User Manual

ILCE-9M2

5-010-473-91 (1)

C:\5010473911_GB100\5010473911ILCE9M2UC2\01GB-ILCE9M2UC2\030BAS.indd

DTP data saved: 2019/07/26 10:20

PDF file created: 2019/07/26 10:21

To move the focus area

• You can move the focus area in [Flexible Spot], [Expand Flexible Spot],

[Zone], [Tracking: Flexible Spot], [Tracking: Expand Flexible Spot],

or [Tracking: Zone] by operating the multi-selector. If you assign

[Focus Standard] to the center of the multi-selector beforehand, you can

move the focusing frame back to the center of the monitor by pressing

the center of the multi-selector.

• You can move the focusing frame quickly by touching and dragging

it on the monitor. Set [Touch Operation] (page50) to [On] and

[Func. of Touch Operation] (page51) to [Touch Focus] beforehand.

To track the subject temporarily (Tracking On)

You can temporarily change the setting for [Focus Area] to [Tracking] while

you press and hold down the custom key to which you have assigned

[Tracking On] in advance. The [Focus Area] setting before you activated

[Tracking On] will switch to the equivalent [Tracking] setting.

For example:

[Focus Area] before you activate

[Tracking On]

[Focus Area] while [Tracking On] is active

[Wide] [Tracking: Wide]

[Flexible Spot: S] [Tracking: Flexible Spot S]

[Expand Flexible Spot] [Tracking: Expand Flexible Spot]

Hint

• In the default settings, [Focus Area] is assigned to the C2 button.

Note

• [Focus Area] is locked to [Wide] in the following situations:

– [Intelligent Auto]

• The focus area may not light up during continuous shooting or when the

shutter button is pressed all the way down at once.

• When the mode dial is set to (Movie) or , or during movie shooting,

[Tracking] cannot be selected as the [Focus Area].