Instruction Manual

23
Setup
Installing the TV
1 Connect the display interface cable (supplied) to the display unit’s DISPLAY
SIGNAL IN jack, and connect the AC power cord (supplied) to the display
unit’s AC IN jack.
Disconnect all power sources before making any connections.
2 Secure the AC power plug to the display’s AC IN jack.
When you unplug the AC power cord, drag the AC plug holder
down by pushing both sides of the holder, then pull out the
plug.
BLACK WHITE
DISPLAY SIGNAL IN
SONY EXCLUSIVE CABLE ONLY AC IN
Display interface
cable (supplied)
Tighten the
screw slowly
until the screw
is stabilized.
AC Power cord
(supplied)
AC IN (Power
supply input)
jack of the
display
AC plug holder
(supplied)
AC power cord
(supplied)
1 Attach the AC plug holder
(supplied) to the AC
power cord.
2 Clip on to the AC IN
jack until you hear
clicking.