Reference Guide

8
US
• The screws for installing the Wall-Mount
Bracket to the TV are not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
• Refer to the following table for
wall-mount hole pattern.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied safety documentation for
additional safety information.
• For more detailed information, visit Sony
Customer Support website.*
* Only for limited region/country/model.
1 Remove the screws from the rear of
the TV.
2 Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of
the TV (to make it parallel with the
wall).
3 Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
Model Name
Wall-mount hole
pattern
×
KD-75X80K /
75X80CK
300 × 300 mm
KD-65X80K /
65X80CK
300 × 300 mm
KD-55X80K /
55X80CK
300 × 300 mm
KD-50X80K 200 × 200 mm
KD-43X80K 200 × 200 mm
VS
Screw (M6)
Wall-Mount Bracket
10 mm – 12 mm
VS
1.5 N·m
{15 kgf·cm}
Wall-Mount Bracket
(not supplied)
Screw
(not supplied)