Operating Guide

112
Cannot record still images on
Memory Stick.
• You cannot record still images in the
following cases:
– When the shutter speed is 1/60 or less
– While using [FADER]
– While using [SMTH SLW REC]
– While checking or executing shot
transition
– While [PROG. SCAN] is set to [24]
or [30].
x PictBridge compliant printer
Check the connected device.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
Error. Cancel the task.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
x Others
Change to correct tape format.
• The pictures cannot be played back
because of an incompatible format.
No output image in “VCR HDV/DV”.
Change format.
• Stop playback or signal input, or
change [VCR HDV/DV] setting
(p. 75).
x Dirty video head. Use a
cleaning cassette. (p. 124)
Could not synchronize TC.
• Make sure that a tape is in the
connected camcorder (p. 79).
Warning indicators and messages (Continued)