Wall-Mount Bracket: SU-WL855

− 8 (US) −
 Attaching the Wall-Mount
Bracket to the Dry Wall with Studs
WM1
WM4
Installing the Lateral Shift
Bracket to the Wall
1 Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Display and is capable of
supporting a weight of at least six times
that of the TV or LCD Display.
• Refer ”Measurement for Lateral Shift
Bracket installation on the wall“ on page
20.
• Refer to your TV’s or LCD Display's
Reference Guide for the TV’s or LCD
Display's weight.
Note

When your TV or LCD Display is installed on the
wall, the upper side of the TV or LCD Display
slightly leans forward.

We recommend you to check the position of TV or
LCD Display in the viewing environment.
2
3 Align
WM4
to the wall and make
four marks aligned with the
studs.
× 4
WM4
Note

Use a level to check whether
WM4
is level.
4 Drill upper pilot holes on the
marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least six times that of the TV or
LCD Display.
× 2
75 mm
(3 inch)
5.5 mm
(7/32 inch)
Note

Pilot holes must be drilled to a depth of 75mm
(3inch), using a 5.5mm (7/32inch) diameter drill
bit.