Sound Bar Operating Instructions HT-CT370
WARNING The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).
Table of contents Useful functions Installing the Bar Speaker on a wall ..................................... 4 Using the Control for HDMI function .................................... 6 Using “BRAVIA” Sync features ...............................................7 Controlling the system using a smartphone or tablet device (SongPal) .......................................................................... 8 Adjusting the settings ..........................................................
1 Useful functions Installing the Bar Speaker on a wall You can install the Bar Speaker on a wall. Notes Fix the supplied wall mounting brackets to the bracket fixing holes on the bottom of the Bar Speaker with the supplied screws so that the surface of each wall mounting bracket is as shown in the illustration. Fix the two wall mounting brackets to the left and right fixing holes on the bottom of the Bar Speaker.
2 Prepare screws (not supplied) that are suitable for the holes on the back of the wall mounting brackets. 4 mm 4 Hang the wall mounting brackets fixed on the Bar Speaker on the screws. Align the holes in the wall mounting brackets with the screws, then hang the Bar Speaker on the two screws. Useful functions More than 25 mm 4.4 mm 9.8 mm Hole on the wall mounting bracket 3 Fasten the screws to two studs in the wall. The screws should protrude 6 to 7 mm.
Using the Control for HDMI function By using the Control for HDMI function, and connecting equipment that is compatible with the Control for HDMI function via a High Speed HDMI cable, operation is simplified with the features below. The Control for HDMI function is enabled by setting “CTRL (Control for HDMI)” to “ON” (page 11). The default setting is “ON.” One-Touch Play When you activate the equipment (Blu-ray Disc™ player, “PlayStation®4,” etc.
If the connected equipment is not compatible with copyrightprotection technology (HDCP), the image and/or the sound from the HDMI OUT jack of this system may be distorted or may not be output. In such a case, check the specifications of the connected equipment. When “TV” is selected as the input source of the system, video signals via one of the HDMI IN 1/2/3 jacks selected last time are output from the HDMI OUT jack. This system supports Deep Color, “x.v.Colour,” 3D, and 4K transmission.
Controlling the system using a smartphone or tablet device (SongPal) “SongPal” is the application to operate the system with your smartphone or tablet, etc. “SongPal” is available from either Google Play™ or App Store. This function is enabled by setting “BT PWR (BLUETOOTH power)” to “ON” (page 11). The default setting is “ON.” When using an Android™ device 1 2 3 4 5 6 PAIRING 8GB Press the (on/standby) button on the remote control. The display of the Bar Speaker lights.
One-Touch connection using the Android device with the NFC function built-in (NFC) Perform steps 1 to 3 of “When using an Android device.” After the BLUETOOTH connection display appears on the Android device, touch the Android device with the N mark of the Bar Speaker. When the connection has been established, the lamp (blue) of the Bar Speaker lights. 1 2 3 4 5 Press the (on/standby) button on the remote control. The display of the Bar Speaker lights. Press the PAIRING button on the remote control.
Adjusting the settings You can set the following items with the AMP MENU button on the remote control. Your settings are retained even if you disconnect the AC power cord (mains lead). 1 Press the AMP MENU button on the remote control to display the amplifier menu window on the display of the Bar Speaker. 2 Select the desired setting, using the (return)/ (select)/ (proceed) button, and press the (enter) button. 3 Press the AMP MENU button to exit the amplifier menu window.
Menu HDMI Function ON P. THRU (Pass through) To set the power saving mode of the pass-through function for HDMI signals. (AUTO/ON) AUTO: Outputs signals from the HDMI OUT jack of the system in standby mode according to the status of the TV. This setting saves power in standby mode compared with the “ON” setting. ON: Always outputs signals from the HDMI OUT jack in standby mode. If any TV other than “BRAVIA” is connected, use the system with the “ON” setting.
Set up the wireless subwoofer connection again. Linking the system (LINK) 1 2 3 4 (return)/ (select)/ (proceed)/ (enter) AMP MENU On/standby lamp LINK button 12GB 5 6 Press the AMP MENU button on the remote control. Select “WS” with the (select) button then press the (enter) or (proceed) button. Select “LINK” with the (select) button then press the (enter) or (proceed) button. When “START” appears on the display of the Bar Speaker, press the (enter) button.
Do not place anything at the rear of the Bar Speaker and subwoofer that might block the ventilation holes and cause malfunctions. Miscellaneous Precautions Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. Do not climb on the Bar Speaker and subwoofer, as you may fall down and injure yourself, or system damage may result.
Copyrights This system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories. ** Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks of DTS, Inc.
BLUETOOTH wireless technology Turn off the power to the wireless LAN equipment when using your BLUETOOTH device within 10 meters (33 feet). Effects on other devices Supported BLUETOOTH version and profiles Profile refers to a standard set of functions for various BLUETOOTH product features. Refer to “Specifications” (page 23) for the BLUETOOTH version and profiles supported by this system. use the BLUETOOTH function, the BLUETOOTH device to be connected must support the same profile as this system.
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Be sure to bring both your Bar Speaker and subwoofer, even if it seems as though only one has a problem, when you request to repair. POWER The system does not power up. Check that the AC power cord (mains lead) is connected securely.
BLUETOOTH BLUETOOTH connection cannot be completed. Make sure that the lamp (blue) of the Bar Speaker is lit (refer to “Listening to the sound from BLUETOOTH devices” in the supplied Startup Guide).
Sound skips or has noise. If there is a device nearby that generates electromagnetic waves like a wireless LAN or an electronic oven in use, locate the system apart from it. If there is an obstacle between the Bar Speaker and the subwoofer, move or remove it. Locate the Bar Speaker and the subwoofer as close as possible. Switch the wireless LAN frequency of any nearby Wi-Fi router or personal computer to 5-GHz range. REMOTE CONTROL The remote control of this system does not function.
Front/Top Parts and controls Bar Speaker Rear/Bottom AC power cord (mains lead) ANALOG IN jack DIGITAL IN (OPT (TV)) jack HDMI IN 1/2/3 jacks HDMI OUT (TV (ARC)) jack continued 19GB Miscellaneous (on/standby) button INPUT button PAIRING button VOL (volume) +/– buttons N mark When using the NFC function, touch your NFC device to the mark. Remote control sensor Lamp White: when the display of the Bar Speaker is turned off.
Subwoofer 20GB On/standby lamp LINK button (on/standby) button AC power cord (mains lead)
Remote control The supplied remote control can control the system and the connected devices. Some devices may not be controlled by it. In such a case, use the remote control of the device. Note INPUT button (on/standby) button DISPLAY button To switch the brightness (Bright/Dark/Off) of the display of the Bar Speaker. When the display brightness is set to “Off,” the display is turned off after the display shows operation status for several seconds.
Operation of the BLUETOOTH device / buttons To skip a track. / buttons To fast reverse or to fast-forward the music when pressed during playback. Playback control buttons *2 (playback)/ (pause)/ (stop) To start, pause or stop the playback. To restart playback during a pause, press the button again. Setting the manufacturer of the TV 1 Note These are the basic operation examples. There may be a device that may not be operated or may work differently.
Specifications Bar Speaker (SA-CT370) Amplifier section BLUETOOTH section Communication system BLUETOOTH Specification version 3.0 Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx. 10 m1) Maximum number of devices to be registered 9 devices Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.
Subwoofer (SA-WCT370) POWER OUTPUT (reference) 100 W (per channel at 4 ohms, 100 Hz) Speaker system Subwoofer system, Bass reflex Speaker 100 mm × 150 mm cone type Rated impedance 4 ohms Power requirements 110 V - 240 V AC, 50 Hz/60 Hz Power consumption On: 30 W Standby mode: 0.5 W or less Dimensions (approx.) (w/h/d) 135 mm × 361.5 mm × 394 mm (vertical) 361.5 mm × 135 mm × 394 mm (horizontal) Mass (approx.) 7.
©2014 Sony Corporation Printed in China 4-536-808-11(1)