IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
25
GB
Various Recording Modes
Various Recording Modes
Manual Recording
Mode
3, 6
7
1, 2
6
Operation
indicator
1, 2, 4
1, 2
1 Select the manual recording mode
in the menu.
Select “MANUAL” by pressing or
in the “REC LEVEL” menu, and then
press .
2 Select a folder.
Press /MENU to display the folder
selection window.
Press or to select the
folder in which you want to record
messages and then press .
3 Press and hold (record).
The IC recorder enters the record
standby mode. When you speak into
the microphone, the level meter in the
display window moves.
4 Adjust the recording level.
Adjust the maximum level of the
sound source to about –12 dB on the
recording level meter.
If “OVER” is displayed, press or
and adjust the recording level
down so that “OVER” is not displayed,
to prevent sound distortion.
OVER indicator
Level meter