User's Manual

63
DIAGNOSIS Menu
This menu is only for viewing and no setting is made using this
menu.
<REFERENCE>
F03
STORE FILE Execute using ENTER.
Write the current settings of the reference file to internal memory.
STANDARD Execute using ENTER.
Read the reference file stored in internal memory.
ALL PRESET Execute using ENTER.
Return the reference file stored in internal memory to the default
values.
READ
(USBtCAM)
Execute using ENTER.
Read a reference file from a USB flash drive.
WRITE
(CAMtUSB)
Execute using ENTER.
Write the current settings of the reference file to a USB flash
drive.
FILE ID Enter a comment of up to 14 characters in reference file to be
written to a USB drive.
See “To specify a character string” (page 36).
CAM CODE Camera code Display only
DATE Date Display only
<LENS FILE>
F04 (U11)
STORE FILE Execute using ENTER. Write the current settings of the lens file to internal memory.
No. 1
to 17 1 to 16: When using a non-serial lens
17: When using a serial lens
NAME Lens file name Configurable only when using a non-serial lens
F NO F1.0 to F3.4 F1.7
Configurable only when using a non-serial lens
CENTER MARKER Sets and stores the center marker position.
H POS –20 to 20 0
Increasing the value moves it to the right.
V POS –20 to 20 0
Increasing the value moves it downwards.
STORE Execute using ENTER. Save the center maker position settings.
<FILE CLEAR>
F05
PRESET
OPERATOR
Execute using ENTER.
REFERENCE (ALL) Execute using ENTER.
10 SEC CLEAR ON, OFF
Turn the function for clearing an item selected in a menu on/off.
See “To return a menu item to the standard value” (page 37).
FILE
Page name
Page No.
Item Setting Description / Remarks
DIAGNOSIS
Page name
Page No.
Item Setting Description / Remarks
<TRANSMISSION
CONDITION>
D01
OPTICAL LEVEL
CCUtCAM GREEN, YELLOW, RED, NG, NO
SIGNAL
Displayed only when a CCU is connected.
CAMtCCU GREEN, YELLOW, RED, NG, NO
SIGNAL
DC INPUT LEVEL GREEN, YELLOW, RED, NOT
DETECT
<BOARD STATUS>
D02
OHB OK, NG
DPR OK, NG
SY OK, NG
IF OK, NG