IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
82
GB
Using a USB AC
Adaptor (not
supplied)
To USB connector
USB cable (supplied)
You can charge the rechargeable
batteries by connecting the IC recorder
to an AC outlet using a USB AC adaptor
(not supplied).
You can charge the batteries while you
are using the IC recorder, so that it is
useful when you want to record for a
long time.
1 Connect the USB cable supplied
to the USB connector of the IC
recorder.
2 Connect a USB AC adaptor (not
supplied) to the USB cable.
3 Connect the USB AC adaptor to an
AC outlet.
While the batteries are charging,
“CONNECTING” and the battery
indicator are displayed in an
animation.
When the battery indicator indicates
“ ,” charging is completed. (Charging
time: approx. 4 hours*)
When you use the IC recorder for the
rst time, or after you have not used
the IC recorder for a certain time, it
is recommended that you charge
the batteries repeatedly until “ ” is
displayed.
If the battery indicator is not displayed,
charging has not been done properly.
Proceed from step 1 again.