Operating Instructions

ILCE-9

d-830-100-11 (1)

C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd

2019/02/19 10:01

114

Zebra Setting

Sets a zebra pattern, which appears over part of an image if the

brightness level of that part meets the IRE level that you have set. Use this

zebra pattern as a guide to adjust the brightness.

MENU  (Camera Settings 2)  [Zebra Setting]  desired

setting item.

Zebra Display: Sets whether to display the zebra pattern.

Zebra Level: Adjusts the brightness level of the zebra pattern.

Hint

• You can register values to check the correct exposure or overexposure as well

as the brightness level for [Zebra Level]. The settings for correct exposure

confirmation and overexposure confirmation are registered to [Custom 1] and

[Custom 2] respectively in the default settings.

• To check the correct exposure, set a standard value and the range for the

brightness level. The zebra pattern will appear on areas that fall within the

range you set.

• To check the overexposure, set a minimum value for the brightness level. The

zebra pattern will appear over areas with a brightness level equal to or higher

than the value you set.

Note

• The zebra pattern is not displayed on devices connected via HDMI.