Operating Instructions

ILCE-9

d-830-100-11 (1)

C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd

2019/02/19 10:01

138

Note

• The default setting depends on the shooting mode.

• Some [Flash Mode] settings are not available, depending on the shooting

mode.

Flash Comp.

Adjusts the amount of flash light in a range of –3.0EV to +3.0EV.

Flash compensation changes the amount of flash light only. Exposure

compensation changes the amount of flash light along with the change of

the shutter speed and aperture.

MENU  (Camera Settings 1)  [Flash Comp.]  desired

setting.

• Selecting higher values (+ side) makes the flash level higher, and lower

values (- side) makes the flash level lower.

Note

• [Flash Comp.] does not work when the shooting mode is set to the following

modes:

– [Intelligent Auto]

• The higher flash effect (+ side) may not be visible due to the limited amount

of flash light available, if the subject is outside the maximum range of the

flash. If the subject is very close, the lower flash effect (- side) may not be

visible.

• If you attach an ND filter to the lens or attach a diffuser or a color filter to the

flash, the appropriate exposure may not be achieved and images may turn

out dark. In this case, adjust [Flash Comp.] to the desired value.