz Vertical: 48–75 Hz Resolution Horizontal ×Vertical: Max. 1280 dots × 1024 lines Input signal levels Analog RGB video signal: 0.7 Vp-p, 75 Ω, positive SYNC signal: TTL level, 2.2 kΩ, positive or negative (Separate horizontal and vertical) Power requirements 100–240 V, 50–60 Hz, Max. 1.0 A Power consumption Max.
AVERTISSEMENT Pour prévenir tout risque d’incendie ou d’électrocution, n’exposez jamais l’appareil à la pluie ou à l’humidité. Des tensions extrêmement élevées sont présentes à l’intérieur de l’appareil. N’ouvrez jamais le boîtier de l’appareil. Confiez l’entretien à un technicien qualifié uniquement. Précautions Avertissement sur les raccordements d’alimentation • Utilisez le cordon d’alimentation fourni.
Pour lire le mode d’emploi sur le CD-ROM Remarque Pour pouvoir lire le mode d’emploi figurant sur le CD-ROM, vous devez installer Macromedia Shockwave Player et Adobe Acrobat Reader (version 6.0 ou plus récente) sur votre ordinateur. Le dossier « installs » du CD-ROM contient les programmes d’installation de ces logiciels.
4 Raccordez le cordon d’alimentation fourni au connecteur AC IN du moniteur. 5 Raccordez le cordon d’alimentation secteur à une prise secteur. 2 Panneau arrière Remarque Pour de plus amples informations sur la fixation des cordons, reportez-vous au mode d’emploi sur le CD-ROM. Mise sous tension du moniteur et de l’ordinateur Mettez d’abord votre moniteur sous tension, puis l’ordinateur. 1 Appuyez sur le commutateur 1 (alimentation) situé à droite de la face avant du moniteur.
Dépannage Problèmes et solutions (si aucune image n’apparaît à l’écran) Si aucune image n’apparaît à l’écran, recherchez une solution possible dans le tableau suivant. Si vous rencontrez des problèmes qui ne sont pas abordés ci-dessous, reportez-vous au mode d’emploi sur le CD-ROM fourni. Si les problèmes sont causés par l’ordinateur ou un autre appareil, reportez-vous au mode d’emploi fourni avec l’appareil concerné.
Problème Vérifiez les points suivants Si HORS PLAGE FRÉQUENCES apparaît à l’écran, x Problèmes causés par un ordinateur ou un autre appareil raccordé et non par le moniteur • Vérifiez que la plage de fréquence vidéo est comprise dans la plage spécifiée pour le moniteur.
Spécifications Panneau LCD Type de panneau : a-Si TFT à matrice active Taille de l’image : 17,0 pouces (43 cm) Format du signal d’entrée Fréquence opérationnelle RVB* Horizontale : 28–80 kHz Verticale : 48–75 Hz Résolution Horizontale × Verticale: Max. 1280 points × 1024 lignes Niveaux des signaux d’entrée Signal vidéo RVB analogique : 0,7 Vp-p, 75 Ω, positif Signal SYNC : Niveau TTL, 2,2 kΩ, positif ou négatif (horizontal et vertical séparément) Puissance de raccordement 100–240 V, 50–60 Hz, Max.
ADVERTENCIA Para evitar el riesgo de incendios o de electrocución, no exponga la unidad a la lluvia ni a la humedad. La tensión existente dentro de la unidad es muy elevada y puede resultar peligrosa. No abra el aparato. Solicite asistencia técnica únicamente a personal cualificado. Precauciones Advertencia sobre la conexión de la alimentación • Utilice el cable de alimentación suministrado.
Visualizar el manual de instrucciones del CDROM Instalación Desembalaje Nota Para ver el manual de instrucciones del CDROM, Macromedia Shockwave Player y Adobe Acrobat Reader (versión 6.0 o posterior) deben estar instalados en su PC. La carpeta “installs” del CD-ROM contiene los programas de instalación de los mismos. Si desea instalar dichos programas, abra el icono “Mi PC” y haga clic con el botón derecho en la unidad de CD-ROM, a continuación, seleccione “Explorar” y abra la carpeta “installs”.
5 Conecte el cable de alimentación a la toma de corriente. 2 cubierta posterior Encender el monitor y el ordenador Primero, encienda el monitor y, a continuación, el ordenador. 1 Pulse el interruptor 1 (alimentación) situado en la parte frontal derecha del monitor. El indicador 1 (alimentación) se ilumina en verde.
Resolución de problemas Problemas y soluciones (Si no aparece ninguna imagen en la pantalla) Si no aparece ninguna imagen en la pantalla, compruebe la tabla siguiente para obtener posibles soluciones. Si el problema no aparece en la lista, consulte el manual de instrucciones en el CDROM suministrado. Para aquellos problemas causados por el ordenador u otro equipo, consulte los manuales de usuario suministrados con los artículos correspondientes.
Problema Compruebe lo siguiente Si FUERA DEL ALCANCE aparece en la pantalla, x Problemas causados por un ordenador u otro equipo conectado, y no por el monitor • Compruebe que el rango de frecuencia de vídeo se encuentre dentro del rango especificado para el monitor.
Especificaciones Panel LCD Tipo de panel: Matriz activa a-Si TFT Tamaño de imagen: 43,18 cm (17,0 pulgadas) Formato de la señal de entrada Frecuencia de funcionamiento RVA* Horizontal: 28–80 kHz Vertical: 48–75 Hz Resolución Horizontal × Vertical: Máx. 1 280 puntos × 1 024 líneas Niveles de señal de entrada Señal de vídeo RGB analógica: 0,7 Vp-p, 75 Ω, positiva Señal SYNC: Nivel TTL, 2,2 kΩ, positiva o negativa (Horizontal y vertical independiente) Requisitos de alimentación 100–240 V, 50–60 Hz, Máx.
Sony Corporation Printed in China