32nx200Ucover.
32nx200Ucover.fm Page 2 Monday, September 16, 2002 11:53 AM NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM For KD-32NX200U models A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e. marked with T or ) must be used.
NX1-8.fm Page 1 Monday, September 16, 2002 12:24 PM Thank you for choosing this FD Trinitron Integrated Digital Television Before operating the TV, please read this instruction manual thoroughly and retain it for future reference.
NX1-8.fm Page 2 Monday, September 16, 2002 12:24 PM Safety information 2 This set is to operate on a 220-240V AC supply only. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Disconnect from the mains. Never push objects of any kind into the set as this could result in a fire or electric shock.
NX1-8.fm Page 3 Monday, September 16, 2002 12:24 PM Table of contents Getting started Checking the accessories supplied.................................................................................................. 4 Inserting batteries into the remote control ...................................................................................... 4 Connecting an aerial and a VCR to the TV...................................................................................... 5 Switching on the TV ........
NX1-8.fm Page 4 Monday, September 16, 2002 12:24 PM Getting started Follow steps 1 - 7 to install your TV and view the TV programmes. 1 Checking the accessories supplied VIDEO / DIGITA TV / MEMORY STICK L 1 4 7 E GUID VTR 2 3 5 6 8 9 0 TV DVD DE MO IN DE RF Loopthrough cable X PROG MENU Batteries Remote control 2 Inserting batteries into the remote control 1. Place a coin in the slot at the bottom of the remote control. Turn anti clockwise to release the battery compartment.
NX1-8.fm Page 5 Monday, September 16, 2002 12:24 PM Getting started Connecting an aerial and a VCR to the TV 3 Connecting an aerial only 1. Connect your existing aerial lead to the digital socket marked on the rear of the TV as shown. 2. Connect the supplied RF loopthrough cable from the socket marked to the analogue socket marked . 1. Connect your existing aerial lead to the digital socket marked on the rear of the TV as shown. 2.
NX1-8.fm Page 6 Monday, September 16, 2002 12:24 PM Getting started 5 Automatically tuning the TV 1. When you switch on the TV for the first time, the Sony logo appears on the TV screen followed by the ‘Memory Stick’ logo, then the Language/Country menu with the word ‘English’ highlighted. Press the V or v buttons on the remote control to highlight your required language. Press the OK button to confirm your choice. From now on all menus appear in your chosen language. 2.
NX1-8.fm Page 7 Monday, September 16, 2002 12:24 PM Getting started 6 Switching between digital and analogue programmes 1. AL IGITITAL DDIG Press the DIGITAL/ button on the remote control to switch between digital and analogue mode. Notes: If the TV is in digital mode an information banner appears briefly on screen when you change channels. If the TV is in analogue mode the channel number appears in green lettering when you change channels.
NX1-8.fm Page 8 Monday, September 16, 2002 12:24 PM Getting started Overview of the TV buttons The TV buttons can be found on the control panel on the front of the TV. An expanded view is shown below. MONO L/G/S/I MEMORY STICK S 4 4 R/D/D/D 4 + P + Note: When the ‘Memory Stick’ is reading or wriiting data, the memory stick indicator lights up in red. Data stored on a ‘Memory Stick’ may become damaged or erased if you remove the ‘Memory Stick’ during this time.
NX9-13.fm Page 9 Monday, September 16, 2002 12:29 PM Basic operation Overview of the remote control buttons / Mute button Press to mute the sound. Press again to restore. DIGITAL/ button Press to switch between digital and analogue mode. VIDEO / 4 7 Buttons 0 - 9 Press to input the required channel number. For numbers 10 and above, enter the second digit within 2 seconds. GUID TV / / TV button Press to switch off your TV temporarily. The red indicator on the front of the TV illuminates.
NX9-13.fm Page 10 Monday, September 16, 2002 12:29 PM Basic operation Viewing a digital text service Most digital TV channels broadcast information via their text service. This digital service includes high quality text and graphics along with advanced navigation options. Additionally, this TV has access to dedicated text channels transmitted by the broadcasting authorities. The appearance, content and navigation methods of all digital text services are decided by the broadcaster.
NX9-13.fm Page 11 Monday, September 16, 2002 12:29 PM Basic operation Viewing traditional teletext Most analogue TV channels broadcast a text service. The index page (usually page 100) provides information on how to use the service. Please ensure you are receiving a strong signal or some text errors may occur. Switching on the text service 1. Select the TV channel that carries the text service you wish to view. 2. Press the button to enter Picture and Text (P&T) mode.
NX9-13.fm Page 12 Monday, September 16, 2002 12:29 PM Basic operation Viewing a traditional text service Using the text menu You can access more features by using the text menu: 1. Press the mode. 2. With the text display on screen, press the MENU button to display the ‘Teletext’ menu. 3. Press the V or v button to highlight your desired feature, then press the b button to select. 4. Press the MENU button to remove the ‘Teletext’ menu from the screen.
NX9-13.fm Page 13 Monday, September 16, 2002 12:29 PM Basic operation Changing the screen format manually The broadcaster may transmit programmes in more than one format (e.g. 4:3 format or Widescreen format). You can change the screen format manually to suit the broadcast you are watching. Press the button on the remote control to choose one of the 5 formats listed below. Wide- For 16:9 broadcasts. For 4:3 broadcasts.
NX14-23.fm Page 14 Monday, September 16, 2002 12:55 PM Digital features The Digital Info display This display gives you information for the current programme being shown and for the next scheduled programme. 1. Press the button on the remote control to view the Info display. If the display does not appear, press the DIGITAL/ button to switch to digital mode, then press the button to view the Info display. 2. Press the b button to obtain a brief description of the next programme in the schedule.
NX14-23.fm Page 15 Monday, September 16, 2002 12:55 PM Digital features The Main menu The Main menu contains several features that allow you to customise the digital side of the TV. The Main menu is only available when watching digital channels. To check you are in digital mode, press the DIGITAL/ button on the remote control. An information banner appears briefly on screen when you change channels. If the banner does not appear, press the DIGITAL/ button.
NX14-23.fm Page 16 Monday, September 16, 2002 12:55 PM Digital features The Main menu Parental Control This feature allows you to set an age limit for viewing programmes. If any films or programmes classed above the age limit you have set are broadcast, you will be requested to enter a PIN code before viewing is allowed. If you have not already set a PIN code: 1 2 3 4 5 6 8 9 7 1. Press the button on the remote control to obtain the Digital Info display.
NX14-23.fm Page 17 Monday, September 16, 2002 12:55 PM Digital features The Main menu Manual Tuning This feature allows you to manually add digital channels one by one to your TV. OK 1. Press the button on the remote control to obtain the Digital Info display. Press the BLUE button to display the Main menu. 2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to display the Detail Set-up menu. 3.
NX14-23.fm Page 18 Monday, September 16, 2002 12:55 PM Digital features The Main menu Software Download Periodically Sony will issue updates for the software that controls your TV. This feature will allow you to automatically receive updates through your existing aerial. OK 1. Press the button on the remote control to obtain the Digital Info menu. Press the BLUE button to display the Main menu. 2.
NX14-23.fm Page 19 Monday, September 16, 2002 12:55 PM Digital features The Main menu CAM Setup (depending on availability of service) This feature allows you to access a pay-TV service once you have obtained a Conditional Access Module (CAM) and a viewing card. Please contact a pay-TV supplier for details. OK 1. Switch off the TV and unplug from the mains. 2. Insert the CAM into the socket on the rear of the TV as shown. Take care not to damage the CAM when inserting.
NX14-23.fm Page 20 Monday, September 16, 2002 12:55 PM Digital features The Channel Index menu The Channel Index menu provides a quick and easy way to:a) View a complete list of programmes available for selection b) Obtain a preview of the programmes contained in the list c) Create a list relating to a category of programme, e.g. Sports or Movies d) Store programmes into a personal favourite list 1. The Channel Index menu is only available in digital mode.
NX14-23.fm Page 21 Monday, September 16, 2002 12:55 PM Digital features The Channel Index menu The Category pop-up list The Category pop-up list allows you to search for programmes quickly by dividing the channels into different categories. For example, if you select ‘News’ from the Category pop-up list, then only programmes related to News will be shown in the Channel Index menu. 1. With the Channel Index menu on screen, press the YELLOW button to display the Category pop-up list. 2.
NX14-23.fm Page 22 Monday, September 16, 2002 12:55 PM Digital features The EPG menu The EPG menu (Electronic Programme Guide) provides a quick and easy way to:a) View a complete list of the programmes available. b) Obtain a preview of the programmes currently being broadcast. c) Create a list relating to a category of programme, e.g. Sports or Movies. d) Record programmes. 1. The EPG menu is only available when watching digital channels.
NX14-23.fm Page 23 Monday, September 16, 2002 12:55 PM Digital features The EPG menu To select a programme for recording or timed display 1. With the EPG menu on screen, press the V, v, B or b buttons to highlight a future programme in the EPG menu that you wish to record, then press the OK button. The Timer screen appears. 2.
NX 24-33.fm Page 24 Monday, September 16, 2002 2:04 PM TV menu system The following pages explain the TV set up menus and their operation. Although most of these menus can be accessed whilst watching digital programmes, we recommend you view them in analogue mode. To check which mode you are in, press the button on the remote control. If you are watching a digital programme, an Info display appears on screen providing brief details for the current and next programme.
NX 24-33.fm Page 25 Monday, September 16, 2002 2:04 PM TV menu system Sound Adjustment menu This menu allows you to customise the sound. Highlight the required option and press b to select. The table below explains each option and how to use it. Option Sound Effect This option allows you to select one of four sound modes. Equaliser Adjustment This option allows you to customise the sound by adjusting five frequency bands. Note: This feature is only available when Sound Effect is set to Personal.
NX 24-33.fm Page 26 Monday, September 16, 2002 2:04 PM TV menu system Features menu This menu allows you to set the sleep timer and to set a signal to be output from the AV3 socket. The table below explains each option and how to use it: Auto Format With this option switched on, the TV can automatically adjust the picture size to suit the broadcast. Press V or v to select ‘On’ or ‘Off’. Press OK to confirm.
NX 24-33.fm Page 27 Monday, September 16, 2002 2:04 PM TV menu system Manual Set Up menu This menu gives you access to more advanced features. The options are: Language/Country When you first installed the TV you were asked to select your language and country. The ‘Language/Country’ option in the ‘Manual Set Up’ menu allows you to change these settings. With the ‘Language/Country’ option highlighted, press b to enter the ‘Language/Country’ menu. Press v or V to select ‘Language’ or ‘Country’.
NX 24-33.fm Page 28 Monday, September 16, 2002 2:04 PM TV menu system Manual Programme Preset menu (for analogue channels only) To check which mode you are in, press the button on the remote control. If you are watching a digital programme, an Info display appears on screen providing brief details for the current and next programme. If this happens, press the DIGITAL/ button on the remote control to switch to analogue channels.
NX 24-33.fm Page 29 Monday, September 16, 2002 2:04 PM TV menu system Further Programme Preset menu (for analogue channels only) To check which mode you are in, press the button on the remote control. If you are watching a digital programme, an Info display appears on screen providing brief details for the current and next programme. If this happens, press the DIGITAL/ button on the remote control to switch to analogue channels.
NX 24-33.fm Page 30 Monday, September 16, 2002 2:04 PM Memory Stick operation Viewing Memory Stick pictures A ‘Memory Stick’* is a new recording medium with a data capacity that exceeds a floppy disk. It is specially designed for exchanging and sharing digital data among ‘Memory Stick’ compatible products. Use ‘Memory Stick’ to display JPEG pictures (DCF version 1.0 format)** individually or as a slideshow presentation on the TV screen.
NX 24-33.fm Page 31 Monday, September 16, 2002 2:04 PM Memory Stick operation Index This feature enables you to view on screen the JPEG DCF format pictures from your memory stick. Memory Stick Index Page + Page 1/3 AL IGITITAL DDIG 1. Press the MEMORY STICK button on the remote control to display the ‘Memory Stick’ menu on the TV screen. 2. Press the V or v button to highlight ‘Index’ then press the OK button to display the ‘Memory Stick Index’ screen. 3.
NX 24-33.fm Page 32 Monday, September 16, 2002 2:04 PM Memory Stick operation Setup This feature allows you to (1) set the length of time for a picture to be displayed during a slideshow, (2) set a slideshow to continuously repeat, (3) display file information and (4) rotate a picture on screen AL IGITITAL DDIG 1. Press the MEMORY STICK button on the remote control to display the ‘Memory Stick’ menu on the TV screen. 2.
NX 24-33.fm Page 33 Monday, September 16, 2002 2:04 PM Memory Stick operation Adjusting settings of Memory Stick pictures You can adjust the contrast, brightness, colour and sharpness settings of memory stick pictures whilst they are displayed on the TV screen. 1. Display a memory stick picture on screen (see ‘Index’ section on page 30). 2. Press the MENU button to display the ‘Picture Adjustment’ menu. 3. Press the b button to enter the ‘Picture Adjustment’ menu.
NX34-44.fm Page 34 Monday, September 16, 2002 2:37 PM Connecting other equipment Connecting Other Equipment to the TV A wide range of equipment can be connected to the TV through the front and rear sockets. Connecting equipment to the rear sockets C B E (SMARTLINK) 3 s 3 VCR 2 DVD 1 DIGITAL OPTICAL OUTPUT ANALOGUE MODEM R/D/D/D VCR . . . 5V 200mA L/G/S/I D A MD/DAT DVD Hi-Fi Decoder/Set top box Note: Connecting cables are not supplied. Connecting a DVD player AL IGITITAL DDIG 1.
NX34-44.fm Page 35 Monday, September 16, 2002 2:37 PM Connecting other equipment Connecting equipment to the rear sockets C B E (SMARTLINK) 3 s 3 VCR 2 DVD 1 DIGITAL OPTICAL OUTPUT ANALOGUE MODEM R/D/D/D VCR . . . 5V 200mA L/G/S/I D A MD/DAT player DVD Hi-Fi Decoder/Set top box Note: Connecting cables are not supplied. Connecting a MD/DAT player AL IGITITAL DDIG 1. Connect a suitable optical lead from the E socket of the TV to the optical socket of your MD/DAT player. 2.
NX34-44.fm Page 36 Monday, September 16, 2002 2:37 PM Connecting other equipment Connecting equipment to the front sockets Headphones Camcorder H MONO L/G/S/I MEMORY STICK S 4 4 I R/D/D/D 4 + P + MONO L/G/S/I S MEMORY STICK F 4 4 R/D/D/D 4 + P + G PlayStation Note: Connecting cables are not supplied. Connecting a PlayStation AL IGITITAL DDIG 1. Connect the lead supplied with your playstation to the sockets H (video input), and I (left and right audio input). 2.
NX34-44.fm Page 37 Monday, September 16, 2002 2:37 PM Connecting other equipment Using the remote control with VCR and DVD players This remote control has been configured to operate not only Sony DVDs and VCRs but also those made by other manufacturers. To operate other makes of DVD and VCR using this remote control, complete the following procedure: 1 2 3 4 5 6 8 9 7 1. Find the 3 digit code for your brand from the list below.
NX34-44.fm Page 38 Monday, September 16, 2002 2:37 PM Additional Information Specifications TV System I/DVB-T Colour System PAL NTSC 3.58, 4.43 (only Video In) MPEG-2 MP@ML Channel Coverage UHF: B21 - B69 Picture Tube KV-32NX200 KV-36NX200 FD Trinitron Approx. 82cm FD Trinitron Approx.
NX34-44.fm Page 39 Monday, September 16, 2002 2:37 PM Additional Information Troubleshooting Here are some simple solutions to problems which may affect the picture and sound. Problem Possible causes Solutions No picture, no sound. • Power off • Plug in the TV. • TV in standby. • button on the front of the TV. If the Press the indicator is on press the button on the remote control. • Aerial disconnected. • Check aerial connection. Poor or no picture (screen is dark), but good sound.
NX34-44.
NX34-44.
NX34-44.
NX34-44.
NX34-44.
32nx200Ucover.
32nx200Ucover.