Owner's manual
Table Of Contents
- Checking the contents of the package
- Getting Started
- Basic Operations
- Various Recording Modes
- Manual Recording Mode
- Starting to Record Automattically in Response to Sound – the VOR Function
- Adding a Recording to a Previously Recorded Message
- Adding an Overwrite Recording during Playback
- Dividing a Message into Two during Recording
- Recording with an External Microphone
- Recording from Other Equipment
- Playback/Erasing
- Editing Messages
- Utilizing the Menu Function
- Using the IC Recorder with Your Computer
- Troubleshooting
- Addtional Information
ICD-SX57 GB 2-894-353-52 (2)
40
GB
When the set date and time
comes
At the set time, the alarm will sound
for about 10 seconds and the selected
message will be played back.
When the playback ends, the IC recorder
will stop automatically at the beginning
of that message.
To listen to the same message
again
Press , and the same will be played
back from the beginning.
To stop the alarm before the
playback starts
Press while the alarm sound is heard.
You can stop the alarm playback even
when the HOLD function is activated.
To change the alarm setting
1 Select “ALARM” – “LIST” in the menu
and then press .
The alarm list is displayed.
2 Press or to select the item
you want to change, and then press
.
3 Press or to select “EDIT,”
and then press .
4 Select “DATE,” a day of the week, or
“DAILY,” and then press .
5 Set the date and time and press
.
“EXECUTING…” and then your settings
are displayed.