F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB01COV-WW.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB02SafeRegWW.fm Owner’s Record The model and serial numbers are located at the bottom of the base station. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. LF-X1 Serial No.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB02SafeRegWW.fm WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB02SafeRegWW.fm masterpage: Left NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_ankishinse\00GB03SafeRegTOC.fm masterpage: Right Table of Contents Locating the Components ...................................................................................... 6 Checking the Package Contents ............................................................................ 9 Connecting a Cable or an Antenna ...................................................................... 10 Connecting Video/Audio Equipment .........................................
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Locating the Components Monitor Right side 1 2 3 4 5 6 7 8 1 LCD (Liquid Crystal Display) 2 POWER indicator Lights green when the power is on. 3 WIRELESS indicator Indicates the status of wireless communications. Lights blue: Communications using the 5 GHz channel are in progress. Lights green: Communications using the 2.4 GHz channel are in progress. Off: No radio waves are being output.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Locating the Components Top qf qg qh qj qk qf Stylus pen compartment qg POWER switch Turns on and off the power to the monitor. qh VOLUME +/– buttons Adjusts the volume of the speakers. qj CAPTURE button Saves the currently displayed screen in an album as a still image. qk INDEX button Displays the Index window.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Base Station Front 1 2 3 4 5 Rear 6 qf 7 qd 8 qs 9 qa 0 1 WIRELESS indicator Indicates the status of wireless communications. Lights blue: Communications using the 5 GHz channel are in progress. Lights green:Communications using the 2.4 GHz channel are in progress. 2 LINE indicator Indicates the connection status to an external network such as the Internet. Blinks green: Connection is being made.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm Connecting a Cable or an Antenna Connecting a TV and Cable/ Antenna When you have connected your TV to the CATV cable or antenna, use this hookup. With this hookup, set Cable to OFF in the Auto CH Program window of Settings TV/Video. 1 2 3 4 Turn off the power of your TV and remove the antenna or CATV cable from the antenna input of your TV.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Connecting Video/Audio Equipment 4 Using the audio/video cable, connect the audio and video OUT jacks of the VCR to the VIDEO LINE INPUT AUDIO and VIDEO jacks of the base station. Connecting a VCR and Cable Box Use this hookup if your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm 6 masterpage: Left Using the audio/video cable, connect the audio/video OUT jacks of the VCR to the VIDEO LINE INPUT AUDIO and VIDEO jacks of the base station. Connecting a Satellite Receiver and a DVD Player 1 Disconnect all power sources. 2 Connect the satellite antenna cable to the SATELLITE IN connector of the satellite receiver.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Turning On the Power Turning On the Power Connecting the Power Cord Connect the power cord after finishing all other connections.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm Turning On the Power 1 Press POWER on the front of the base station to turn on the base station. masterpage: Left Charging the Monitor Battery To charge the monitor battery, connect the supplied AC power adaptor for the monitor to the monitor. You can use the monitor even while it is being charged. During charging, the e (charge) indicator on the left panel of the monitor lights red. The indicator goes off when charging is finished.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Connecting to the Internet Connecting to the Internet This section offers examples and explanations of several common methods for connecting to the Internet. Because the best connection method for you will depend on the Internet service provider and connection devices you use, check with your Internet service provider or network administrator for more information.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Connecting several devices to a modem with a router Cable modem, ADSL modem, etc. Router* To Internet LAN cable (not supplied) to the LAN port LAN cable (not supplied) : Signal flow Computer Computer Caution • Depending on your Internet service contract, you may not be able to connect multiple devices, such as several computers and an Airboard.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Configuring Network Settings Configuring Network Settings Configure your network settings according to the documents provided by your Internet service provider. Before configuring network settings Check that: • The base station power is turned on. • The base station and monitor have established a wireless connection. • The LAN cable is connected to the base station, when connecting by LAN.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm 6 Select [Settings] to the right of [LAN (DHCP/Manual IP address setting)]. 3 LAN (DHCP/Manual IP address setting) masterpage: Left Refer to the documents provided by your Internet service provider to input the proper values for “IP Address,” “Subnet mask,” “Default gateway,” “DNS 1,” “DNS 2,” and “Host name,” and then press [OK]. Remove this check mark. The [LAN (DHCP/Manual IP address setting)] window appears.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Configuring Network Settings Connecting via LAN (PPPoE) 6 Press [LAN (PPPoE)]. LAN (PPPoE) 1 Press [Settings] on the lower right of the screen. If the [Settings] window is not displayed on the lower right of the screen, touch the screen lightly and it will appear. 2 Press [Internet connection]. 3 Press [Base station]. 4 5 Press [Settings] to the right of [LAN (PPPoE)].
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm 8 Specify the interval for checking if there is new mail, in the range from 0 to 999 minutes. 9 Select the size of characters for mail text on the screen. 0 Press [OK]. Setting Up for Mail You cannot send and receive mail (e-mail) unless you program the unit with information about your Internet Service Provider (ISP). Program the necessary information according to the document supplied by the provider.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Watching TV and Video Watching TV and Video Open the Index window, then select a desired channel. To adjust the volume, press VOL +/– on the top of the monitor. z Tips • You can turn on the monitor by pressing POWER on the remote control. You may directly press channel number buttons or [CH +/–] on the remote control to turn on the monitor and select a channel.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Basic TV/Video Screen Parts and controls on the TV/Video screen A B C D TV/video mode indication TV channel number TV station name Multi-language mode indication When a multi-language program is tuned in, [Main], [Sub], or [Main/Sub] is displayed. When a stereo program is tuned in, [Stereo] is displayed.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Viewing Web Pages Viewing Web Pages This section explains how to open the Internet window and display web pages. Let us assume that you will access the Sony’s web site whose URL is http://www/sony.com/. 1 Open the [Index] window, then press [WWW]. The Internet window appears. 2 Press a new tab, then press the URL entry field. New tab 3 URL entry field Using the keyboard, enter http:// www.sony.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Basic Internet Screen Parts and Controls on the Internet Screen A Internet icon Moves when a web page is being downloaded. B Internet indication C URL entry field The URL of a currently opened web page is displayed. To open another web page, press a new tab, then enter a URL. D (SSL) icon Appears when a web page handling SSL (Secure Socket Layer) is currently opened.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Using E-mail Using E-mail Select e-mail. You can compose, send, and receive e-mail by switching to the e-mail screen. The e-mail screen appears. Basic E-mail Screen Inbox/Outbox screen A E-mail display B Inbox tab Displays a list of incoming e-mail (i.e., email that was sent to you). A preview of e-mail content for the selected list is continually displayed in the lower frame.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm D Filing cabinet tab Appears when a “Memory Stick” is inserted. Allows you to arrange the e-mail you have sent and received. E Sort button Allows you to sort your e-mail by each attribute: address, date and time, or subject. With each touch of the sort button, e-mail is sorted in ascending or descending order.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Basic E-mail Screen E-mail composition screen A Main text field The main e-mail text is input here. B Subject The title of the e-mail is input here. C Image attachment This attaches an image to the e-mail. D Create memo This attaches a hand-written picture or note to the e-mail. E Address field The e-mail address of the addressee is input here. F Send Immediately sends the composed e-mail message.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm 2 Viewing Enlarged Images masterpage: Left To quit the enlarged view, lightly press the image. This returns you to the [Image list] screen. z Tip 1 You can also return to the [Image list] screen by pressing INDEX on the monitor. Directly press the image you want to enlarge. Press an image (do not press the .) An enlarged view of the image appears. Caution It may take several tens of seconds to enlarge some images.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Basic Digital Photo Album Screen Basic Digital Photo Album Screen A Digital photo album display B Storage cabinet tab Displays a list of images saved on the Airboard or a “Memory Stick”. C Filing cabinet tab Appears when a “Memory Stick” is inserted. Allows you to arrange the images you have saved.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Specifications System Inputs/outputs Television system NTSC Channel coverage VHF: 2 - 13, UHF: 14 - 69, CATV: 1 - 125 Tuning system PLL synthesizer Screen size 12.1 inches 24.9 × 18.7 cm (9 7⁄ 8 × 7 3⁄ 8 inches), 31.1 cm (12 1⁄ 4 inches) (w/h, diagonal) Display Transparent TN LCD panel Drive system TFT Active matrix drive system Effective picture element ratio 99.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Right Specifications AC power adaptor General AC-LX1B (for the base station) Power requirements 100 V - 240 V AC, 50/60 Hz Rated output DC OUT: 12 V DC, 3 A Operating temperature 32 to 95 °F (0 to 35 °C) Storage temperature 14 to 140 °F (–10 to +60 °C) Dimensions Approx. 99.5 × 42.5 × 25.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeRegWW.fm masterpage: Left Battery duration Approx. 4 hours (with the minimum screen brightness) Approx. 3 hours (with the medium screen brightness) Approx. 100 minutes (with the maximum screen brightness) Battery charging time Approx. 2.5 hours (monitor power on) Approx.
F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB99BCO-WW.
