IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
38
GB
Adjusting the playback
speed – DPC (the Digital
Pitch Control function)
When you slide the DPC switch to “ON,”
you can adjust the playback speed
between +200% and –75% of normal
speed in the menu.
The message is played back in natural
tones thanks to the digital processing
function.
1 Slide the DPC switch to “ON.”
2 Adjust the playback speed in the
“DPC” menu (page 51).
To resume normal playback
Slide the DPC switch to “OFF.”
Playing Back a Specied
Section Repeatedly – A-B
Repeat
1 During playback, press (repeat)
A-B/ (priority) briey to specify
the starting point A.
“A-B B?” is displayed.
2 Press (repeat) A-B/ (priority)
briey again to specify the nishing
point B.
“ A-B” is displayed and the specied
section is played back repeatedly.
To resume normal playback
Press .
To change the segment specied
for A-B repeat playback
During the A-B Repeat playback, press
A-B/ (priority) again, and start from step
1, above.