User Manual
Table Of Contents
- Learning more about the camera (“Help Guide”)
- Viewing the Guide
- Checking the supplied items
- Identifying parts
- Inserting the battery pack
- Charging the battery pack
- Attaching/removing the lens
- Inserting a memory card (sold separately)
- Setting the clock
- Shooting still images/movies
- Viewing images
- Introduction of other functions
- Features of PlayMemories Home
- Adding functions to the camera
- Number of still images and recordable time of movies
- Notes on using the camera
- Specifications
GB
19
x
Memory cards that can be used
• In this manual, the products in the table are collectively referred to as follows:
A: Memory Stick PRO Duo media
B: SD card
x
To remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
• Never remove the memory card/battery pack when the access lamp (page 11) is lit.
This may cause damage to data in the memory card.
Inserting a memory card (sold separately)
1
Open the cover.
2
Insert the memory card (sold separately).
• With the notched corner facing as illustrated, insert the memory card
until it clicks into place.
3
Close the cover.
Memory card For still images For movies
A
Memory Stick XC-HG Duo™
Memory Stick PRO Duo™ (Mark2 only)
Memory Stick PRO-HG Duo™
B
SD memory card (Class 4 or faster)
SDHC memory card (Class 4 or faster)
SDXC memory card (Class 4 or faster)
Notes
Ensure that the notched
corner is faced correctly.