Sound Bar The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony.com/soundbarsupport Le logiciel de ce système est susceptible d’être mis à jour. Pour en savoir plus sur les éventuelles mises à jour disponibles, visitez l’URL suivante. http://www.sony.com/soundbarsupport El software de este sistema podria actualizarse en el futuro.
Owner’s Record The model and serial numbers are located on the bottom of the Bar Speaker. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. Indoor use only. For the Bar Speaker Model No. HT-NT5 The nameplate and date of manufacture are located on the bottom of the Bar Speaker. Serial No. For the customers in the U.
stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). Compliance with FCC requirement 15.
Table of Contents Supplied Accessories ..................... 7 Guide to Parts and Controls ..........8 About the Home Menu ................ 13 Connecting and Preparation Basic Startup Guide connections and (separate preparation document) Connection for Viewing Copyrightprotected 4K Content ............ 16 Mounting the Unit on a Wall ....... 18 Attaching the Grille Frame .......... 19 Connecting to a Wired Network .................................20 Connecting to a Wireless Network .......................
Saving Power in Standby Mode ..................................... 46 Sending the Remote Signal to the TV via the Unit ........................47 Using the Control for HDMI Function .................................47 Using the “BRAVIA” Sync Function ................................ 49 Using the Setup Display ............... 51 Options Menu List ....................... 59 Troubleshooting Troubleshooting .......................... 60 Resetting the System ..................
• R03 (size AAA) batteries (2) Supplied Accessories • Bar Speaker (1) • HDMI cable (4K 60p 18Gbps compatible) (1) • Grille frame (1) • Startup Guide (1) • Wall mounting brackets (2), Screws (2), Grille frame support hook (2) • Operating Instructions (1) • Subwoofer (1) • Remote control (1) 7US
Guide to Parts and Controls Details are omitted from the illustrations. Unit (Bar Speaker) Front Remote control sensor N-Mark (page 32) When using the NFC function, touch your NFC-compatible device to the mark.
Rear LAN(100) port TV IN (OPTICAL) jack ANALOG IN jack HDMI IN 3 jack Compatible with HDCP 2.2. HDMI IN 2 jack Compatible with HDCP 2.2. HDMI IN 1 jack Compatible with HDCP 2.2. HDMI OUT (TV (ARC)) jack Compatible with HDCP 2.2.
Subwoofer Power indicator – Lights in red: The subwoofer is in standby mode – Flashes in green: While attempting link connection – Lights in green: The subwoofer is connected to the system with the link function (power) button Turns on the subwoofer or sets it to standby mode. LINK button (page 43) Ventilation holes For safety, do not block the ventilation holes.
Remote Control INPUT +/– (page 13, 24) (power) Turns on the system or sets it to standby mode. DISPLAY Displays playback information on the TV screen. CLEAR AUDIO+ (page 27) SOUND FIELD (page 27) VOICE (page 28) NIGHT (page 28) DIMMER (page 45) Color buttons Shortcut keys for selecting items on some menus. MIRRORING (page 41) PAIRING (page 31) OPTIONS (page 29, 59) BACK (page 13) /// (page 13) (enter) (page 13) HOME (page 13) (muting) Turns off the sound temporarily.
Playback operation buttons / (rewind/fast forward) Searches backward or forward. / (previous/next) Selects the previous/next chapter, track, or file. (play) Starts or re-starts playback (resume play). (pause) Pauses or re-starts playback. (stop) Stops playback.
About the Home Menu You can display the home menu on the TV screen by connecting the system and TV with the HDMI cable (supplied). From the home menu, you can set the various settings by selecting [Setup] or select the input or service that you want to watch from the input list. [Wireless Surround] [Setup] Input list Using the Home Menu ///, (enter) HOME BACK 1 Press HOME. The home menu appears on the TV screen. 2 Press /// to select Surround], then press .
Input list Input name Explanation [TV] Outputs the TV sound. (page 24) [HDMI1] Outputs the sound of device that is connected to the HDMI IN 1 jack. (page 24) [HDMI2] Outputs the sound of device that is connected to the HDMI IN 2 jack. (page 24) [HDMI3] Outputs the sound of device that is connected to the HDMI IN 3 jack. (page 24) [Bluetooth Audio] Outputs the sound of device that is connected with the BLUETOOTH function.
About the Steps Description In these Operating Instructions, the operations are described as steps that are operated on the home menu displayed on the TV screen by using the remote control while the system and TV are connected with the HDMI cable (supplied). The operating steps that select items on the TV screen by using /// and simplified in the following way. Example: Select [Setup] from the home menu. The operation that selects an item by pressing /// and “select.
Connecting and Preparation Connection for Viewing Copyright-protected 4K Content Connecting a 4K TV and 4K Device To view copyright-protected 4K content and listen to sound from the system, connect the TV and device to the system via an HDCP2.2-compatible HDMI jack. You can only view copyright-protected 4K content through the HDCP2.2compatible HDMI jack connection. HDCP2.2compatible HDMI jack HDCP2.2compatible HDMI jack TV Blu-ray Disc™ player, cable box, or satellite box, etc.
3 Connecting and Preparation 4 Connect the HDCP2.2-compatible HDMI output jack of the 4K device and HDMI IN jack of the unit with the HDMI cable (not supplied). Refer to the operating instructions of the 4K device to check that the HDMI OUT jack of the 4K device is compatible with HDCP2.2. 4K device connection is completed. Play copyright-protected 4K content. The image appears on the TV screen and the sound is output from the system.
Mounting the Unit on a Wall 1 You can mount the unit on a wall. Fix the wall mounting brackets (supplied) to the bracket fixing holes on the bottom of the unit with the screws (supplied) so that the surface of each wall mounting bracket is as shown in the illustration. Fix the two wall mounting brackets to the left and right fixing holes on the bottom of the unit. Screw (supplied) Notes • Prepare screws (not supplied) that are suitable for the wall material and strength.
3 920 mm (36 11/50 in) 8 mm to 9 mm (approx. 11/32 in) 4 Attaching the Grille Frame You can protect the speakers by attaching the supplied grille frame. We recommend that you use the unit without attaching the grille frame if you will be listening to High-Resolution Audio. Attach the grille frame parallel to the front panel. Attach the grille frame right-side up. Hang the holes of the mounting bracket on the screws.
Attaching the Grille Frame When Mounting on a Wall Attach the grille frame support hook to the grille frame to prevent the grille frame from falling. 1 Insert the grille frame support hook into the hook on the grille frame, then lift it up. Connecting to a Wired Network Prepare the network by connecting the system and PC to your home network with a LAN cable. Connecting to a PC or Router with a LAN Cable The following illustration is the example for connection of the system and PC to your home network.
1 2 3 4 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen. 5 6 Perform the setting by following the on-screen instructions. The system starts network settings and the network setting status appears. Press / to browse information, and then press . Select [Save & Connect]. The system starts connecting to the network. For details, refer to the messages that appear on the TV screen.
Connecting to a Wireless Network Prepare the network by connecting the system and PC to your wireless LAN router. Connecting by Selecting the Network Name (SSID) If your wireless LAN router (access point) is not compatible with Wi-Fi Protected Setup (WPS), check the following information in advance. – The network name (SSID)* Note The server needs to be connected to the same network as that of the system.
Connecting and Preparation Connecting by Using a Fixed IP Address Select [New connection registration] [Manual registration] in step 4 of “Connecting by Selecting the Network Name (SSID)”and follow the on-screen instructions. Connecting by Using a PIN Code Select [New connection registration] in step 4 of “Connecting by Selecting the Network Name (SSID)” and select [(WPS) PIN Method]. Connecting by SongPal SongPal app can connect the system to the same wireless network as that of the mobile device.
Listening to the Sound Listening to the TV 1 2 3 4 Press HOME. The home menu appears on the TV screen. Listening to the Connected Device 1 2 Select [TV] on the home menu. Select the program using the TV’s remote control. The selected TV program appears on the TV screen and the TV sound is output from the system. Adjust the volume. • Adjust the volume by pressing +/– on the remote control. • Adjust the subwoofer volume by pressing SW +/– on the remote control (page 29). 3 Press HOME.
4 Press to complete. Listening to Music on a USB Device You can play music/photo files stored on a connected USB device. For playable types of files, see “Playable Types of Files” (page 71). 1 Tip Connect the USB device to the (USB) port. When you change the input name, the displayed icon is also changed automatically. 2 3 4 5 Press HOME. The home menu appears on the TV screen. Select [USB (Connected)] from the home menu. Select [Music] - folder on which songs are stored - song.
off before connecting or removing the USB device. Tip You can perform various operations from the options menu (page 59). Viewing Photos on a USB Device You can play photo files stored on a connected USB device. For playable types of files, see “Playable Types of Files” (page 71). Select [Photo] - folder on which photos are stored - photo in step 4. The selected photo appears on the TV screen. Tip You can perform various operations from the options menu (page 59).
Selecting the Sound Effect You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. Explanation [Sports] Commentary is clear, cheers are heard as surround sound, and sounds are realistic. [Game Studio] Sound effects are optimized for game play. [Standard] Sound effects are optimized for the individual source. Note When using the wireless multi room or wireless surround function, the sound field function is not available.
Enjoying Clear Sound with Low Volume at Midnight (NIGHT) Making Dialogues Clearer (VOICE) Sound is output at low volume with minimum loss of fidelity and clarity of dialogue. VOICE NIGHT 1 1 2 2 Press NIGHT. The night mode appears on the TV screen. Press the button repeatedly to select the night mode. Mode Explanation [On] Activates the night mode function. [Off] Deactivates the night mode function. Press VOICE. The voice mode appears on the TV screen.
Adjusting the Volume of the Subwoofer The subwoofer is designed for playback of bass or low frequency sound. When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input. ///, Press SW (subwoofer volume) +/– to adjust the volume of the subwoofer.
When Watching Another Device 1 2 3 Press OPTIONS. The options menu appears on the TV screen. Select [A/V SYNC]. Adjust the delay using /, then press . You can adjust from 0 msec to 300 msec in 25 msec increments.
Listening to Music/Sound with the BLUETOOTH Function Listening to Music by Pairing with a Mobile Device 1 Listening to Music from a Mobile Device Press PAIRING. The system enters the pairing mode, “BT” appears in the front panel display, and the BLUETOOTH indicator flashes quickly. 2 INPUT +/– PAIRING 3 SW +/– HOME +/– Playback operation buttons RX/TX 4 5 Turn on the BLUETOOTH function, and then select “HT-NT5” after searching for it on the mobile device.
To check the connection status of the BLUETOOTH function Status BLUETOOTH indicator During pairing standby status Flashes quickly in blue Connection is being attempted Flashes in blue Connection has been established Lights in blue Not connected Off 3 4 5 Tips • Once the BLUETOOTH connection is established, an indication recommending which application to download will be displayed according to what device you have connected.
and BLUETOOTH connection are performed automatically. Compatible devices Smartphones, tablets, and music players with the NFC function built-in (OS: Android™ 2.3.3 or later, excluding Android 3.x) 1 Touch the N mark on the unit with the mobile device. Keep touching until the mobile device vibrates and message appears on the mobile device. Follow the on-screen instructions to complete pairing of the unit and mobile device. BLUETOOTH indicator 3 4 Make sure that the BLUETOOTH indicator lights in blue.
When the BLUETOOTH connection is established, [Bluetooth device is connected.] appears. (The connected device name also appears.) If you cannot find name of your headphones or speaker in [Device List], select [Scan]. Listening to Sound of the Connected TV or Device from Headphones or Speakers You can listen to sound of the connected TV or device from BLUETOOTH-compatible headphones or speakers by connecting it with the BLUETOOTH function.
Listening to Sound with Paired Headphones or Speakers 1 2 4 5 Select the desired input. For selecting input, see “Using the Home Menu” (page 13). Set the BLUETOOTH function of the headphones or speaker to on. Press RX/TX on the remote control. [Bluetooth Mode] is set to [Transmitter] and “BT TX” appears in the front panel display. The system automatically reconnects to the headphones or speaker it was most recently connected to, then the sound is output from the headphones or speaker.
Listening to Music on a PC Enjoying with the Network Function PC Listening to Music on your PC via a Home Network Wireless LAN router You can play music files stored on your PC via your home network. Music files can be played by operating on the on-screen display (OSD) of the system or dedicated app SongPal on a mobile device such as a smartphone or tablet. Preparing the Home Network 1 2 3 Connect the system to a network.
Listening to Music on a PC by Using SongPal Listening to Music on Music Services PC You can listen to music services offered on the Internet with this system. To use this function, the system must be connected to the Internet. 1 Wireless LAN router 2 3 You can play music files stored on the PC by operating the dedicated app SongPal that is downloaded to a mobile device such as a smartphone or tablet. For details of SongPal, see “What You can Do with SongPal” (page 38) or the following URL.
Enjoying music on the USB device Listening to Music on the Mobile Device with SongPal What You can Do with SongPal SongPal is an application for controlling compatible Sony audio devices using your smartphone/iPhone. Search for SongPal at Google Play or the App Store and download it onto your smartphone/iPhone. You can play music on a device connected to the (USB) port on the unit. Note What you can control with SongPal varies depending on the connected device.
Using Google Cast Google Cast allows you to select music content from the Google Cast-enabled app and play back on the unit. Google Cast requires the initial setup using SongPal. 1 2 4 5 6 Connect the device by Wi-Fi to the same network as that of the system (page 22). Start SongPal, select the system, and tap [Settings] - [Google Cast] [Learn how to Cast]. You can enjoy music in any room or listen to music in surround sound by using the system with the SongPal Linkcompatible wireless speaker.
Adding Rear Speakers (Wireless Surround) function and connect the wireless speaker to the internet. • When using the wireless surround function, the wireless LAN function is not available. Connect to the network with a wired LAN. • When using the wireless surround function, the Screen mirroring function (page 41) is not available. • When using the wireless surround function, you cannot set [Bluetooth Mode] to [Transmitter] (page 53).
2 Select the system on SongPal, then perform the setting by following the instructions on SongPal. Note The SongPal settings are effective with the SongPal version 4.0 or later. For details about SongPal downloading, see “Using SongPal” (page 38). To cancel the wireless surround function [Screen mirroring] is a function to display the screen of a mobile device on the TV by Miracast technology. The system can be connected directly with a Screen mirroring-compatible device (e.g. smartphone, tablet).
Notes • When using Screen mirroring, the quality of picture and sound may sometimes be deteriorated due to interference from other networks. • Depending on the usage environment, the quality of the picture and sound may be deteriorated. • Some network functions may not be available during Screen mirroring. • Make sure that your device is compatible with Miracast. Connectivity with all Miracast compatible devices is not guaranteed. Canceling Screen Mirroring Press HOME or BACK.
3 Using the Various Functions/ Settings Performing the Wireless Connection of the Subwoofer (LINK) Perform the wireless connection of the subwoofer again for a better connection. 4 5 LINK Power indicator Press LINK on the rear of the subwoofer. The power indicator of the subwoofer flashes in green. Proceed to the next step within 1 minute. Select [Start]. The link setting starts. To return to the previous display, select [Cancel]. Complete the link setting by following the on-screen message.
Playing Compressed Audio Files with Upscaling to Near HiResolution Sound Quality Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the system receives a Dolby Digital multiplex broadcast signal. DSEE HX upscales existing sound sources to near hi-resolution sound quality, and it makes you feel as if you are in a recording studio or at a concert. This function is only available when [Music] is selected as the sound field (page 27). 1 2 3 4 AUDIO Press HOME.
Deactivating Buttons on the Unit You can deactivate buttons on the unit for preventing misoperation, such as child mischief (Child lock function). Changing the Brightness of the Front Panel Display and BLUETOOTH Indicator (DIMMER) You can change the brightness of the front panel display and BLUETOOTH indicator. Press VOL –, VOL +, and VOL – in order while pressing and holding INPUT on the unit. “LOCK” appears in the front panel display, and buttons on the unit do not work.
Note The front panel display is turned off when “OFF” is selected. It turns on automatically when you press any button, then turns off again if you do not operate the system for about 10 seconds. However, in some cases, the front panel display may not turn off. In this case, the brightness of the front panel display is same as “DARK.” 46US Saving Power in Standby Mode Check that you have made the following settings: – [Bluetooth Standby] is set to [Off] (page 54).
Sending the Remote Signal to the TV via the Unit When the unit obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, enable the IR repeater function of the system. You can control the TV with the remote control of the TV by sending the remote signal from the rear of the unit. 2 3 4 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen. Select [System Settings] - [IRRepeater].
completed, “DONE” appears in the front panel display. System Power Off Function When you turn off the TV, the system and the connected device will turn off automatically. Set [System Settings] - [HDMI Settings] [Standby Linked to TV] on the system to [On] or [Auto] (page 55). The default setting is [Auto]. Note The connected device may not turn off depending on the status of the device. • Depending on the settings of the TV, the System Audio Control function may not be available.
Remote Easy Control You can operate the system by selecting the system from the TV’s Sync Menu. This function can be used if the TV supports the Sync Menu. For details, refer to the operating instructions of your TV. Notes • In the TV’s link menu, the system is recognized by the TV as “Player.” • Some operations may not be available with some TVs.
Echo Canceling Function Echo is reduced when you use Social Viewing function such as Skype while watching TV programs. This function can be used if the TV supports Social Viewing function. For details, refer to the operating instructions of your TV. Notes • If the input of the system is [HDMI1], [HDMI2] or [HDMI3] when using the Social Viewing function, the input is automatically changed to [TV]. Sound of the Social Viewing and TV program is output from the speakers of the system.
Using the Setup Display You can make various adjustments to items such as picture and sound. The default settings are underlined. 1 2 3 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen. Select the setting item. Setting item Explanation [Software Update] Updates the software of the system. (page 52) Makes the screen settings according to the type of TV.
[Software Update] By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: http://www.sony.com/soundbarsupport Notes • An Internet environment is necessary to perform updates via Internet. • During a software update, “UPDT” appears in the front panel display. After the update is complete, the system automatically reboots.
[Audio DRC] [Auto]: Automatically detects the type of external device, and then switches to the matching color setting. [YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals. [YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals. [RGB]: Select this when connecting to a device with an HDCP compliant DVI jack. You can compress the dynamic range of the sound track. [Auto]: Automatically compresses sound encoded in Dolby TrueHD.
using BLUETOOTH-compatible headphones or speaker. [Receiver]: This system is in receiver mode, which enables it to receive and output audio from the BLUETOOTH device. [Transmitter]: This system is in transmitter mode, which enables it to send audio to the BLUETOOTHcompatible headphones or speaker. If you switch the input of the system, “BT TX” appears on the front panel display. [Off]: The BLUETOOTH function is turned off and you cannot select the [Bluetooth Audio] input.
[Wireless Surround Settings] This setting is for using wireless speakers (not supplied) as the surround speakers of the system. For details, see “Adding Rear Speakers (Wireless Surround)” (page 40). [System Settings] [OSD Language] You can select the language you want for the system on-screen display. You can perform wireless connection of the subwoofer again. For details, see “Performing the Wireless Connection of the Subwoofer (LINK)” (page 43).
[Enhanced format]: High-Quality HDMI format. Set only when using capable devices. Notes • Select [Enhanced format] only when the connected device and TV support HighQuality 4K* format. • Depending on the TV, the TV setting may be required. Refer to the operating instructions of the TV. • The picture may not be displayed properly if this setting is changed. In this case, change this setting to [Standard format].
[Wired Setup]: Select this when you connect to a broadband router using a LAN cable. When you select this setting, the wireless LAN function of the system is disabled automatically. [Wireless Setup]: Select this when you use the built-in Wi-Fi function of the system to connect to a wireless network. Tip For further details, visit the following website and check the FAQ: http://www.sony.
[Resetting] [Reset to Factory Default Settings] You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset. [Initialize Personal Information] You can erase your personal information stored on the system. Note If you dispose, transfer or resell this system, please delete all Personal Information for security purposes. Please take appropriate measures such as logging out after using a network service.
Options Menu List Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation. Explanation [A/V SYNC] Adjusts the time gap between picture and sound. Sound output can be delayed (page 29). [Sound Field] Changes the sound field setting (page 27). [Night] Selects the night mode (page 28). [Voice] Selects the voice mode (page 28). [Input Skip Setting] Skips unused inputs when selecting a function by pressing INPUT +/– (page 57).
The system turns off when the TV is turned off. Troubleshooting Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Be sure to bring both your unit and subwoofer, even if it seems as though only one has a problem, when you request to repair. Power The system does not power up.
bandwidth Digital Content Protection) compliant. In this case, check the specifications of the connected device. Disconnect the HDMI cable, then connect it again. Make sure that the cable is firmly inserted. 3D content from the HDMI IN 1/2/3 jack do not appear on the TV screen. Depending on the TV or video device, 3D content may not appear. Check the supported HDMI video format (page 73). 4K content from the HDMI IN 1/2/3 jack do not appear on the TV screen.
Increase the volume on the system or cancel muting. If sound of a cable TV (CATV) box/ satellite tuner connected to the TV is not output, connect the device to a HDMI IN jack of the system and switch input of the system to the input for the connected device (HDMI IN 1/2/3) (refer to the supplied Startup Guide). Depending on the order in which you connect the TV and the system, the system may be muted and “MUTING” is displayed on the front panel display of the system.
To play multi-channel audio, check the digital audio output setting on the device connected to the system. For details, refer to the operating instructions supplied with the connected device. USB Device Connection Make sure this system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this system. You cannot use the NFC function.
Headphones or Speaker Connection via BLUETOOTH BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the unit is lit (page 8). Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled. Bring this system and the BLUETOOTH device closer together. Pair this system and the BLUETOOTH device again. You may need to cancel the pairing with this system using your BLUETOOTH device first. Pairing information may be deleted.
The wireless router you want is not shown in the wireless network list. Press BACK to return to the previous screen, and try [Wireless Setup] again (page 22). If the wireless router you want is still not detected, select [New connection registration] from the network list, then select [Manual registration] to input a network name (SSID) manually. Subwoofer No sound is heard from the subwoofer. If the power indicator on the subwoofer does not light, try the following.
If there is an obstacle between the unit and the subwoofer, move or remove it. Locate the unit and the subwoofer as close as possible. Switch the wireless LAN frequency of any nearby Wi-Fi router or PC to 5 GHz range. Switch the network connection of the TV or Blu-ray Disc Player from wireless to wired. Wireless Surround No sound or only very low-level sound is heard from the wireless speaker. Depending on the input signal, a surround effect with presence may not be obtained.
system. For details, refer to the operating instructions of your device. The type and number of devices that can be controlled by the Control for HDMI function is restricted by the HDMI CEC standard as follows: – Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices – Playback devices (Blu-ray Disc Player, DVD player, etc.
Resetting the System If the system still does not operate properly, reset the system as follows. 1 2 3 4 5 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen. Select [Resetting] - [Reset to Factory Default Settings]. Select the menu item you want to reset. Select [Start]. To cancel resetting Select [Cancel] in step 5. Note By resetting, the link with the subwoofer may be lost.
protection technology that is used to protect content such as 4K movies. Additional Information Specifications Bar Speaker (SA-NT5) Amplifier section Inputs HDMI IN 1/2/3* ANALOG IN TV IN (OPTICAL) Outputs HDMI OUT (TV (ARC))* * HDMI IN 1/2/3 and HDMI OUT (TV (ARC)) jacks support HDCP 2.2 protocol. HDCP 2.
2) 3) 4) 5) sensitivity, the operating system, software applications, etc. BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. Codec: Audio signal compression and conversion format Abbreviation for Subband Codec Abbreviation for Advanced Audio Coding Front L/Front R speaker block section Speaker system 2-way 3 speaker system, Acoustic suspension Speaker Woofer: 60 mm (2 3/8 in.) cone type Tweeter: 14 mm (9/16 in.
Playable Types of Files Music Extension MP3 (MPEG-1 Audio Layer III)1) .mp3 AAC/HE-AAC1),2) .m4a, .aac3), .mp4, .3gp WMA9 Standard2) .wma WMA10 Pro7) .wma LPCM1) .wav FLAC2) .flac, .fla Dolby Digital1),3) .ac3 DSF2) .dsf DSDIFF2),4) .dff AIFF2) .aiff, .aif ALAC2) .m4a Vorbis .ogg Monkey’s Audio .ape Photo Format Extension JPEG .jpeg, .jpg, .jpe PNG5) .png GIF5) .gif BMP3),6) .bmp 1) 2) 3) 4) 5) 6) 7) The system can play “.mka” files.
Supported Input Audio Formats Audio formats supported by this system are as follows. Format Function “HDMI1” “HDMI2” “HDMI3” “TV” (DIGITAL IN) LPCM 2ch LPCM 5.1ch – LPCM 7.1ch – Dolby Digital Dolby TrueHD, Dolby Digital Plus – DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.1 DTS96/24 DTS-HD High Resolution Audio – DTS-HD Master Audio – DTS-HD LBR – DSD – : Supported format. –: Unsupported format.
Supported Input Video Formats Video formats supported by this system are as follows. HDMI cable Format 4096/3840 × 2160p 4K Frame Rate 50/59.94/ 60 Hz Color Space Premium High Speed High Speed HDMI Cable HDMI Cable with Ethernet with Ethernet RGB YCbCr444/ 422 YCbCr420 HDMI Signal Format Enhanced Normal – – 23.98/24/25/ 29.97/30 Hz 23.98/24/25/ 30/50/59.94/ 60 Hz 1920 × 1080i 50/59.94/ 60 Hz 1280 × 720p 23.98/24/ 29.97/30/50/ 59.94/60 Hz 720 × 480p 59.
On BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
COPYRIGHT END USER LICENSE AGREEMENT IMPORTANT: SOFTWARE LICENSE The SOFTWARE is licensed, not sold. The SOFTWARE is protected by copyright and other intellectual property laws and international treaties. GRANT OF LICENSE SONY grants you a limited license to use the SOFTWARE solely in connection with your compatible device (“DEVICE”) and only for your individual, noncommercial use.
The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY). SONY and such suppliers do not warrant that the SOFTWARE, network services, contents or other products will continue to be available, or will operate without interruption or modification.
control, direct life support machines, or weapons systems, in which the failure of the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage (“HIGH RISK ACTIVITIES”). SONY, each of the THIRDPARTY SUPPLIERS, and each of their respective affiliates specifically disclaim any express or implied warranty, duty or condition of fitness for HIGH RISK ACTIVITIES.
OR LIMITATION MAY NOT APPLY TO YOU. GOVERNING LAW AND JURISDICTION AUTOMATIC UPDATE FEATURE The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this EULA. This EULA shall be governed by the laws of Japan, without regards to conflict of laws provisions. Any dispute arising out of this EULA shall be subject to the exclusive venue of the Tokyo District Court in Japan, and the parties hereby consent to the venue and jurisdiction of such courts.
SOLE DISCRETION BY POSTING NOTICE ON A SONY DESIGNATED WEB SITE, BY EMAIL NOTIFICATION TO AN EMAIL ADDRESS PROVIDED BY YOU, BY PROVIDING NOTICE AS PART OF THE PROCESS IN WHICH YOU OBTAIN UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE. If you do not agree to the amendment, you should promptly contact SONY for instructions. Your continued use of the SOFTWARE after the effective date of any such notice shall be deemed your agreement to be bound by such amendment.
• Do not place metal objects other than a TV around the system. Wireless functions may be unstable. • If the system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the system away from the TV, VCR, or tape deck. • Use caution when placing the system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
Copyrights and Trademarks This system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. **For DTS patents, see http:// patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
LDAC™ and LDAC logo are trademarks of Sony Corporation. LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a Bluetooth connection.
Index Numerics 24p Output 52 4K Output 52 A Attenuation settings - Analog 53 Audio DRC 53 Audio Output 53 Audio Return Channel 55 Audio Settings 53 Auto Display 56 Auto Home Network Access Permission 57 Auto Standby 56 Auto Update 56 Auto Update Settings 56 B Bluetooth Codec - AAC 54 Bluetooth Codec - LDAC 54 Bluetooth Mode 53 Bluetooth Settings 53 Bluetooth Standby 54 C Connection Server Settings 57 Control for HDMI 55 HDMI Signal Format 55 Home Network Access Control 57 I Initialize Personal Informat
Sound field 59 Standby Through 55 System Information 56 System Settings 55 T Time Zone 56 TV Type 52 U Update 52 V Video Direct 53 W Wireless Multi Room 39 Wireless Playback Quality 54 Wireless Subwoofer Connection 55 Wireless Surround 40 84US
Sound Bar The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony.com/soundbarsupport Le logiciel de ce système est susceptible d’être mis à jour. Pour en savoir plus sur les éventuelles mises à jour disponibles, visitez l’URL suivante. http://www.sony.com/soundbarsupport El software de este sistema podria actualizarse en el futuro.
2 Supplied accessories 4-585-894-13(1) Connecting with a TV Sound Bar Startup Guide Remote control (1) R03 (size AAA) batteries (2) Is the HDMI input jack on your TV labeled “ARC” ? HDMI cable (4K 60p 18Gbps compatible) (1) NO YES Wall mounting brackets (2) Screws (2) Grille frame support hook (2) Operating Instructions (1) Grille frame (1) Startup guide (this document) (1) About the operation method of the system HDMI cable (4K 60p 18Gbps compatible) (supplied) Connect this system and the T
5 8 Turning on the TV Listening to the sound INPUT +/– Power Home menu j//V/p HOME SW Ç +/– 6 Turning on the system ̽ ̾/̿ Front Panel Power indicator (green) Ç +/– Listening to the audio of the TV To enjoy an input device other than the TV ̽ Select the desired program using the remote control of the TV. ̽ Press HOME. The screen switches to the television broadcast screen and the TV audio is output from the system.
ES Cómo fijar una estructura ͦ 4-591-367-02(1) JP 壁掛け時にグリルを取り付ける ͦ Inserte el gancho de soporte de グリル脱落防止用フックを取り付けて、 グリルの落下を防ぎます。 estructura de rejilla en el gancho de la estructura de rejilla, a continuación, levántelo. ͧ Fije la estructura de rejilla al altavoz de barra. ͦ グリル脱落防止用フックをグリルの ツメにかけて、 上に押し込む。 ͧ グリルをスピーカーに取り付ける。 ͧ de rejilla al realizar el montaje en pared Fije el gancho de soporte de estructura de rejilla a la estructura de rejilla para evitar que esta se caiga.
ͦ ͧ RU Крепление сетчатой BP Fixar o quadro da grade рамки при настенном монтаже Прикрепите опорный крюк сетчатой рамки к сетчатой рамке, чтобы не допустить ее падения. quando montar em uma parede Fixe o gancho de apoio do quadro da grade ao quadro da grade para impedir que o mesmo caia. ͦ Вставьте опорный крюк ͦ Insira o gancho de apoio do сетчатой рамки в крюк на сетчатой рамке, затем поднимите. ͧ Прикрепите сетчатую рамку к звуковой панели.
Français Pour utiliser la fonction Wireless Surround, il est nécessaire de procéder à l’installation d’une mise à jour du logiciel qui sera disponible en juin prochain* Procédez à la mise à jour de chacun des logiciels de cet appareil, des enceintes sans fil (vendues séparément, deux enceintes de même modèle sont requises) et de SongPal en installant les versions suivantes. - Cet appareil : M34.R.2000 ou ultérieure - Enceintes sans fil : 2.00 ou ultérieure - SongPal : 4.
Italiano Português Per utilizzare la funzione Wireless Surround è necessario un aggiornamento software programmato non prima di giugno 2016* Para usar a função Wireless Surround, é necessária uma atualização de software que está agendada para a partir de junho de 2016* Aggiornare ogni software di questa unità, diffusori wireless (venduti separatamente, sono necessari due set dello stesso modello), e SongPal alle seguenti versioni. - Questa unità: M34.R.2000 o versioni successive - Diffusori wireless: 2.
SONY.: I§U.Itff1il [I How to set up the "Song Pal" app "Song Pal" is a free dedicated app for smartphones that allows you to enjoy the music content on your system or smartphone, by using a wireless BLUETOOTH® connection. Some features of the app are as follows. • Choose music and control playback on the various music sources in combination with the functions of your audio system and a "SongPal"-ready smartphone. • Operation of sound settings, power control and other features is easy and intuitive.
SONY • Thank you for purchasing this Sony product. Proper registration will enable us to send you periodic mailings about new products and other important announcements. Registering your product will also allow us to contact you in the unlikely event that it will need adjustment or modification. Please take the time to register your new product at our website: http://www.sony.com/productregistration • • • • You will find the product serial number on the main unit and the carton box.
SO :NY: Garantie protegeant les consommateurs Sony du Canada ltee (ci-apres designee Sony), sous reserve des modalites et conditions indiquees aux presentes, garantit le present produit contre tout defaut de fabrication ou de materiaux pour Ia periode de garantie specifiee.
SON~ 111111111111111111111111111111111111111111111111111111111111 Consumer Warranty Sony of Canada Ltd. (hereinafter referred to as "Sony") hereby warrants, subject to the terms and conditions herein set forth, this product against defects in material and workmanship during the specified warranty period.
111111111111~1111111111111111111111111111111111111111111111 4-557-172-04 ' General Stereo/Hifi Components(fape Decks CD Players/Mini Disc Players/Audio Systems SON"% . I Hifi Audio I LIMITED WARRANT V(u.s.onlv)· Sony Electronics Inc. ("Sony") warrants this product against defects in material or workmanship for the time periods and as set forth below when purchased directly from Sony or a Sony Retailer. Pursuant to this Limited .