IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
53
GB
Utilizing the Menu Function
Menu items Settings (*: Initial setting)
ADD/OVER You can add a recording to a previously recorded message or an
overwrite recording during playback.
OFF*:
You cannot add or overwrite a recording.
ADD:
You can add a recording.
OVER:
You can overwrite a recording.
BEEP Sets whether a beep will be heard or not.
ON*:
A beep will sound to indicate that an operation has been accepted.
OFF:
No beep sound will be heard.
LED Turns the operation indicator on or off during operation.
ON*:
During recording or playback, the operation indicator lights or
ashes.
OFF:
The operation indicator does not light or ash, even during
operation.
Note
When the IC recorder is connected to a computer using the USB cable, the
operation indicator lights or flashes even if “LED” is set to “OFF.”