IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
57
GB
Utilizing the Menu Function
Menu items Settings (*: Initial setting)
USB CHARGE Sets whether batteries will be charged using a USB connection or
not.
ON*:
The batteries will be charged.
OFF:
The batteries will not be charged.
Note
If you use a USB AC adaptor (not supplied) to connect the IC recorder to the
AC outlet, you can charge batteries regardless this setting.
V-UP LEVEL When the VOICE UP switch is set to “ON,” set the sound level to be
amplified so that the inaudible low-level part will become more
audible.
MAX*:
You can adjust the VOICE UP level more eectively.
MID:
You can adjust the VOICE UP level less nely.