Quick Start Guide
© 2021 Sony Corporation Printed in Malaysia
4
Connect the control box, then the speakers to the AC outlet (mains)
ARC/
eARC
HDMI 出力 HDMI IN
12V
S-CENTER 出力
AC adaptor (supplied)
AC power cord (mains lead) (supplied)
Connect the AC adaptor (supplied) to the control box, and then to the AC outlet (mains).
Connect the AC power cords (supplied) to the speakers and then to the AC outlets.
5
Set up the remote control
6
Turn on the control box, then the TV
Speaker connection check
Next
Speaker connection successful.
PLEASE WAIT SETUP
Power ON
Speaker connection check
Press the (power) button on the remote control of the speaker system to turn on the control box.
The speaker system turns on and [SETUP] appears in the front panel display of the control box.
Turn on the TV.
If the [Speaker connection check] screen does not appear on the TV screen, change the TV input setting to the input that the speaker system is connected.
Check that the connection between the control box and 4 speakers is completed on the TV screen.
The control box and speakers are connected automatically.
The sound for connection completion is output after the check marks appear on all the speakers.
The power indicator of the speaker lights in green when connecting to the control box.
Note
• To use the speaker system, point the remote control at the front of the control box.
• Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] may appear on the front panel display of the control box. If this happens, turn off all
devices, and then turn on the TV first, then the speaker system.
• If you connect the TV center speaker mode cable (supplied) to the control box and your TV, follow the instructions on the TV screen for the settings after Step 6.
7
Perform Initial Settings
Sound Field Optimization
Later
Optimize the surround sound for your environment.
Optimization takes about a minute. A loud sound
may come from your speakers during optimization.
Do not make loud noises, walk or stand in front of
the speakers during optimization.
Start
Easy Network Setup - Start
Connect this unit to the Internet to:
- Use your mobile device to play streaming music on the unit.
- Install software updates to keep the latest functions available.
You can do this later from [Easy Setup] > [Easy Network Setup].
Next Later
Language
Select your language.
Français (France)
English
Français (Canada)
Español
Deutsch
Language
////
Sound Field Optimization Easy Network Setup - Start
Press /// and to select an item by following the on-screen instructions.
When the Sound Field Optimization is complete and you have finished listening to the demo music, press [Next] to continue network settings.
Once [Setup is complete.] appears, select [Finish].
Note
• During the Sound Field Optimization, a measurement sound is output for about 1 minute.
• The speaker system does not output sound until the connection between the control box and 4 speakers is completed.
8
Listen to sound
TV input switch
TV
HDMI
Listen to TV Audio
Select the desired input to the TV using the TV remote control.
The screen switches to the selected input screen and TV audio is output from the speaker system.
If [TV] does not appear in the front panel display of the control box, press TV on the remote control of the speaker system to select the TV input. [TV] appears in the front panel display of
the control box.
Listen to audio of another device connected to the HDMI IN jack on the control box
Turn on the connected device. Then use the TV’s remote control to switch the TV’s input to HDMI input to which the speaker system is connected.
Press HDMI on the remote control of the speaker system to switch to HDMI input.
[HDMI] appears in the front panel display of the control box and the audio of the connected device is output from the speaker system.
How to use the speaker system / Troubleshooting
Home Theatre System
Operating Instructions (booklet)
Describes basic usage such as installation/connection
and playback of connected devices.
Help Guide (Web instruction manual)
Describes all the usage such as the network function
and the detailed setting method, including the contents
of the Operating Instructions.
For troubleshooting when the speaker system does not
operate correctly, see “Troubleshooting” in the Operating
Instructions or Help Guide.
https://rd1.sony.net/help/ht/a9/h_uc/