User Manual

ILCE-9M2
5-010-473-91 (1)
GB
48
C:\5010473911_GB100\5010473911ILCE9M2UC2\01GB-ILCE9M2UC2\030BAS.indd
DTP data saved: 2019/07/26 10:20
PDF file created: 2019/07/26 10:21
Continuous shooting
Shoots images continuously while you press and hold down the shutter
button.
Turn the drive mode dial and select the desired mode.
• Turn the drive mode dial while pressing the drive mode dial lock release
button.
Continuous Shooting: Hi/ Continuous Shooting: Mid/
Continuous Shooting: Lo
Shutter Type
Mechanical Shutter Auto/Electronic Shutter*
1
Continuous Shooting: Hi
10 images per second
at maximum*
2
20 images per second at
maximum *
2
*
3
*
4
Continuous Shooting: Mid
8 images per second
at maximum*
2
10 images per second at
maximum*
2
Continuous Shooting: Lo
3 images per second
at maximum
5 images per second at
maximum*
2
*
1
The value shown is the shooting speed when [Aperture Drive in AF] is set to
[Standard]. When [Aperture Drive in AF] is set to [Focus Priority], the speed of
continuous shooting may become slower.
*
2
The focus is locked to the setting in the first shot when [Aperture Drive in AF]
is set to [Standard] or [Silent Priority], and the F-value is greater than F16.
*
3
When the Focus Mode is set to AF-C (Continuous AF), the speed of
continuous shooting varies depending on the attached lens. For details,
check the support page on compatible lenses.
*
4
During uncompressed RAW shooting, 12 images are shot per second at
maximum.
Hint
• To continuously adjust the focus and exposure during continuous shooting,
set as follows:
– [Focus Mode]: [Continuous AF]
– [ AEL w/ shutter]: [Off] or [Auto]