IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
27
GB
Various Recording Modes
1 Press or to set “VOR” to
“ON” in the menu, and then press
.
“VOR” appears in the display window.
2 Press (record).
The recording starts when the IC
recorder detects sound. The recording
pauses when no sound is detected
and “VOR” and “” ash. When the
IC recorder detects sound again, the
recording starts again.
To cancel the VOR function
Set “VOR” to “OFF” in the menu.
Note
The VOR function is affected by the sound
around you. Set “MIC SENS” in the menu
according to the recording conditions. If
recording is not satisfactory after you have
changed the microphone sensitivity, or for an
important recording, set “VOR” to “OFF” in the
menu.
Adding a Recording to
a Previously Recorded
Message
2, 3
4
1
Operation
indicator
1