User's Manual

51
<VR ASSIGN>
11
FRONT VR MIC GAIN1, MIC GAIN2, MIC
GAIN1+2, INTERCOM,
EARPHONE, OFF
Assigns a function to the INTERCOM LEVEL knob at the
front.
When connected to a CCU, INTERCOM is displayed (not
configurable)
REAR VR MIC GAIN1, MIC GAIN2, MIC
GAIN1+2, INTERCOM
,
EARPHONE, OFF
Assigns a function to the INTERCOM knob at the rear.
When connected to a CCU, INTERCOM is displayed (not
configurable)
<HEADSET MIC>
12 (U12)
INTERCOM DYNAMIC
, CARBON,
MANUAL
Displayed when a camera adaptor is not connected.
LEVEL –60dB
, –40dB, –20dB ( ) display: When set to DYNAMIC or CARBON (not
configurable)
–6dB, 0dB
, 6dB
POWER ON, OFF
( ) display: When set to DYNAMIC or CARBON (not
configurable)
UNBAL ON
, OFF ( ) display: When set to CARBON (not configurable)
SIDE TONE MU, 1 to 99 50
INTERCOM1
(CAM)
DYNAMIC, CARBON,
MANUAL
Displayed only when a camera adaptor is connected.
LEVEL –60dB
, –40dB, –20dB ( ) display: When set to DYNAMIC or CARBON (not
configurable)
–6dB, 0dB
, 6dB
POWER ON, OFF
( ) display: When set to DYNAMIC or CARBON (not
configurable)
UNBAL ON
, OFF ( ) display: When set to CARBON (not configurable)
SIDE TONE MU, 1 to 99 50
INTERCOM2
(CA)
DYNAMIC, CARBON,
MANUAL
Displayed only when a camera adaptor is connected.
LEVEL –60dB
, –40dB, –20dB ( ) display: When set to DYNAMIC or CARBON (not
configurable)
–6dB, 0dB
, 6dB
POWER ON, OFF
( ) display: When set to DYNAMIC or CARBON (not
configurable)
UNBAL ON
, OFF ( ) display: When set to CARBON (not configurable)
SIDE TONE MU, 1 to 99 50
<INTERCOM>
13 (U13)
INTERCOM
RECEIVE SELECT
SEPARATE, MIX
INTERCOM RIGHT, LEFT
, BOTH, --- When PANEL TYPE is set to UCJ
0 to 99
ENG RIGHT, LEFT, BOTH, --- When PANEL TYPE is set to CE
0 to 99
PROD RIGHT, LEFT, BOTH, --- When PANEL TYPE is set to CE
0 to 99
PGM/SDI1 RIGHT, LEFT, BOTH, --- PGM when connected with a CCU, and SDI1 in standalone
operation mode for input audio channel 1 on SDI I/O connector
0 to 99
SDI2 RIGHT, LEFT, BOTH, --- Displayed in standalone operation mode
0 to 99
SIDE TONE MU, 1 to 99 50
PANEL TYPE UCJ, CE Restart required after setting
REAR ENC SW PGM1/2
, PGM2, ON/OFF
REAR VR INTERCOM
, INTERCOM+PGM
OPERATION
Page name
Page No.
Item Setting Description / Remarks