IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
21
GB
Basic Operations
Basic Operations
Recording Messages
2
3
1
1
1
Built-in microphones
DIRECTNL
Operation indicator
(headphone) jack
This section explains how to record using
the AUTO_AGC* setting, to which the IC
recorder is preset at the factory.
* Auto Gain Control
1 Select a folder.
Press /MENU to display the folder
selection window.
Press or to select the
folder in which you want to record
messages, and then press .
2 Start recording.
Press (record).
The operation indicator lights in red
and the window changes to the
recording display (page 11).
You do not need to press and hold
(record) while recording. The
new message will be automatically
recorded after the last recorded
message.
Speak into the built-in microphone.