Help Guide: Interchangeable Lens Digital Camera ILCE-6000 How to Use Before Use Names of parts Identifying parts [1] Identifying parts Lens E PZ 16–50 mm F3.5–5.6 OSS (supplied with ILCE-6000L/ILCE6000Y) [2] Identifying parts Lens E 55-210 mm F4.5-6.
About the [In-Camera Guide] [9] About the shooting advice [10] Confirming the operation method Confirming the operation method Using the control wheel [11] Using MENU items [12] Using the Fn (Function) button [13] Using the “Quick Navi” Shooting Shooting still images/movies Shooting still images [15] Shooting movies [16] Selecting a shooting mode List of mode dial functions [17] Intelligent Auto [18] Superior Auto [19] About Scene Recognition [20] The advantages of automatic shooting [21] Program Auto [2
Movie [30] Using shooting functions Using the zoom Zoom [31] The zoom features available with this product [32] Zoom Setting [33] About zoom scale [34] Using the flash Using flash Flash Mode [36] Flash Comp.
Focus-lock [49] Manual Focus [50] Direct manual focus (DMF) [51] MF Assist (still image) [52] Focus Magnifier [53] Focus Magnif. Time [54] Peaking Level [55] Peaking Color [56] Lock-on AF [57] Using Lock-on AF [58] Pre-AF (still image) [59] Eye-Start AF (still image) [60] AF/MF control [61] AF Illuminator (still image) [62] AF Micro Adj. [63] Disp. cont.
Dial/Wheel Ev Comp [79] Selecting a drive mode (Continuous shooting/Self-timer) Drive Mode [80] Cont. Shooting [81] Self-timer [82] Self-timer(Cont) [83] Cont. Bracket [84] Single Bracket [85] WB bracket [86] DRO Bracket [87] Bracket order [88] Selecting the ISO sensitivity ISO [89] Multi Frame NR [90] Correcting the brightness or contrast D-Range Opt.
Record Setting (movie) [98] Audio Recording [99] Wind Noise Reduct. [100] Auto Slow Shut. (movie) [101] MOVIE Button [102] Customizing the shooting functions for convenient use Memory [103] Function Menu Set.
Auto Review [126] Live View Display [127] FINDER/MONITOR [128] Release w/o Lens [129] e-Front Curtain Shut. [130] S. Auto Img. Extract. [131] Shading Comp. [132] Chro. Aber. Comp. [133] Distortion Comp. [134] Dial / Wheel Lock [135] Aperture Preview [136] Shot.
Specify Printing [146] Using viewing functions View Mode [147] Display Rotation [148] Slide Show [149] Rotate [150] Protect [151] 4K Still Image PB [152] Viewing images on a TV Viewing images on an HD TV [153] Viewing images on a “BRAVIA” Sync-compatible TV [154] Changing settings Setup menu Monitor Brightness [155] Viewfinder Bright. [156] Finder Color Temp. [157] Volume Settings [158] Audio signals [159] Upload Settings(Eye-Fi) [160] Tile Menu [161] Mode Dial Guide [162] Delete confirm.
HDMI Resolution [169] CTRL FOR HDMI [170] HDMI Info. Display [171] USB Connection [172] USB LUN Setting [173] Language [174] Date/Time Setup [175] Area Setting [176] Format [177] File Number [178] Select REC Folder [179] New Folder [180] Folder Name [181] Recover Image DB [182] Display Media Info.
Transferring images to a Smartphone Send to Smartphone [193] Sending images to an Android smartphone (NFC One-touch Sharing) [194] Transferring images to a computer Send to Computer [195] Transferring images to a TV View on TV [196] Changing the settings of Wi-Fi functions Airplane Mode [197] WPS Push [198] Access Point Set. [199] Edit Device Name [200] Disp MAC Address [201] SSID/PW Reset [202] Reset Network Set.
Launching the downloaded application [209] Managing the applications Uninstalling applications [210] Changing the order of applications [211] Confirming the account information of PlayMemories Camera Apps [212] Viewing on computers Recommended computer environment Recommended computer environment [213] Using the software PlayMemories Home [214] Installing PlayMemories Home [215] Software for Mac computers [216] “Image Data Converter” Installing “Image Data Converter” Accessing “Image Data Converter Guide
Creating a disc with a device other than a computer [228] Creating Blu-ray Discs [229] Precautions/This product Precautions Precautions [230] On the internal rechargeable battery [231] Notes on the battery pack [232] Charging the battery pack [233] Memory card [234] Cleaning this product On cleaning [235] Number of recordable still images and recordable time of movies Number of still images [236] Recordable time of movies [237] Using this product abroad Plug adaptor [238] On TV color systems [239] Othe
Trademarks Trademarks [247] Troubleshooting If you have problems If you have problems Troubleshooting [248] Troubleshooting Battery pack and power You cannot insert the battery pack into the product. [249] You cannot turn on the product. [250] The power turns off suddenly. [251] The remaining battery level indicator shows an incorrect level. [252] The charge lamp on the product flashes when charging the battery pack.
Fuzzy white circular spots appear on images shot using the flash. [262] The recording date and time are not displayed on the screen. [263] The date and time are recorded incorrectly. [264] The aperture value and/or shutter speed and/or metering indicator flashes. The image colors are not correct. [266] Noise appears in the image when you view the screen in a dark place. [267] The eyes of the subject come out red. [268] Dots appear and remain on the screen. [269] You cannot shoot images continuously.
You cannot use One-Touch connection (NFC). [289] Computers The computer does not recognize this product. [290] You cannot import images. [291] The image and sound are interrupted by noise when viewing a movie on a computer. [292] Images exported from a computer cannot be viewed on this product. [293] Memory cards Formatted the memory card by mistake. [294] Printing You cannot print images. [295] The color of the image is strange. [296] Images are printed with both edges cut off.
Situations this product has difficulty handling Situations this product has difficulty handling Situations this product has difficulty handling [306] [1] How to Use Before Use Names of parts Identifying parts When the lens is removed 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
*Do not cover this part during movie recording. ** Do 1. 2. 3. 4. 5. not touch this part directly. Multi Interface Shoe* Image sensor position mark Hook for shoulder strap Wi-Fi sensor (built-in) Flash Press the (Flash pop-up) button to use the flash. The flash does not pop up automatically. When not using the flash, press it back into the camera body. 6. 7. 8. 9. Mode dial Control dial Charge lamp Multi/Micro USB Terminal* Supports Micro USB compatible device. 10.
1. Eye sensor 2. Viewfinder 3. Eyepiece cup Not attached to the camera at the factory. It is recommended that you attach the eyepiece cup when you intend to use the viewfinder. Attaching/removing the eyepiece cup Match the bottom side of the eyepiece cup to the viewfinder, and attach it by pushing the top side of the eyepiece cup in. To remove the eyepiece cup, grasp it on the left and right sides and lift it up.
the viewfinder. If it is difficult to turn the diopter-adjustment dial, remove the eyepiece cup and then adjust the dial. 6. (Flash pop-up) button 7. MENU button 8. For shooting: AEL button For viewing: Playback zoom 9. MOVIE (Movie) button 10. For shooting: Fn (Function) button For viewing: (Send to Smartphone) button You can display the screen for [Send to Smartphone] by pressing the Smartphone) button. 11. Control wheel 12. C2 (Custom 2) button/ 13. (Playback) button 1.
cover as shown below. Make sure that the cord is not pinched when you close the cover. 3. Tripod socket hole Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. 4. 5. 6. 7. 8. 9. Speaker Access lamp Battery/memory card cover Memory card slot Battery insertion slot Battery eject lever [2] How to Use Before Use Names of parts Identifying parts Lens E PZ 16–50 mm F3.5–5.
[3] How to Use Before Use Names of parts Identifying parts Lens E 55-210 mm F4.5-6.3 OSS (supplied with ILCE-6000Y) 1. 2. 3. 4. 5. 6. *Do Focusing ring Zooming ring Focal-length scale Focal-length index Lens contacts* Mounting index not touch this part directly.
List of viewing mode icons P P* A S M 1. Shooting mode Memory number Memory card/Uploading status Scene Recognition icons Scene Selection 100 Remaining number Aspect ratio of still images 24M / 20M / 12M / 10M / 6.0M / 5.
Frame rate of movies Recording settings of movies NFC is activated Remaining battery Remaining battery warning Flash charge in progress AF Illuminator Auto Object Framing SteadyShot Remote controller Camera-shake warning Airplane Mode No audio recording of movies Wind Noise Reduction Overheating warning Database file full/Database file error Setting Effect OFF
Smart Zoom Clear Image Zoom Digital Zoom Spot metering area View Mode 100-0003 Folder - file number Recording format of movies Protect DPOF DPOF set 2. Drive Mode Metering mode Flash mode/Red-eye reduction ±0.0 Flash compensation Focus mode 7500K A5 G5 White balance Focus area D-Range Opt.
Smile/Face Detect. ±3 ±3 ±3 Creative Style Lock-on AF Picture Effect Smile detection sensitivity indicator 3. Lock-on AF Guide display for Lock-on AF REC 0:12 Recording time of the movie (m:s) Function of the control wheel Function of the control dial Focus 1/250 Shutter speed F3.5 Aperture value ±0.0 Metered Manual ±0.
AE lock Shutter speed indicator Aperture indicator Histogram Picture Effect error Auto HDR image warning 2014-1-1 10:37AM Date of recording 3/7 File number/Number of images in the view mode [5] How to Use Before Use Icons and indicators List of focus range finder frames The focus range finder frame differs as follows depending on the shooting mode.
When using focal plane phase detection AF mode When [Focus Area] is set to [Wide] or [Zone], and if you aim at a moving subject, the focus range finder frame may be displayed as above. When focus is achieved automatically based on the whole range of the monitor When [ AF Illuminator] is set to [Auto], and [Focus Area] is set to [Wide] or [Zone], an AF range finder frame may be shown by the dotted line.
[7] How to Use Before Use Attaching the eyepiece cup Attaching the eyepiece cup It is recommended that you attach the eyepiece cup when you intend to use the viewfinder. 1. Match the bottom side of the eyepiece cup to the viewfinder, and attach it by pushing the top side of the eyepiece cup in. To remove the eyepiece cup, grasp it on the left and right sides and lift it up.
[8] How to Use Before Use Adjusting the viewfinder Adjusting the viewfinder (diopter-adjustment) Adjust the diopter-adjustment dial to your eyesight until the display appears clearly in the viewfinder. If it is difficult to turn the diopter-adjustment dial, remove the eyepiece cup and then adjust the dial.
You can scroll the screen by pressing the up/down side of the control wheel. Hint To view all the shooting advice, select MENU → List]. [11] How to Use Confirming the operation method (Camera Settings) → [Shooting Tip Confirming the operation method Using the control wheel You can select setting items by turning or pressing the top/bottom/right/left side of the control wheel. Your selection is determined when you press on the center of the control wheel. The DISP (Display Setting), (Exposure Comp.
2. Select the desired MENU item using the up/down/left/right side of the control wheel or by turning the control wheel, and then press in the center of the control wheel. The display may move directly from step 1 to step 3 depending on the [Tile Menu] setting. 3. Select the desired setting item by pressing the up/down/left/right side on the control wheel or by turning the control wheel, and then press on the center of the control wheel.
You can recall functions when shooting images. Up to 12 frequently used functions can be registered to the Fn (Function) button. 1. Press the Fn (Function) button in shooting mode. 2. Select a function to be registered by pressing the up/down/left/right side of the control wheel. 3. Set the desired setting by turning the control wheel. Some functions can be fine-tuned using the control dial.
[14] How to Use Confirming the operation method Confirming the operation method Using the “Quick Navi” You can change the settings directly using the Quick Navi screen when using the viewfinder. 1. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen is set to [For viewfinder]. 2. Press Fn (Function) button to switch the screen to Quick Navi screen. 3. Select the desired function by pressing the up/down/left/right side of the control wheel. 4.
Performing settings on the dedicated screen Select the desired function in step 3, then press on the center of the control wheel. The dedicated setting screen for the function appears. Follow the operating guides (A) to perform the settings. [15] How to Use Shooting Shooting still images/movies Shooting still images Shoots still images. 1. Set the shooting mode to (Intelligent Auto). 2. Adjust the monitor angle, and hold the camera. Or look through the viewfinder and hold the camera. 3.
4. Press the shutter button fully down. Focus indicator lights: Image is in the focus. flashes: The focusing has failed. lights: Image is in the focus. The focused position will change to suit the motion of the subject. lights: The focusing is in progress. Hint When the product cannot focus automatically, the focus indicator flashes and the beep does not sound. Either recompose the shot or change the focus setting.
To adjust the shutter speed and aperture value to the desired settings, set the shooting mode to (Movie). 2. Press the MOVIE button again to stop recording. Note If you use a function such as zoom while shooting a movie, the noise of the product operating will be recorded. The sound of the MOVIE button operating may also be recorded when you press the MOVIE button to stop recording. For the continuous shooting time of a movie recording, refer to “Recordable time of movies.
Allows you to shoot still images in higher quality than with Intelligent Auto mode. P (Program Auto): Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value (F value)). Also you can select various settings using the menu. A (Aperture Priority): Allows you to adjust the aperture and shoot when you want to blur the background, etc. S (Shutter Priority): Allows you to shoot fast-moving subjects etc., by manually adjusting the shutter speed.
Note The product will not recognize the scene when you shoot images with zoom functions other than optical zoom. The product may not properly recognize these scenes under some shooting conditions. [19] How to Use Shooting Selecting a shooting mode Superior Auto The product automatically recognizes and evaluates the shooting conditions, and the appropriate settings are set automatically. The product may shoot multiple images and create a composite image, etc.
When [ Quality] is set to [RAW] or [RAW & JPEG], the product cannot create a composite image. [20] How to Use Shooting Selecting a shooting mode About Scene Recognition Scene Recognition operates in [Intelligent Auto] mode and [Superior Auto] mode. This function allows the product to automatically recognize the shooting conditions and shoot the image.
P (Program Auto): Select this mode to shoot with various functions other than the exposure (shutter speed and aperture) adjusted. Note In [Intelligent Auto] mode, you may not be able to shoot dark scenes or back-lit subjects clearly. In [Superior Auto] mode, the recording process takes longer, since the product creates a composite image.
[23] How to Use Shooting Selecting a shooting mode Sweep Panorama Allows you to create a single panoramic image from multiple images shot while panning the camera. 1. Set the mode dial to (Sweep Panorama). 2. Point the camera at the subject for which you want to set the focus and brightness. 3. While pressing the shutter button halfway down, aim the camera at one end of the desired panoramic composition. (A) This part will not be shot. 4. Press the shutter button fully down. 5.
(B) Guidance bar Note If the entire angle of the panoramic shot is not achieved within the set time, a gray area occurs in the composite image. If this happens, move the product faster to record the full panoramic image. When [Wide] is selected for [Panorama: Size], the entire angle of the panoramic shot may not be achieved within the given time. If this happens, try shooting after changing [Panorama: Size] to [Standard].
have changed the position of the mode dial. Menu item details Portrait: Blurs background and sharpens the subject. Accentuates the skin tones softly. Sports Action: Shoots a moving subject at a fast shutter speed so that the subject looks as if it is standing still. The product shoots images continuously while the shutter button is pressed. Macro: Shoots close-ups of the subjects, such as flowers, insects, food, or small items.
Night Scene: Shoots night scenes without losing the dark atmosphere. Hand-held Twilight: Shoots night scenes with less noise and blur without using a tripod. A burst of shots are taken, and image processing is applied to reduce subject blur, camera-shake, and noise. Night Portrait: Shoots night scene portraits using the flash. Anti Motion Blur: Allows you to shoot indoor shots without using the flash and reduces subject blur.
Subjects with erratic movement. Subjects that are too close to the product. Subjects with continuously similar patterns, such as the sky, a beach, or a lawn. Subjects with constant change such as waves or water falls. In the case of [Hand-held Twilight] or [Anti Motion Blur], block noise may occur when using a light source that flickers, such as fluorescent lighting. The minimum distance that you can come close to a subject does not change even if you select [Macro].
image of the movement of the subject is captured to create a more natural and dynamic image. [26] How to Use Shooting Selecting a shooting mode Aperture Priority You can shoot by adjusting the aperture and changing the range in focus, or by defocusing the background. The aperture value can be changed while recording movies. 1. Set the mode dial to A (Aperture Priority). 2. Select the desired value by turning the control dial.
1. Set the mode dial to M (Manual Exposure). 2. Select the desired shutter speed by turning the control wheel. Select the desired aperture value by turning the control dial. When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual) to check the exposure value. Toward +: Images become brighter. Toward − : Images become darker. 0: Appropriate exposure analyzed by the product 3. Adjust the focus and shoot the subject.
Since the shutter speed becomes slow and the camera-shake tends to occur more easily, it is recommended that you use a tripod. The longer the exposure time, the more noise will be visible on the image. After shooting, noise reduction will be done for the same amount of time that the shutter was open. However, you cannot shoot any more while noise reduction is in progress. You cannot set the shutter speed to [BULB] in the following situations: When the [Smile Shutter] function is activated.
[30] How to Use Shooting Selecting a shooting mode Movie You can adjust the shutter speed or aperture value to your desired settings for recording movies. You can also check the image angle before shooting. 1. Set the mode dial to 2. MENU → (Movie). (Camera Settings) → [Movie] → desired setting. When [Mode Dial Guide] is set to [On], you can select the desired settings after you have changed the position of the mode dial. 3. Press the MOVIE button to start recording.
About [Zoom] on the camera When you select other than [Optical zoom only] for [Zoom Setting], you can use the zoom on the camera side. When a Power zoom lens is mounted: If the zoom range of the optical zoom is exceeded when you operate the zoom lever or zoom ring, the camera automatically switches over to the camera side zoom. When a lens other than a Power zoom lens is mounted: MENU → (Camera Settings) → [Zoom] → desired value.
Size] to [M] or [S]. Zoom functions other than the optical zoom are not available when shooting in the following situations: [Sweep Panorama] [Smile/Face Detect.] is set to [Smile Shutter] [ Quality] is set to [RAW] or [RAW & JPEG] You cannot use the Smart Zoom function with movies. When a motor zoom lens is mounted, you cannot use [Zoom] from MENU. If you enlarge images past the zoom range of the optical zoom, the product automatically switches to [Zoom].
About zoom scale The zoom scale that is used in combination with the zoom of the lens changes according to the selected image size. When [ Aspect Ratio] is [3:2] [Zoom Setting]: [Optical zoom only (Smart zoom)] [ Image Size]: L -, M 1.4×, S 2× [Zoom Setting]: [On:ClearImage Zoom] [ Image Size]: L 2×, M 2.8×, S 4× [Zoom Setting]: [On:Digital Zoom] [ Image Size]: L 4×, M 5.
Note You cannot use the flash when recording movies. While charging the flash, flashes. After charging is completed, the flashing icon will light up. When an external flash (sold separately) is attached to the Multi Interface Shoe, the state of the external flash has priority over the setting of the product. You cannot use the product’s internal flash. Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe, turn off the product first.
Slow Sync.: The flash works every time you trigger the shutter. Slow sync shooting allows you to shoot a clear image of both the subject and the background by slowing the shutter speed. Rear Sync.: The flash works right before the exposure is completed every time you trigger the shutter. Rear sync shooting allows you to shoot a natural image of the trail of a moving subject such as a moving car or a walking person.
[38] How to Use Using shooting functions Selecting a screen display mode Switching the screen display (Shooting) You can change the display contents on the screen. 1. Press the DISP (Display Setting) button. Each time you press the DISP button, the recording information display changes as follows: Graphic Display → Display All Info. → No Disp. Info. → Histogram → For viewfinder* → Graphic Display Graphic Display Display All Info. No Disp. Info.
For viewfinder* * [For viewfinder] is not displayed in viewfinder mode. Some display modes are not available in the default settings. To change the display modes, press MENU → (Custom Settings) → [DISP Button] and change the setting. Note Histogram is not displayed during panorama shooting. In movie mode, [For viewfinder] cannot be displayed. Hint You can select different settings for both the viewfinder and the monitor. Look through the viewfinder to set the display settings for the viewfinder.
Graphic Display: Shows basic shooting information. Graphically shows the shutter speed and aperture value. Display All Info.: Shows recording information. No Disp. Info.: Does not show recording information. Histogram: Displays the luminance distribution graphically. [40] How to Use Using shooting functions Selecting a screen display mode DISP Button (Monitor) Allows you to set the screen display modes that can be selected for the monitor using (Display Setting) in shooting mode. 1.
Image Size (still image) The larger the image size, the more detail will be reproduced when the image is printed on large-format paper. The smaller the image size, the more images can be recorded. 1. MENU → (Camera Settings) → [ Image Size] → desired setting. Menu item details Image size when [ Aspect Ratio] is 3:2 L: 24M 6000×4000 pixels M: 12M 4240×2832 pixels S: 6.0M 3008×2000 pixels Image size when [ Aspect Ratio] is 16:9 L: 20M 6000×3376 pixels M: 10M 4240×2400 pixels S: 5.
[43] How to Use Using shooting functions Selecting still image size/image quality Quality (still image) Selects the compression format of still images. 1. MENU → (Camera Settings) → [ Quality] → desired setting. Menu item details RAW: File format: RAW (Records using the RAW compression format.) Digital processing is not performed on this file format. Select this format to process images on a computer for professional purposes. The image size is fixed to the maximum size.
1. MENU → (Camera Settings) → [Panorama: Size] → desired setting. Menu item details When [Panorama: Direction] is [Up] or [Down] Standard: 3872×2160 Wide: 5536×2160 When [Panorama: Direction] is [Left] or [Right] Standard: 8192×1856 Wide: 12416×1856 [45] How to Use Using shooting functions Selecting still image size/image quality Panorama: Direction Sets the direction to pan the camera when shooting panoramic images. 1. MENU → (Camera Settings) → [Panorama: Direction] → desired setting.
Menu item details (Single-shot AF): The product locks the focus when the focus adjustment is achieved. Use [Single-shot AF] when the subject is motionless. (Automatic AF) (default setting): [Single-shot AF] and [Continuous AF] are switched according to the movement of the subject. When the shutter button is pressed halfway down, the product locks the focus when it determines that the subject is motionless, or continues to focus when the subject is in motion.
Focuses automatically on a subject in all ranges of the image. When you press the shutter button halfway down in still image shooting mode, a green frame is displayed around the area that is in focus. Zone: Select a zone on the monitor on which to focus. A zone consists of nine focus areas, and the product automatically selects a focus area on which to focus. Center: Focuses automatically on a subject in the center of the image.
[49] How to Use Using shooting functions Adjusting the focus Focus-lock Shoots images with the focus locked on the desired subject in auto focus mode. 1. MENU → (Camera Settings) → [Focus Mode] → [Single-shot AF]. 2. Place the subject within the AF area and press the shutter button halfway down. The focus is locked. 3. Keep pressing the shutter button halfway down, and place the subject back in the original position to re-compose the shot. 4. Press the shutter button down fully to take the picture.
[51] How to Use Using shooting functions Adjusting the focus Direct manual focus (DMF) You can make fine adjustments manually after the focus is locked. You can quickly focus on a subject rather than using the manual focus from the beginning. This is convenient in cases such as macro shooting. 1. MENU → (Camera Settings) → [Focus Mode] → [DMF]. 2. Press the shutter button halfway down to focus automatically. 3. Keep the shutter button halfway down, rotate the focusing ring to achieve a sharper focus.
You cannot use [ MF Assist] when shooting movies. [ MF Assist] is available only when E-mount lens is attached. [53] How to Use Using shooting functions Adjusting the focus Focus Magnifier You can check the focus by enlarging the image before shooting. 1. MENU → (Camera Settings) → [Focus Magnifier]. 2. Press on the center of the control wheel to enlarge the image and select the position you want to enlarge using up/down/left/right side of the control wheel. 3. Confirm the focus. 4.
5 Sec: Magnifies the images for 5 seconds. No Limit: Magnifies the images until you press the shutter button. [55] How to Use Using shooting functions Adjusting the focus Peaking Level Enhances the outline of in-focus ranges using a specific color in Manual Focus or Direct Manual Focus shooting. This function allows you to confirm the focus easily. 1. MENU → (Custom Settings) → [Peaking Level] → desired setting. Menu item details High: Sets the peaking level to high.
Sets the color used for the peaking function in Manual Focus or Direct Manual Focus shooting. 1. MENU → (Custom Settings) → [Peaking Color] → desired setting. Menu item details Red: Enhances outlines in red. Yellow: Enhances outlines in yellow. White (default setting): Enhances outlines in white. [57] How to Use Using shooting functions Adjusting the focus Lock-on AF Set up the tracking function to continue focusing on the subject. 1. MENU → (Camera Settings) → [Lock-on AF] → desired setting.
1. MENU → (Camera Settings) → [Lock-on AF] → [On] or [On (Start w/shutter)]. 2. Follow the instructions below. If you select [On]: (1) If the target frame (A) is displayed, align the frame onto the subject to be tracked, and press in the center. If the target frame is not displayed, press in the center to display the frame, then press in the center. The product starts tracking the subject. If you select [On (Start w/shutter)]: (1) Decide the composition of the subject to be tracked.
The product automatically adjusts focus before you press the shutter button halfway down. 1. MENU → (Custom Settings) → [ Pre-AF] → desired setting. Menu item details On (default setting): Adjusts focus before you press the shutter button halfway down. Off: Does not adjust focus before you press the shutter button halfway down. Note [ Pre-AF] is available only when an E-mount lens is mounted.
without changing your holding position. 1. MENU → (Custom Settings) → [Custom Key Settings] → button to be assigned → [AF/MF Control Hold] or [AF/MF Ctrl Toggle]. Menu item details AF/MF Control Hold: Switches the focusing mode while the button is held down. AF/MF Ctrl Toggle: Switches the focusing mode until the button is pressed again. Note You cannot set the [AF/MF Control Hold] function to [Left Button], [Right Button] or [Down Button].
When [Scene Selection] is set to [Landscape], [Sports Action] or [Night Scene]. When a Mount Adaptor is attached. When [Focus Area] is set to [Wide] or [Zone], the AF range finder frame is indicated by a dotted line. The AF illuminator emits a very bright light. Although there is no health hazard, do not look directly into the AF illuminator at close range. [63] How to Use Using shooting functions Adjusting the focus AF Micro Adj.
Disp. cont. AF area You can set whether or not to display the focus area that is in focus when [Focus Area] is set to [Wide] or [Zone] and [Focus Mode] is set to [Continuous AF]. 1. MENU → (Custom Settings) → [Disp. cont. AF area] → desired setting. Menu item details On (default setting): Displays the focus area that is in focus. Off: Does not display the focus area that is in focus.
[66] How to Use Using shooting functions Adjusting the focus AF On You can focus using any key instead of pressing the shutter button halfway down. The settings for [Focus Mode] will be applied. 1. Select the desired key and assign the [AF On] function to it using MENU → Settings) → [Custom Key Settings]. (Custom 2. Press the key to which you have assigned the [AF On] function while auto-focus shooting.
When the camera focuses on the eyes and [Smile/Face Detect.] is set to [On], a detection frame is displayed on the face after it is displayed on the eyes. When [Smile/Face Detect.] is set to [Off], a detection frame is displayed on the eyes for a certain time. [68] How to Use Using shooting functions Adjusting the focus AF drive speed (movie) You can switch focusing speed when using autofocus in movie mode. 1. MENU → (Camera Settings) → [ AF drive speed] → desired setting.
Sets the AF Track Duration to normal. This mode is useful when you want to keep the focus on a certain subject when there are some obstacles in front of the subject or in crowded places. [70] How to Use Using shooting functions Adjusting the focus Measuring the exact distance to the subject The mark shows the location of the image sensor*. When you measure the exact distance between the product and the subject, refer to the position of the horizontal line.
Note You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies. If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory effect. Only a value between –3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen when shooting. If you set an exposure beyond this range, the image brightness on the screen does not show the effect, but it will be reflected in the recorded image.
[73] How to Use Using shooting functions Adjusting the exposure AE lock When the contrast between the subject and background is high, such as when shooting a backlit subject or a subject near a window, meter the light at a spot where the subject appears to have the appropriate brightness and lock the exposure before shooting. To reduce the brightness of the subject, meter the light at a spot brighter than the subject and lock the exposure of the entire screen.
Menu item details Auto (default setting): Fixes the exposure after adjusting the focus automatically when you press the shutter button halfway down when [Focus Mode] is set to [Single-shot AF]. When [Focus Mode] is set to [Automatic AF], and the product determines that the subject is moving, or you shoot burst images, the fixed exposure is cancelled. On: Fixes the exposure when you press the shutter button halfway down. Off: Does not fix the exposure when you press the shutter button halfway down.
[76] How to Use Using shooting functions Adjusting the exposure Zebra The zebra pattern will appear over the part of an image if the brightness level exceeds the IRE that you set. Use this zebra pattern as a guide to adjust the brightness. 1. MENU → (Custom Settings) → [Zebra] → desired setting. Menu item details Off (default setting): Does not display the zebra pattern. 70/75/80/85/90/95/100/100+: Adjusts the brightness level. Note The zebra pattern is not displayed during HDMI connection.
You can set the setting range for the shutter speed, aperture, and exposure compensation values. 1. MENU → (Camera Settings) → [Exposure step] → desired setting. Menu item details 0.3EV (default setting)/0.5EV [79] How to Use Using shooting functions Adjusting the exposure Dial/Wheel Ev Comp You can adjust the exposure compensation using the control dial or the control wheel. 1. MENU → (Custom Settings) → [Dial/Wheel Ev Comp] → desired setting.
You can set the drive mode, such as continuous or self-timer shooting. 1. MENU → (Camera Settings) → [Drive Mode] → desired setting. Menu item details Single Shooting (default setting): Shoots one still image. Normal shooting mode. Cont. Shooting: Shoots images continuously while you press and hold down the shutter button. Self-timer: Shoots an image after 10 or 2 seconds. Self-timer(Cont): Shoots images continuously after 10 seconds. Cont.
Continuous shooting speed is set at a maximum of about 2.5 images per second. Hint To hold the focus and exposure during burst, change the following settings. The exposure of the first shot is determined when you press the shutter button halfway down. The exposure setting for the first shot is used for the subsequent shots. Set [Focus Mode] to [Continuous AF] or [Automatic AF]. Set [ AEL w/ shutter] to [Off] or [Auto].
2. Select the desired mode using the right/left side of the control wheel. Menu item details Self-timer(Cont.): 10 Sec. 3 Img. (default setting): Shoots three frames in succession 10 seconds after you press the shutter button. When you press the shutter button, the self-timer lamp flashes, a beep sounds, and the shutter operates after 10 seconds. Self-timer(Cont.): 10 Sec. 5 Img.: Shoots five frames in succession 10 seconds after you press the shutter button.
Cont. Bracket: 0.7EV 3 Image: This setting shoots three images continuously with an exposure value shifted by plus or minus 0.7 EV. Cont. Bracket: 0.7EV 5 Image: This setting shoots five images continuously with an exposure value shifted by plus or minus 0.7 EV. Cont. Bracket: 1.0EV 3 Image: This setting shoots three images continuously with an exposure value shifted by plus or minus 1.0 EV. Cont. Bracket: 2.
Menu item details Single Bracket: 0.3EV 3 Image (default setting): This setting shoots a total of three images in a row with an exposure value shifted by plus or minus 0.3 EV. Single Bracket: 0.3EV 5 Image: This setting shoots a total of five images in a row with an exposure value shifted by plus or minus 0.3 EV. Single Bracket: 0.5EV 3 Image: This setting shoots a total of three images in a row with an exposure value shifted by plus or minus 0.5 EV. Single Bracket: 0.
shooting/Self-timer) WB bracket Shoots three images, each with different color tones according to the selected settings of white balance, color temperature and color filter. 1. MENU → (Camera Settings) → [Drive Mode] → [WB bracket]. 2. Select the desired mode using the right/left side of the control wheel. Menu item details White Balance Bracket: Lo (default setting): Records a series of three images with small changes in the white balance.
The last shot is shown on the Auto Review. [88] How to Use Using shooting functions shooting/Self-timer) Selecting a drive mode (Continuous Bracket order You can set the shooting order for exposure bracketing and white balance bracketing. 1. MENU → (Custom Settings) → [Bracket order] → desired setting Menu item details 0→-→+ (default setting): Records in the following order: 0 → − → +. -→0→+: Records in the following order: − → 0 → +.
Note [ISO AUTO] is selected when using the following functions: [Intelligent Auto] [Superior Auto] [Scene Selection] [Sweep Panorama] The higher the ISO value, the more noise will appear on the images. When shooting movies, ISO values between ISO 100 and ISO 12800 are available. If the ISO value is set to larger value than ISO 12800, the setting is automatically switched to ISO 12800. When you finished the movie recording, the ISO value returns to the original settings.
Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi Frame NR]. [91] How to Use Using shooting functions Correcting the brightness or contrast D-Range Opt. (DRO) By dividing the image into small areas, the product analyzes the contrast of light and shadow between the subject and the background, and creates an image with the optimal brightness and gradation. 1.
image are recorded. 1. MENU → (Camera Settings) → [DRO/Auto HDR] → [Auto HDR]. 2. Select the desired setting using the left/right side of the control wheel. Menu item details Auto HDR: Exposure Diff. Auto (default setting): Corrects the exposure difference automatically. Auto HDR: Exposure Diff. 1.0EV ― Auto HDR: Exposure Diff. 6.0EV: Sets the exposure difference, based on the contrast of the subject. Select the optimal level between 1.0 EV (weak) and 6.0 EV (strong).
Menu item details Auto (default setting): The product automatically detects the light source and adjusts the color tones. Daylight: The color tones are adjusted for the daylight. Shade: The color tones are adjusted for shadiness. Cloudy: The color temperature is adjusted for a cloudy sky. Incandescent: The color temperature is adjusted for places under an incandescent lamp, or under bright lighting, such as in a photo studio. Fluor.
screen appears to allow you perform fine adjustments as required. Note [White Balance] is fixed to [Auto] in the following situations: [Intelligent Auto] [Superior Auto] [Scene Selection] [94] How to Use Using shooting functions Adjusting color tones Capturing a basic white color in [Custom Setup] mode In a scene where the ambient light consists of multiple types of light sources, it is recommended to use the custom white balance in order to accurately reproduce the whiteness. 1.
Off (default setting): Disables the [Picture Effect] function. Toy Camera: Creates a soft image with shaded corners and reduced sharpness. Pop Color: Creates a vivid look by emphasizing color tones. Posterization: Creates a high contrast, abstract look by heavily emphasizing primary colors, or in black and white. Retro Photo: Creates the look of an aged photo with sepia color tones and faded contrast. Soft High-key: Creates an image with the indicated atmosphere: bright, transparent, ethereal, tender, soft.
[Partial Color] [Soft Focus] [HDR Painting] [Miniature] [Illustration] Note When [Partial Color] is selected, images may not retain the selected color, depending on the subject or shooting conditions. You cannot check the following effects on the shooting screen, because the product processes the image after the shot. Also, you cannot shoot another image until image processing is finished. You cannot use these effects with movies. [Soft Focus] [HDR Painting] [Rich-tone Mono.
Vivid: The saturation and contrast are heightened for shooting striking images of colorful scenes and subjects such as flowers, spring greenery, blue sky, or ocean views. Neutral: The saturation and sharpness are lowered for shooting images in subdued tones. This is also suitable for capturing image material to be modified with a computer. Clear: For shooting images in clear tones with limpid colors in highlight, suitable for capturing radiant light.
the bigger the effect on the image. Saturation: The higher the value selected, the more vivid the color. When a lower value is selected, the color of the image is restrained and subdued. Sharpness: Adjusts the sharpness. The higher the value selected, the more the contours are accentuated, and the lower the value selected, the more the contours are softened. Registering preferred settings (Style Box) Select the six style box (the boxes with numbers on the left side ( )) to register preferred settings.
[98] How to Use Using shooting functions Recording movies Record Setting (movie) Selects the image size, frame rate, and image quality for movie recording. The higher the bitrate, the higher the image quality. 1. MENU → When [ (Camera Settings) → [ Record Setting] → desired setting.
24p 24M(FX)*: 25p 24M(FX)**: Records high image quality movies of 1920 × 1080 (24p/25p). This produces a cinema-like atmosphere. Bit-rate: Maximum 24 Mbps 24p 17M(FH)*: 25p 17M(FH)**: Records standard image quality movies of 1920× 1080 (24p/25p). This produces a cinema-like atmosphere. Bit-rate: Average 17 Mbps [ File Format]: [MP4] 1440×1080 12M (default setting): Records movies of 1440 × 1080. Bit-rate: Average 12 Mbps VGA 3M: Records movies of VGA size.
Menu item details On (default setting): Records sound (stereo). Off: Does not record sound. Note The noise of the lens and the product in operation will also be recorded, when [On] is selected. [100] How to Use Using shooting functions Recording movies Wind Noise Reduct. Sets whether or not to reduce wind noise during movie recording. 1. MENU → (Camera Settings) → [Wind Noise Reduct.] → desired setting. Menu item details On: Reduces wind noise. Off (default setting): Does not reduce wind noise.
Menu item details On (default setting): Uses [ Auto Slow Shut.]. The shutter speed automatically slows when recording in dark locations. You can reduce noise in the movie by using a slow shutter speed when recording in dark locations. Off: Does not use [ Auto Slow Shut.]. The recorded movie will be darker than when [On] is selected, but you can record movies with smoother motion and less object blur. Note [ Auto Slow Shut.
2. MENU → (Camera Settings) → [Memory] → desired number. Items that can be registered Shooting mode Aperture (F number) Shutter speed Camera Settings To recall registered settings Set the mode dial to MR, then press the right/left side of the control wheel or turn the control wheel to select the desired memory number. To change registered settings Change the setting to the desired one and re-register the setting to the same mode number. Note Program Shift cannot be registered.
1. MENU → key. (Custom Settings) → [Custom Key Settings] → set a function to the desired Note Some functions cannot be assigned to certain keys. [106] How to Use convenient use Using shooting functions Customizing the shooting functions for Function of the AEL button Once you assign a function to the AEL button, you can perform that function by simply pressing the AEL button when the shooting information screen is displayed. 1. MENU→ setting.
Once you assign a function to the center button, you can perform that function by simply pressing the center button when the shooting information screen is displayed. 1. MENU → setting. (Custom Settings) → [Custom Key Settings] → [Center Button] → desired The functions that can be assigned are displayed on the setup item selection screen.
convenient use Function of the down button Once you assign a function to the down button, you can perform that function by simply pressing the down button when the shooting information screen is displayed. 1. MENU → setting. (Custom Settings) → [Custom Key Settings] → [Down Button] → desired The functions that can be assigned are displayed on the setup item selection screen.
Auto), you can change the settings easily and shoot images. 1. Set the shooting mode to 2. Press (Intelligent Auto) or (Superior Auto). (Photo Creativity) on the control wheel. 3. Select the item to be changed using the control wheel. (Bkground Defocus): Adjusts the blurring of the background. (Brightness): Adjusts brightness. (Color): Adjusts color. (Vividness): Adjusts vividness. (Picture Effect): You can select a desired effect and shoot images with the specific texture. 4.
Detects the faces of your subjects and adjusts the focus, exposure, flash settings and performs image processing automatically. 1. MENU → (Camera Settings) → [Smile/Face Detect.] → desired setting. Menu item details Off: Does not use the [Face Detection] function. On (Regist. Faces) (default setting): Detects the registered face with higher priority using [Face Registration]. On: Detects a face without giving higher priority to the registered face. Smile Shutter: Automatically detects and shoots a smile.
When the [Smile/Face Detect.] is set to [Smile Shutter], you can select the Smile Detection Sensitivity from [On: Slight Smile], [On: Normal Smile] and [On: Big Smile]. Note You cannot use [Face Detection] with the following functions: When using zoom functions other than the optical zoom Up to eight faces of your subjects can be detected. The product may not detect faces at all or may accidentally detect other objects as faces in some conditions.
2. Align the guide frame with the face to be registered, and press the shutter button. 3. When a confirmation message appears, select [Enter]. Note Up to eight faces can be registered. Shoot the face from the front in a brightly lit place. The face may not be registered correctly if it is obscured by a hat, a mask, sunglasses, etc.
[119] How to Use Using shooting functions Setting the other functions of this product Red Eye Reduction When using the flash, it is fired two or more times before shooting to reduce the red-eye phenomenon. 1. MENU → (Camera Settings) → [Red Eye Reduction] → desired setting. Menu item details On: The flash is always fired to reduce the red-eye phenomenon. Off (default setting): Does not use Red Eye Reduction. Note Red Eye Reduction may not produce the desired effects.
screen. Menu item details Off: Does not trim images. Auto (default setting): Automatically trims images into an appropriate composition. Note The trimmed image may not be the best possible composition, depending on the shooting conditions. [121] How to Use Using shooting functions Setting the other functions of this product SteadyShot Sets whether or not to use the SteadyShot function. 1. MENU → (Camera Settings) → [SteadyShot] → desired setting.
reduction is turned on for the duration that the shutter is open. With the function turned on, the grainy noise typical of long exposures is reduced. 1. MENU → (Camera Settings) → [ Long Exposure NR] → desired setting. Menu item details On (default setting): Activates noise reduction for the same duration that the shutter is open. When noise reduction is in progress, a message appears and you cannot take another picture. Select this to prioritize the image quality. Off: Does not activate noise reduction.
The way colors are represented using combinations of numbers or the range of color reproduction is called “color space.” You can change the color space depending on the purpose of the image. 1. MENU → (Camera Settings) → [ Color Space] → desired setting. Menu item details sRGB (default setting): This is the standard color space of the digital camera. Use [sRGB] in normal shooting, such as when you intend to print out the images without any modification.
Place a subject on the diagonal line to express an uplifting and powerful feeling. Off (default setting): Does not display the grid line. [126] How to Use Using shooting functions Setting the other functions of this product Auto Review You can check the recorded image on the screen right after the shooting. You can also set the display time for Auto Review. 1. MENU → (Custom Settings) → [Auto Review] → desired setting.
Setting Effect ON (default setting): Displays Live View in conditions close to what your picture will look like as a result of applying all your settings. This setting is useful when you want to shoot pictures while checking the results of the shot on the Live View screen. Setting Effect OFF: Shows Live View without the effects of exposure compensation, white balance, [Creative Style], or [Picture Effect]. When this setting is used, you can easily check the image composition.
[129] How to Use Using shooting functions Setting the other functions of this product Release w/o Lens Sets whether or not the shutter can be released when no lens is attached. 1. MENU → (Custom Settings) → [Release w/o Lens] → desired setting. Menu item details Enable: Releases the shutter when no lens is attached. Select [Enable] when attaching the product to an astronomical telescope, etc. Disable (default setting): Does not release the shutter when a lens is not attached.
When you shoot at high shutter speeds with a large diameter lens attached, the ghosting of a blurred area may occur, depending on the subject or shooting conditions. In such cases, set this function to [Off]. When a lens made by another manufacturer (including a Minolta/Konica-Minolta lens) is used, set this item to [Off]. If you set this function to [On], the correct exposure will not be set or the image brightness will be uneven.
Auto (default setting): Compensates for darker corners of the screen automatically. Off: Does not compensate for darker corners of the screen. Note The [Shading Comp.] function is only available when an E-mount lens is mounted. The amount of light around the edges may not be corrected, depending on the lens type. [133] How to Use Using shooting functions Setting the other functions of this product Chro. Aber. Comp.
Compensates for distortion of the screen automatically. Off (default setting): Does not compensate for distortion of the screen. Note The [Distortion Comp.] function is only available when an E-mount lens is mounted. Depending on the attached lens, [Distortion Comp.] is fixed to [Auto], and you cannot select [Off].
shooting. 1. MENU → (Custom Settings) → [Custom Key Settings] → set the [Aperture Preview] function to the desired key. 2. Confirm the image by pressing the key to which [Aperture Preview] was assigned. Hint Although you can change the aperture value during the preview, the subject may be defocused if you select a brighter aperture. We recommend that you adjust the focus again. [137] How to Use Using shooting functions Setting the other functions of this product Shot.
Plays back the recorded images. 1. Press the (Playback) button to switch to the playback mode. 2. Select the image with the control wheel. Hint The product creates an image database file on a memory card to record and play back images. An image that is not registered in the image database file may not be played back correctly. To play back images shot using other devices, register those images to the image database file using MENU → [Setup] → [Recover Image DB].
To change the number of images to be displayed MENU → (Playback) → [Image Index] → desired setting. Menu item details 12 Images (default setting)/30 Images To return to single-image playback Select the desired image and press on the center of the control wheel. Displaying a desired image quickly Select the bar on the left of the image index screen using the control wheel, then press the top/bottom side of the control wheel.
You can delete an image displayed. 1. Display the image you want to delete. 2. Press the (Delete) button. 3. Select [Delete] using the control wheel, then press [143] How to Use Viewing on the center of the control wheel. Deleting images Deleting multiple selected images You can delete multiple selected images. 1. MENU → (Playback) → [Delete] → desired setting. Menu item details Multiple Img.: Deletes the selected images.
1. Press the (playback) button to switch to playback mode. 2. Select the movie to be played back using the control wheel. 3. To play back movies, press on the center. Available operations during movie playback You can perform slow playback and sound volume adjustment, etc. by pressing the bottom side of the control wheel.
To pause playback, press on the center again. To return to the display of the entire image, press the MENU key. Note Panoramic images shot using other product may be displayed in a different size from the actual size, or may not scroll correctly. [146] How to Use Viewing Printing Specify Printing You can specify in advance on the memory card which still images you want to print out later. The (print order) icon will appear on the specified images. DPOF refers to “Digital Print Order Format.” 1.
You cannot add the DPOF mark to the following files: Movies RAW images [147] How to Use Viewing Using viewing functions View Mode Sets the View Mode (image display method). 1. MENU → (Playback) → [View Mode] → desired setting. Menu item details Date View: Displays the images by date. Folder View(Still): Displays only still images. Folder View(MP4): Displays only MP4-format movies. AVCHD View: Displays only AVCHD-format movies.
[149] How to Use Viewing Using viewing functions Slide Show Automatically plays back images continuously. 1. MENU → (Playback) → [Slide Show] → desired setting. 2. Select [Enter]. Menu item details Repeat: Select [On], in which images are played back in a continuous loop, or [Off] (default setting), in which the product exits the slideshow when all the images are played back once.
Note You cannot rotate the movies. You may not be able to rotate images shot using other products. When viewing rotated images on a computer, the images may be displayed in their original orientation depending on the software. [151] How to Use Viewing Using viewing functions Protect Protects recorded images against accidental erasure. The images. 1. MENU → mark is displayed on protected (Playback) → [Protect] → desired setting. Menu item details Multiple Img.
Outputs still images in 4K resolution to an HDMI-connected TV that supports 4K. 1. Turn off this product and the TV. 2. Connect the HDMI micro terminal of this product to the HDMI jack of the TV using an HDMI cable (sold separately). 3. Turn on the TV and switch the input. 4. Turn on this product. 5. Play back a still image, then press the bottom side of the control wheel. The still image is output in 4K resolution.
1. Turn off both this product and the TV. 2. Connect the HDMI micro terminal of this product to the HDMI jack of the TV using an HDMI cable (sold separately). 3. Turn on the TV and switch the input. 4. Turn on this product. Images shot with the product appear on the TV screen. Hint This product is compatible with the PhotoTV HD standard.
[154] How to Use Viewing Viewing images on a TV Viewing images on a “BRAVIA” Sync-compatible TV By connecting this product to a TV that supports “BRAVIA” Sync using an HDMI cable (sold separately), you can operate this product with the TV Remote Control. 1. Turn off both this product and the TV. 2. Connect the HDMI micro terminal of the product to the HDMI jack of the TV using an HDMI cable (sold separately). 3. Turn on the TV and switch the input. 4. Turn on this product. 5.
Monitor Brightness You can adjust the brightness of the screen. 1. MENU → (Setup) → [Monitor Brightness] → desired setting. Menu item details Manual (default setting): Adjusts the brightness within the range of –2 to +2. Sunny Weather: Sets the brightness appropriately for shooting outdoors. Note The [Sunny Weather] setting is too bright for shooting indoors. Set [Monitor Brightness] to [Manual] for indoor shooting. [156] How to Use Changing settings Setup menu Viewfinder Bright.
Adjusts the color temperature of the electronic viewfinder. 1. MENU → (Setup) → [Finder Color Temp.] → desired setting. Menu item details -2 to +2: When you select “-,” the viewfinder screen changes to a warmer color, and when you select “+,” it changes to a colder color. [158] How to Use Changing settings Setup menu Volume Settings Adjusts the sound volume. 1. MENU → (Setup) → [Volume Settings] → desired setting.
[160] How to Use Changing settings Setup menu Upload Settings(Eye-Fi) Sets whether to use the upload function when using an Eye-Fi card (commercially available). This item appears when an Eye-Fi card is inserted into the product’s memory card slot. 1. MENU → (Setup) → [Upload Settings] → desired setting. 2. Set your Wi-Fi network or destination on the Eye-Fi card. For details, refer to the manual supplied with the Eye-Fi card. 3.
be sure that “Endless Memory Mode” is turned off. [161] How to Use Changing settings Setup menu Tile Menu Selects whether to always display the first screen of the menu when you press the MENU button. 1. MENU → (Setup) → [Tile Menu] → desired setting. Menu item details On: Always displays the first screen of the menu (Tile Menu). Off (default setting): Deactivates the Tile Menu display.
You can set whether [Delete] or [Cancel] is selected as the default setting on the delete confirmation screen. 1. MENU → (Setup) → [Delete confirm.] → desired setting. Menu item details "Delete" first: [Delete] is selected as the default setting. "Cancel" first (default setting): [Cancel] is selected as the default setting. [164] How to Use Changing settings Setup menu Pwr Save Start Time You can set time intervals to automatically switch to power save mode.
Note This function is provided with 1080 50i-compatible devices only. It is not provided with 1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the bottom of the product. If you insert a memory card that has previously been formatted with the PAL system, a message telling you that you must re-format the card appears. When you record using the NTSC system, re-format the memory card or use another memory card. When the NTSC mode is selected, the “Running on NTSC.
[167] How to Use Changing settings Setup menu Demo Mode The [Demo Mode] function displays the movies recorded on the memory card automatically (demonstration), when the camera has not been operated for a certain time. Normally select [Off]. 1. MENU → (Setup) → [Demo Mode] → desired setting. Menu item details On: The movie playback demonstration starts automatically if the product is not operated for about one minute. Only protected AVCHD movies are played back.
On: Allows Wireless Remote Commander operation. Off (default setting): Does not allow Wireless Remote Commander operation. Note The RMT-DSLR1 Wireless Remote Commander cannot be used for movie recording. The lens or lens hood may block the remote sensor that receive the signals. Use the Wireless Remote Commander in the position from which the signal can reach the product. When [MOVIE Button] is set to [Off], the START/STOP button (Movie button) of the RMTDSLR2 Wireless Remote Commander is not activated.
When connecting this product to a “BRAVIA” Sync-compatible TV using an HDMI cable (sold separately), you can operate this product by aiming the TV remote control at the TV. 1. MENU → (Setup) → [CTRL FOR HDMI] → desired setting. Menu item details On (default setting): You can operate this product with a TV’s remote control. Off: You cannot operate this product with a TV’s remote control. Note [CTRL FOR HDMI] is available only with a “BRAVIA” Sync-compatible TV.
1. MENU → (Setup) → [USB Connection] → desired setting. Menu item details Auto (default setting): Establishes a Mass Storage or MTP connection automatically, depending on the computer or other USB devices to be connected. Windows 7 or Windows 8 computers are connected in MTP, and their unique functions are enabled for use. Mass Storage: Establishes a Mass Storage connection between this product, a computer, and other USB devices.
[174] How to Use Changing settings Setup menu Language Selects the language to be used in the menu items, warnings and messages. 1. MENU → (Setup) → [ [175] How to Use Language] → desired language. Changing settings Setup menu Date/Time Setup Sets the date and time again. 1. MENU → (Setup) → [Date/Time Setup] → desired setting. Menu item details Daylight Savings: Selects Daylight Savings [On]/[Off]. Date/Time: Sets the date and time. Date Format: Selects the date and time display format.
[177] How to Use Changing settings Setup menu Format Formats (initializes) the memory card. When you use a memory card with this product for the first time, it is recommended that you format the card using the product for stable performance of the memory card. Note that formatting permanently erases all data on the memory card, and is unrecoverable. Save valuable data on a computer, etc. 1. MENU → (Setup) → [Format]. Note Formatting permanently erases all data including even protected images.
You can change the recording folder to which images are recorded. 1. MENU → (Setup) → [Select REC Folder] → desired folder. Note You cannot select the folder when you select the [Date Form] setting. [180] How to Use Changing settings Setup menu New Folder Creates a new folder in the memory card. A new folder is created with a folder number one greater than the largest folder number currently used. Images are recorded in the newly created folder.
Standard Form (default setting): The folder name form is as follows: folder number + MSDCF. Example: 100MSDCF Date Form: The folder name form is as follows: folder number + Y (the last digit)/MM/DD. Example: 10040405 (Folder number: 100, date: 04/05/2014) Note The MP4 movie folder form is fixed as “folder number + ANV01”. [182] How to Use Changing settings Setup menu Recover Image DB If image files were processed on a computer, problems may occur in the image database file.
Version Displays the version of this product, lens and Mount Adaptor. 1. MENU → (Setup) → [Version]. [185] How to Use Changing settings Setup menu Certification Logo (Overseas model only) Displays some of the certification logos for this product. 1. MENU → [186] How to Use (Setup) → [Certification Logo]. Changing settings Setup menu Setting Reset Resets the product to the default settings. Even if you perform [Setting Reset], the recorded images are retained. 1.
[187] How to Use Using Wi-Fi functions Connecting this product and a Smartphone PlayMemories Mobile To use [Smart Remote Embedded] or [Send to Smartphone], etc., the application PlayMemories Mobile should be installed on your smartphone. Download and install the application PlayMemories Mobile from your smartphone’s application store. If PlayMemories Mobile is already installed on your smartphone, be sure to update it to the latest version.
The smartphone is connected to the product. [189] How to Use Using Wi-Fi functions Connecting this product and a Smartphone Connecting the product to an iPhone or iPad 1. Select the model name of this product (DIRECT-xxxx: xxxx) on the Wi-Fi setting screen of your iPhone or iPad. 2. Input the password displayed on this product. The iPhone or iPad is connected to the product.
3. Confirm that your iPhone or iPad was connected to the “SSID” shown on this product. 4. Return to the “Home” screen and launch PlayMemories Mobile. [190] How to Use Using Wi-Fi functions Connecting this product and a Smartphone Calling up an application using [One-touch(NFC)] You can call up a desired application from the application menu of this product by touching an NFC-enabled Android smartphone to the product.
When the product is in playback mode, the registered application will not launch even if you touch the smartphone to the product. When you call up an application with one touch, even if that application does not work with a smartphone, PlayMemories Mobile on smartphone will launch. Exit PlayMemories Mobile without performing an operation. If you do not exit PlayMemories Mobile, the smartphone stays in standby connection status.
This product shares the connection information for [Smart Remote Embedded] with a device that has permission to connect. If you want to change the device that is permitted to connect to the product, reset the connection information by following these steps. MENU → (Wireless) → [SSID/PW Reset]. After resetting the connection information, you must register the smartphone again. Depending on future version upgrades, the operational procedures or screen displays are subject to change without notice.
devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler with just a touch on the designated touch-point. NFC (Near Field Communication) is an international standard of short-range wireless communication technology. Note If you cannot make a connection, do as the following: Launch PlayMemories Mobile on your smartphone, and then move the smartphone slowly toward the (N mark) of this product. If the smartphone is in a case, remove it. If the product is in a case, remove it.
Menu item details Select on This Device: Selects an image on the product to be transferred to the smartphone. (1) Select from among [This Image], [All Still Images on Date]/[All Movie(MP4) on Date], [All Images on This Date] or [Multiple Images]. (2) If you select [Multiple Images], select the desired images using on the control wheel, then press MENU → [Enter]. Select on Smartphone: Displays all images recorded on the product’s memory card on the smartphone.
3. Touch the smartphone to the product. The product and the smartphone are connected, and PlayMemories Mobile automatically launches on the smartphone, and then the displayed image is sent to the smartphone. Before you touch the smartphone, cancel the sleep and lock-screen functions of the smartphone. The NFC function is available only when the (N mark) is displayed on the product. Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile launches.
(N mark) of this product. If the smartphone is in a case, remove it. If the product is in a case, remove it. Confirm that the NFC function is activated on the smartphone. When [Airplane Mode] is set to [On], you cannot connect the product and the smartphone. Set [Airplane Mode] to [Off]. You cannot send AVCHD format movies.
2. When you want to play back images using slideshow, press control wheel. on the center of the To display the next/previous image manually, press the right/left side of the control wheel. To change the device to be connected, press the bottom side of the control wheel, then select [Device list]. Slideshow settings You can change the slideshow settings by pressing the bottom side of the control wheel. Playback Selection: Selects the group of images to be shown.
[197] How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functions Airplane Mode When you board an airplane, etc., you can turn off all Wi-Fi functions temporarily. 1. MENU → (Wireless) → [Airplane Mode] → desired setting. If you set [Airplane Mode] to [On], an airplane mark will be displayed on the screen.
name of the access point, security system, and password. The password may be preset in some devices. For details, see the access point operating instructions, or consult the access point administrator. 1. MENU → (Wireless) → [Access Point Set.]. 2. Select the access point you want to register. When the desired access point is displayed on the screen: Select the desired access point. When the desired access point is not displayed on the screen: Select [Manual Setting] and set the access point.
1. Input box The characters you entered are displayed. 2. Switch character types Each time you press on the center of the control wheel, the character type switches among alphabet letters, numerals and symbols. 3. Keyboard Each time you press on the center, the character that you enter will be displayed. For example: If you want to enter “abd” 4. 5. 6. 7. 8.
[200] How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functions Edit Device Name You can change the device name under Wi-Fi Direct. 1. MENU → (Wireless) → [Edit Device Name]. 2. Select the input box, then input the device name → [OK]. For input method, refer to “How to use the keyboard.” [201] How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functions Disp MAC Address Displays the MAC address of this product. 1.
[203] How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functions Reset Network Set. Resets all the network settings to default settings. 1. MENU → [204] How to Use (Wireless) → [Reset Network Set.] → [OK]. Adding applications to the product PlayMemories Camera Apps PlayMemories Camera Apps You can add the desired functions to this product by connecting to the application download website (PlayMemories Camera Apps) via the Internet.
1. Access the application download website. http://www.sony.net/pmca 2. Follow the instructions on the screen and acquire a service account. Follow the instructions on the screen to download the desired application to the product. [207] How to Use Adding applications to the product Installing the applications Downloading applications You can download applications using your computer. 1. Access the application downloading website. http://www.sony.net/pmca 2.
1. MENU → (Application) → Application List → (PlayMemories Camera Apps), then follow the instructions on the screen to download applications. Acquire a service account in advance. Note When the IP address setting of this product is [Manual], you cannot download an application. Set [IP Address Setting] to [Auto].
The uninstalled application can be re-installed. For details, see the application download website. [211] How to Use Adding applications to the product Managing the applications Changing the order of applications You can change the order in which added applications are displayed on this product. 1. MENU → (Application) → Application List → [Application Management] → [Sort]. 2. Select the application of which you want to change the order. 3. Select the destination.
[214] How to Use Viewing on computers Using the software PlayMemories Home With PlayMemories Home, you can do the following: You can import images shot with this product to your computer. You can play back the images imported to your computer. You can share your images using PlayMemories Online. Also for Windows, you can do the following: You can organize images on the computer on a calendar by shooting date to view them. You can edit and correct images, such as by trimming and resizing.
A: To the Multi/Micro USB Terminal B: To the USB jack of the computer Note Log on as Administrator. It may be necessary to restart your computer. When the restart confirmation message appears, restart the computer following the instructions on the screen. DirectX may be installed depending on your computer’s system environment. Hint For details on PlayMemories Home, refer to the Help of PlayMemories Home or the PlayMemories Home support page (http://www.sony.co.jp/pmh-se/) (English only).
[217] How to Use Viewing on computers Using the software “Image Data Converter” With “Image Data Converter,” you can do the following: You can edit images recorded in RAW format with various corrections, such as tone curve and sharpness. You can adjust images with white balance, exposure, and [Creative Style], etc. You can save the still images displayed and edited on a computer. You can either save the still image as RAW format or save it in the general file format.
(English only). http://www.sony.co.jp/ids-se/ [220] How to Use Viewing on computers Using the software “Remote Camera Control” When using “Remote Camera Control,” the following operations are available on your computer. Changing this product’s settings and shooting. Recording images directly to the computer. Performing interval timer shooting. Use these functions after selecting MENU → (Setup) → [USB Connection] → [PC Remote]. For details on how to use “Remote Camera Control,” refer to the Help.
Finder → [Applications] → [Remote Camera Control] → [Remote Camera Control Ver.3], and select [Help] from the menu bar → [Remote Camera Control Help Guide]. [223] How to Use Viewing on computers Connecting this product and a computer Connecting the product to a computer 1. Insert a sufficiently charged battery pack into the product. 2. Turn on the product and the computer. 3. Connect the product and your computer using the micro USB cable (A) (supplied).
Importing images to the computer without using PlayMemories Home (For Mac) Connect the product to your Mac computer. Double-click the newly recognized icon on the desktop → the folder in which the image you want to import is stored. Then drag and drop the image file on to the hard disk icon. Note For operations such as importing AVCHD movies to the computer, use PlayMemories Home. Do not edit or otherwise process AVCHD movie files/folders from the connected computer.
High-definition image quality (HD) A Blu-ray Disc enables you to record longer duration of high definition image quality (HD) movies than DVD discs. High-definition image quality (HD) (AVCHD recording disc) High definition image quality (HD) movie can be recorded on DVD media, such as DVD-R discs, and a high definition image quality (HD) disc is created. You can play a high definition image quality (HD) disc on AVCHD format playback devices, such as a Sony Blu-ray Disc player and a PlayStation®3.
(Only for Windows) Creates a disc with high-definition image quality (HD) Writable movie format: PS, FX, FH Player: Blu-ray Disc playback devices (Sony Blu-ray Disc player, PlayStation®3, etc.) Creates a disc with high-definition image quality (HD) (AVCHD recording disc) Writable movie format: PS*, FX*, FH Player: AVCHD format playback devices (Sony Blu-ray Disc player, PlayStation®3, etc.
Standard definition image quality (STD) Note When creating AVCHD discs using PlayMemories Home from movies recorded with the [ Record Setting] of [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i 24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)], the image quality is converted and it is not possible to create discs that have the original image quality. Converting the image quality takes time. To record movies with the original image quality, use Blu-ray Discs.
When the memory card is removed or the product is turned off during a read or write operation. When the memory card is used in locations subject to static electricity or electrical noise. Creating an image database file If you insert a memory card that does not contain an image database file into the product and turn on the power, the product automatically creates an image database file using some of the memory card’s capacity.
1080 50i-compatible device: 50i Notes for when on board an airplane In an airplane, set [Airplane Mode] to [On]. On image data compatibility This product conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association). Playback of images recorded with your product on other equipment and playback of images recorded or edited with other equipment on your product are not guaranteed.
Make sure not to bump the lens or subject it to force. Notes on the flash Do not cover the flash with your fingers. Do not carry the product by the flash unit, or use excessive strength on it. If water, dust or sand get into the open flash unit, it may cause a malfunction. Notes on discarding or transferring this product to others When discarding or transferring this product to others, make sure to perform the following operation to protect private information.
Charge the battery pack (supplied) before using the product for the first time. The charged battery pack will discharge little by little even if you do not use it. Charge the battery pack each time before you use the product so that you do not miss any opportunities to shoot images. You can charge the battery pack even if it is not completely discharged. You can use a partially charged battery pack. If the Charge lamp flashes and charging is canceled halfway, remove the battery pack once then reinsert it.
using a soft cloth or a cotton swab. Remaining battery indicator The remaining battery indicator appears on the screen. A: Battery level high B: Battery exhausted It takes about one minute for the correct remaining battery indicator to appear. The correct remaining battery indicator may not be displayed under some operating or environmental conditions. If the remaining battery time does not appear on the screen, press the DISP (Display Setting) button to display it.
If the product's Charge lamp flashes while charging, remove the battery pack being charged, and then insert the same battery pack firmly back into the product. If the Charge lamp flashes again, this may indicate a faulty battery or that a battery pack other than the specified type has been inserted. Check that the battery pack is the specified type.
SD cards also support UHS-I standard. Note When you use a memory card with this product for the first time, it is recommended that you format the card using the product for stable performance of the memory card before shooting. Note that formatting permanently erases all data on the memory card, and is unrecoverable. Save precious data on a computer, etc.
Memory Stick PRO-HG Duo media: *1*2 Memory Stick XC-HG Duo media: *1*2 *1 This Memory Stick is equipped with MagicGate function. MagicGate is copyright protection technology that uses encryption technology. Data recording/playback that requires MagicGate functions cannot be performed with this product. *2 High-speed *3 When data transfer using a parallel interface is supported. recording movies, only media marked with Mark2 can be used.
Cleaning the camera body Do not touch the parts of the product inside the lens mount, such as a lens signal contact. To clean inside the lens mount, use a commercially available blower* to blow any dust off. *Do not use a spray-type blower as doing so may cause a malfunction. Cleaning the product surface Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth.
4GB: 410 images 8GB: 820 images 16GB: 1650 images 32GB: 3300 images 64GB: 6600 images RAW & JPEG 2GB: 54 images 4GB: 105 images 8GB: 220 images 16GB: 440 images 32GB: 880 images 64GB: 1750 images RAW 2GB: 74 images 4GB: 145 images 8GB: 300 images 16GB: 600 images 32GB: 1200 images 64GB: 2400 images *When the [ Aspect Ratio] is set to other than [3:2], you can record more pictures than shown above. (Except when [ Quality] is set to [RAW].
50i 24M(FX) 2GB: 10 m 4GB: 20 m 8GB: 40 m 16GB: 1 h 30 m 32GB: 3 h 64GB: 6 h 60i 17M(FH) 50i 17M(FH) 2GB: 10 m 4GB: 30 m 8GB: 1 h 16GB: 2 h 32GB: 4 h 5 m 64GB: 8 h 15 m 60p 28M(PS) 50p 28M(PS) 2GB: 9 m 4GB: 15 m 8GB: 35 m 16GB: 1 h 15 m 32GB: 2 h 30 m 64GB: 5 h 5 m 24p 24M(FX) 25p 24M(FX) 2GB: 10 m 4GB: 20 m 8GB: 40 m 16GB: 1 h 30 m 32GB: 3 h 64GB: 6 h 24p 17M(FH) 25p 17M(FH) 2GB: 10 m 4GB: 30 m 8GB: 1 h 16GB: 2 h 32GB: 4 h 64GB: 8 h 1440×1080 12M 2GB: 20 m 4GB: 40 m 8GB: 1 h 20 m
16GB: 2 h 45 m 32GB: 5 h 30 m 64GB: 11 h VGA 3M 2GB: 1 h 10 m 4GB: 2 h 25 m 8GB: 4 h 55 m 16GB: 10 h 32GB: 20 h 64GB: 40 h Continuous shooting is possible for approximately 29 minutes for each shooting (limited by product specifications). For [MP4 12M] size movies, continuous shooting is possible for approximately 20 minutes (limited by 2 GB file size).
NTSC system: Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. PAL system: Australia, Austria, Belgium, China, Croatia, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Indonesia, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Rumania, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, Turkey, United Kingdom, Viet Nam, etc.
[241] How to Use Precautions/This product Other information LA-EA1 Mount Adaptor If you use the LA-EA1 Mount Adaptor (sold separately), the following functions are available. Autofocus: Available with SAM/SSM lens only* AF system: Contrast AF AF/MF Select: Can be changed using the operating switch on the lens. Focus Mode: Single-shot AF *When an A-mount lens is attached, the autofocus speed will be slower than when an E-mount lens is attached.
Other lenses: Can be changed using MENU. Focus Mode: Available modes are as follows (Single-shot AF/Continuous AF) Available focus area Wide: The product automatically selects a focus area from among 15 areas. Center: The product uses the focus area located in the center area exclusively. Flexible Spot: You can select a focus area from 15 areas using the control wheel.
If you use the LA-EA4 Mount Adaptor (sold separately), the following functions are available. Autofocus: Available AF system: Phase Detection AF, which is controlled by the dedicated AF sensor inside the Mount Adaptor AF/MF Select: SAM lens: Can be changed using the operating switch on the lens. SSM lens: Can be changed using the operating switch on the lens. When the switch on the lens is set to AF, you can use MENU to change the focus method. Other lenses: Can be changed using MENU.
[246] How to Use Precautions/This product Other information License Notes on the License This product comes with software that are used based on licensing agreements with the owners of that software. Based on requests by the owners of copyright of these software applications, we have an obligation to inform you of the following. Please read the following sections. Licenses (in English) are recorded in the internal memory of your product.
[247] How to Use Precautions/This product Trademarks Trademarks The following marks are registered trademarks or trademarks of Sony Corporation.
Add further enjoyment with your PlayStation 3 by downloading the application for PlayStation 3 from PlayStation Store (where available.) The application for PlayStation 3 requires PlayStation Network account and application download. Accessible in areas where the PlayStation Store is available. Eye-Fi is a trademark of Eye-Fi Inc. In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers.
[250] Troubleshooting Troubleshooting Battery pack and power You cannot turn on the product. After inserting the battery pack into the product, it may take a few moments for the product to power up. Make sure that the battery pack is inserted correctly. The battery pack will discharge by itself even if you do not use it. Charge the battery pack before use. Make sure that the battery is NP-FW50. [251] Troubleshooting Troubleshooting Battery pack and power The power turns off suddenly.
This phenomenon occurs when you charge the battery pack in an extremely hot or cold location. The optimum temperature for charging the battery pack is between 10 °C and 30 °C (50 °F and 86 °F). [254] Troubleshooting Troubleshooting Battery pack and power The battery pack has not been charged even if the charge lamp on the product has turned off. Make sure that the battery is NP-FW50. Batteries which have not been used for more than a year may have deteriorated.
You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the record position. Check the free capacity of the memory card. You cannot record images while charging the flash. The lens is not attached properly. Attach the lens properly. [258] Troubleshooting Troubleshooting Shooting still images/movies Recording takes a long time. The noise reduction function is processing an image. This is not a malfunction. You are shooting in RAW mode.
[261] Troubleshooting Troubleshooting Shooting still images/movies The flash does not work. Raise the flash. You cannot use a flash in the following situations: [Anti Motion Blur], [Night Scene] or [Hand-held Twilight] in Scene Selection is selected. During Sweep Panorama shooting. During movie recording. [262] Troubleshooting Troubleshooting Shooting still images/movies Fuzzy white circular spots appear on images shot using the flash. Particles (dust, pollen, etc.
[265] Troubleshooting Troubleshooting Shooting still images/movies The aperture value and/or shutter speed and/or metering indicator flashes. The subject is too bright or too dark to shoot using the current aperture value and/or shutter speed settings. Readjust the settings. [266] Troubleshooting Troubleshooting Shooting still images/movies The image colors are not correct. Adjust [White Balance]. [Picture Effect] is set. Set [Picture Effect] to [Off].
[269] Troubleshooting Troubleshooting Shooting still images/movies Dots appear and remain on the screen. This is not a malfunction. These dots are not recorded. [270] Troubleshooting Troubleshooting Shooting still images/movies You cannot shoot images continuously. The memory card is full. Delete unnecessary images. The battery level is low. Insert a charged battery pack. [271] Troubleshooting Troubleshooting Shooting still images/movies The image is not clear in the viewfinder.
[273] Troubleshooting Troubleshooting Shooting still images/movies The corners of the picture are too dark. If any filter or hood is used, take it off and try shooting again. Depending on the thickness of the filter and improper attachment of the hood, the filter or the hood may partially appear in the image. The optical properties of some lenses may cause the periphery of the image to appear too dark (insufficient light). You may compensate for this phenomenon with [Shading Comp.].
succession, the recharging process may take longer than usual to avoid overheating of the camera. [277] Troubleshooting Troubleshooting Shooting still images/movies The control dial or control wheel does not work. [Dial / Wheel Lock] is on. Hold down the Fn button until the lock is released, or set the [Dial / Wheel Lock] to [Unlock]. [278] Troubleshooting Troubleshooting Viewing images Images cannot be played back. Make sure that the memory card is fully inserted into the product.
Cancel the protection. [281] Troubleshooting Troubleshooting Viewing images The image was deleted by mistake. Once you have deleted an image, you cannot restore it. We recommend that you protect images that you do not want to delete. [282] Troubleshooting Troubleshooting Viewing images A DPOF mark cannot be put. You cannot place DPOF marks on RAW images. [283] Troubleshooting Troubleshooting Wi-Fi You cannot find the wireless access point to be connected.
[285] Troubleshooting Troubleshooting Wi-Fi [Send to Computer] is canceled halfway. When the battery remaining level is low, [Send to Computer] may be canceled halfway. Charge the battery pack and try again. [286] Troubleshooting Troubleshooting Wi-Fi You cannot send movies to a smartphone. You cannot send AVCHD movies to a smartphone. Set [ movies. [287] Troubleshooting Troubleshooting File Format] to [MP4] to record Wi-Fi [Smart Remote Embedded] or [Send to Smartphone] is canceled halfway.
[289] Troubleshooting Troubleshooting Wi-Fi You cannot use One-Touch connection (NFC). Place the (N mark) on the smartphone and the (N mark) on the product as close together as possible. If there is no response, move the smartphone a few millimeters or move the smartphone away from this product, wait more than 10 seconds, and then touch them together again. [Airplane Mode] is set to [On]. Set [Airplane Mode] to [Off]. Check whether the NFC function is activated on your smartphone.
[292] Troubleshooting Troubleshooting Computers The image and sound are interrupted by noise when viewing a movie on a computer. You are playing back the movie directly from the memory card. Import the movie to your computer using PlayMemories Home and play it back. [293] Troubleshooting Troubleshooting Computers Images exported from a computer cannot be viewed on this product.
When you print the images recorded in Adobe RGB mode using sRGB printers that are not compatible with Adobe RGB (DCF2.0/Exif2.21), the images are printed at a lower saturation. [297] Troubleshooting Troubleshooting Printing Images are printed with both edges cut off. Depending on your printer, the left, right, top, and bottom edges of the image may be cut off. Especially when you print an image shot with [ Aspect Ratio] set to [16:9], the lateral end of the image may be cut off.
before using it. [300] Troubleshooting Troubleshooting Others The product becomes warm when you use it for a long time. This is not a malfunction. Turn off the product and do not use it for a while. [301] Troubleshooting Troubleshooting Others The Clock Set screen appears when you turn on the product. Set the date and time again. The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for 24 hours or more with the power left off.
remove the battery pack, and allow it to cool down before trying this corrective procedure. If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power cord and turn on the product again. If the product repeats the same error often or still does not work after trying these solutions, consult your Sony dealer or local authorized Sony service facility. [304] Troubleshooting Troubleshooting Others “--E-” appears on the screen.
An incompatible memory card is inserted. Processing... When performing noise reduction, the reduction process takes place. You cannot do any further shooting during this reduction process. Unable to display. Images recorded with other products or images modified with a computer may not be displayed. Cannot recognize lens. Attach it properly. The lens is not attached properly, or the lens is not attached. If the message appears when a lens is attached, reattach the lens.
Image DataBase File error There is something wrong in the Image Database File. Select [Setup] → [Recover Image DB]. System Error Camera Error. Turn power off then on. Remove the battery pack, and then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Unable to magnify. Unable to rotate image. Images recorded with other products may not be enlarged or rotated.
Sweep Panorama Auto HDR Lock-on AF Subjects too small or too large Sweep Panorama Lock-on AF Scenes with little contrast, such as the sky or a sandy beach Sweep Panorama Superior Auto AF drive speed AF Track Duration Scenes changing constantly, such as a waterfall Sweep Panorama Superior Auto AF drive speed AF Track Duration