4-748-606-11(1) Television Reference Guide KD-65A8G / 55A8G
To attach the Table-Top Stand, refer to the Setup Guide. Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note Table of Contents • Before operating the TV, please read the “Safety Information” (page 2). • Read the supplied Safety Information for additional safety information. • Instructions about “Installing the TV to the Wall” are included within this TV’s instruction manual.
• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the Wall-Mount Bracket to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the Wall-Mount Bracket. The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.
Protecting the TV Screen (OLED TV) Precautions to Protect the Screen from Damage Image retention OLED TV‘s are susceptible to image retention (burn-in) due to the characteristics of the materials used. Image retention may occur if images are displayed in the same location on the screen repeatedly or over extended periods of time. This is not a malfunction of the TV. Avoid displaying images that may cause image retention.
Parts and Controls Controls and Indicators ȩ ̕ (Power) / + / – When the TV is off, Press to power on. When the TV is on, Press and hold to power off. Press repeatedly to change the function, then press + or – button to: • Adjust the volume. • Select the channel. • Select the input source of TV. Remote Control sensor* / Light sensor* / Illumination LED The illumination LED lights up or blinks according to the status of the TV. For more information, refer to the Help Guide.
Using Remote Control Remote Control Parts Description The remote control shape, location, availability and function of remote control buttons may vary depending on your region/country/TV model. (Microphone) Use voice search*. (e.g., Search various content by voice.) MIC EXT.BOX MENU Display the connected External Box (cable/satellite box) menu. • For models with supplied IR Blaster, connect and set up the IR Blaster (page 9).
Google Play Access the “Google Play” online service. NETFLIX (Only on limited region/ country/TV model) Access the “NETFLIX” online service. Colour buttons Execute corresponding function at that time. ACTION MENU Display a list of contextual functions. GUIDE/ Display the digital programme guide, or EPG of External Box (cable/satellite box) after setting [IR Blaster setup] (IR Blaster compatible models only).
Connection Diagram For more information on connections, refer to the Help Guide by pressing HELP on the remote control.
/ VIDEO IN HDMI IN 1/2/3/4 • For a composite connection, use an Analogue Extension Cable (not supplied). • • HDMI interface can transfer the digital video and audio on a single cable. • < 12 mm < 21 mm 3.5 mm 1: L 2: Video 3: Ground 4: R AUDIO OUT 1 2 3 4 / • Supports 3-pole stereo mini jack only. • To listen to the TV's sound through the connected equipment, press HOME. Select [Settings] [Sound] [Headphone/Audio out] and then select the desired item.
Using Sound Bar (not supplied) Recommended (in front of the TV) Place the sound bar (not supplied) in front of the TV's Table-Top Stand. Recommended sound bar: HT-Z9F* (not supplied) Alternate (on the Table-Top Stand) If there is not enough space to place the sound bar in front of the TV, attach the rubber feet (supplied with the TV) to the bottom of the sound bar (not supplied) and place the sound bar on top of the Table-Top Stand. * Only on limited region/country.
Installing the TV to the Wall Using the optional Wall-Mount Bracket (SU-WL850 or SU-WL450) To Customers: For product protection and safety reasons, Sony strongly recommends that installation of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Troubleshooting General troubleshooting for issues like: black screen, no sound, frozen picture, TV does not respond, or network is lost, do the following steps. 1 Restart your TV by pressing the power button on the remote control until a message appears. The TV will restart. If the TV does not recover, try unplugging the AC power cord (mains lead). Then press the power button on the TV and wait for two minutes, and plug in the AC power cord (mains lead).
You are concerned about image retention. If the same image is displayed repeatedly or for long periods of time, image retention may occur. To reduce image retention, we recommend that you turn off the TV normally by pressing the power button on the remote control or the TV. Note • Perform Panel refresh manually only when image retention is particularly noticeable. As a reference, perform it only once a year. Avoid performing it more than once a year because it may affect the usable life of the panel.
1, 2, 3 USB port 1 and 2 support High Speed USB (USB 2.0) USB port 3 supports Super Speed USB (USB 3.1 Gen 1) LAN 10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. The communication rate and quality are not guaranteed.
• “BRAVIA”, and BRAVIA Sync are trademarks or registered marks of Sony Corporation. • Gracenote, the Gracenote logo and logotype, “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/ or other countries. • Vewd® Core. Copyright 1995-2019 Vewd Software AS. All rights reserved. • Google, Google Play, Chromecast, YouTube, Android TV and other related marks and logos are trademarks of Google LLC.