Manual

Cannot cycle through [3 Be sure the Video Label option is not set to Skip (see page 28).
the other video
equipment connected
to the TV
Screen Mode feature [3 Screen Mode is available only for digital 16:9 programming in
does not function digital tuning mode. See page 17 for details.
VIDEO 3 input [3 VIDEO 3 inputs accept only 480i signal formats. Be sure the
problems comrected device is not set to output a format 480p or higher.
Audio
Good picture, no [3 Press M_v_so that Muting disappears from the screen. Your TV
sound may be set to Auto SAP in the MTS option within the Setup
Menu.
B
........................... press VOL+ t0 adjust your TVIs volume. .....................
Low or no audio [3 Some cable boxes have volume level controls. Check and see if
(TV and cable box) your cable box remote has a volume control.
Channels
I cannot receive [3 Make sure Cable is set to Off in the Channel Setup Menu
higher number (page 22).
channels (UHF) when [3 Perform Auto Program to add channels that are not presently in
using an antenna memory (page 13).
Cable stations don't [3 Make sure Cable is set to On in the Channel Setup Menu
seem to work (page 22).
[3 Perform Auto Program to add channels that are not presently in
memory (page 13).
I have no digital [3 You may not have any digital channels available. Try running
channels the Auto Program feature to search for digital channels (see
page 31). If there are none available, press the _ button to
switch to analog mode.
Contacting Sony
Before calling our Customer Information Services Center or visiting our website, r_,set the TV to factory settings (see
page 13). Please have your TV serial number read_: The number is located on the rear of your TV and on the front
cover of this manual.
Our Customer Information Services Center phone number is 1-800-222-SONY (7669) (US residents only) or 1-877-899
SONY (7669) (Canadian residents only). Our wf,bsite is http://www.sony.com/TV support.
37