IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
16
GB
Recording
mode
STLP
*5
SP
*6
Recording Approx. 16 hr.
30 min.
Approx. 17 hr.
Playback
*2
through
speaker
Approx. 17 hr.
30 min.
Approx. 19 hr.
Playback
using ear
receiver
Approx. 24 hr.
30 min.
Approx. 27 hr.
30 min.
Recording
mode
LP
*7
MP3 (128 kbps/
44.1 kHz)
Recording Approx. 19 hr. –
Playback
*2
through
speaker
Approx. 19 hr.
30 min.
Approx. 17 hr.
30 min.
Playback
using ear
receiver
Approx. 28 hr.
30 min.
Approx. 24 hr.
(hr : hours/min. : minutes)
*1
The battery life may shorten depending on
how you operate the IC recorder
*2
When playing back through the internal
speaker with the volume level set to VOL12
*3
STHQ : Stereo high quality recording mode
*4
ST : Stereo standard recording mode
*5
STLP : Stereo long play recording mode
*6
SP : Standard play recording mode
*7
LP : Long play recording mode
Note on the “UPDATING
DATABASE…” message
The IC recorder is accessing data while
“UPDATING DATABASE…“ appears in
the display window or the operation
indicator ashes in orange. While
accessing, do not remove the batteries or
USB AC adaptor (not supplied). Doing so
may damage the data.
Note
If the IC recorder is required to process
excessive amount of data, “UPDATING
DATABASE…” may be displayed for an
extended period of time. This is not a
malfunction of the IC recorder.
Wait until the message disappears before
starting operation.