Home Theatre System Operating Instructions

18
GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB03CON_HT-SS500-CEL.fm
masterpage: Left
model name1[HT-SS500]
2-682-472-11
(3)
5: Preparing the receiver
and the remote
Connect the AC power cord to a wall outlet.
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO and SYSTEM
menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.
Connecting the AC power cord
SUB
WOOFER
AC power cord
To the wall outlet
Performing initial setup
operations
INPUT SELECTOR
MASTER
VOLUME
?/1
PRESET
TUNING
SOUND FIELD MUTING
1,2
GB01COV_HT-SS500-CEL.book Page 18 Thursday, June 1, 2006 10:15 AM