IC Recorder Operating Instructions
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Additional Information
ICD-SX57/SX67/SX77 GB 2-894-352-12 (2)
85
GB
Additional Information
Speaker
Approx. 16 mm (21/32 in.) dia.
Power output
150 mW
Input/Output
Microphone jack (minijack, stereo)
input for plug in power, minimum input
level 0.6 mV, 3 kilohms or lower impedance
microphone
Headphone jack (minijack, stereo)
output for 8 - 300 ohms headphones
USB connector
Playback speed control
+200% to –75% (DPC)
Power requirements
Two NH-AAA rechargeable batteries: 2.4 V DC
Two LR03 (size AAA) alkaline batteries: 3.0 V DC
Operating temperature
5˚C - 35˚C (41˚F - 95˚F)
Dimensions (w/h/d) (not incl.
projecting parts and controls)(JEITA)*
30.8 × 119.3 × 14.9 mm (1 1/4 × 4 3/4 × 19/32
in.)
Mass (incl. batteries)(JEITA)*
70 g (2.47 oz)
* Measured value by the standard of JEITA
(Japan Electronics and Information
Technology Industries Association)
Supplied accessories
See page 7.
Optional accessories
Active speaker SRS-T88, SRS-T80/Electret
condenser microphone ECM-CS10, ECM-CZ10,
ECM-TL1/Audio connecting cable RK-G136HG,
RK-G139HG (excluding Europe)/USB AC
adaptor AC-U50A.
Your dealer may not handle some of the
above listed optional accessories. Please
ask the dealer for detailed information.
Design and specications are subject to
change without notice.