IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
46
GB
Moving Message to a
Dierent Folder
Note
When “ ” is displayed for the folder indicator,
you cannot move a message (page 66).
1 Select the message you want to
move.
2 Select “MOVE” in the menu and
press .
3 Press or to select the
folder that you want to move the
message into, and then press .
“EXECUTING…” is displayed and the
message is moved to the destination
folder.
When you move a message to another
folder, the original message in the
previous folder will be deleted.
To cancel moving the message
Press (stop) before step 3.
Adding Priority
Mark(s) – the Priority
Mark Function
You can add priority marks ( ) to
important messages. There are four
levels, “ ” (the most important),
“ ,” “ ,” and no priority mark. You can
add priority marks both in the stop
mode, and in the playback mode.
You cannot add priority marks to an
MP3 le.
1 Select the message you want to
mark.
2 Press and hold A-B/ (priority).
The “ ” indicator will ash.
3 Press and hold A-B/ (priority)
again to add the priority mark.
Each time you press and hold
A-B/ , the priority mark(s) will
change as follows:
No mark